How Can I set my speed of clip to 0%?

How Can I set my speed of clip to 0%?
I can't do that. A minimum value is: 1.00

So I HAVE TO do this in that specific way? I can't normally set a "0%" value of speed curve?
Ann Bens wrote:
Cut it there and do a frame hold or a screen grab.
But how I have to do a frame hold if I can't set speed of one frame to 0%
Ann Bens wrote:
Use a time remapping freeze frame instead if you want 0 speed.
What a rubbish did you say? I am in Time remapping freeze menu and IN THIS MENU we can't set a value to 0%. A value: 1.00% is a minimum.
You have to miss a screen what I paste before, so specially for you (there is even a red box):

Similar Messages

How can I set keyframes on a clip segment? (FCP 7)

Hello!
I am trying to set keyframes on a segment of a clip using the pen tool on time line. When I set the first keyframe, one also appears at the start of the clip and when I set the second keyframe, another appears at the end of the clip? There is a thin blue horizontal line the full length of the clip. Whatever speed change I make on the dialogue box, overrides the segment settings. I have already carried out this successfully on a different clip.
Regards,
DG

I gather you're adding speed keyframes. That's the way the application works. Because variable speed changes effect the entire media, not just the marked In and Out in the timeline, keyframes are added at the beginning and end of the clip. The blue line in the Clip Keyframe graph is correct. It indicates a motion keyframe has been applied. Speed is a motion keyframe.
What dialog box are you using? Speed segment changes are made in the timeline from the shortcut menu. Select Change Speed Segment.

Everytime I start firefox my speed dials are emtpy, how can I set my speed dial to keep what I put on it

'''I have set up my speed dial with my favorite websites but everytime I go out of my firefox browser then start it up again my speed dial shows up as empty...why is this?'''

In case you are using "Clear history when Firefox closes":
*do not clear Browsing History
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] Clear history when Firefox closes > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

How can I set up a calling card on speed dialing?

I use a company calling card for international dialing. How can I set up a speed dial for the dial number and the password with a pause in between for the international number? Any clues?

speed dial: Your smartphone can store nine
phone numbers that you can call
with a single keypress. To store a
speed dial number, touch Phone
> Menu > Speed dial setup, and
insert a number in an empty speed
dial slot.
To call a speed dial number, touch
and hold the single-digit speed dial
number in the dialer screen.

HT3775 I can not open a video movie clip, the system ask for a codec, how can a set up that automatlicly

I can not open a video movie clip, the system ask for a codec, how can a set up automatlicly?

The problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

How can i make a transition between clips on cutaway?

how can i make a transition between clips on cutaway?

ninafromlisboa wrote:
But if I want ONLY fade out (or in) I can't do it...
OK, I understand what you mean now! I assumed you were asking about the normal Fade In or Fade Out using the transition from the Transitions panel. But I guess you mean the Fade function specific to a Cutaway. When you double-click on a Cutaway the Inspector opens. Here you can set the Cutaway Fade duration. But as you say, it only provides for both fade in and fade out as one operation - you can't set the fades individually (it's both or nothing).
BUT, try the method outlined by Karsten Schluter above. It will give you the same effect and will enable you to fade either side of the Cutaway (or add other transitions).
John

How do I set up speed dial? My contacts ported over from my old phone, but the speed dial settings are gone. I find nothing in the phone or in the manuals on how to set up speed dial.

How do I set up speed dial? My contacts ported over from my old phone, but the speed dial settings are gone. I find nothing in the manual or online about speed dial.

BToddP, I completely understand wanting to customize your phone the way you once had it on your old phone. Fear no longer, help has arrived! Please review this link for additional assistance: http://spr.ly/6588AEzw Let us know if you need any further assistance. Thanks!
KristieQ_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

How can i SLOW [not speed] scrolling speed in Windows FF?

How can i SLOW [not speed] scrolling speed in Windows FF?

I'm not very familiar with trackballs, but I'll add a comment regarding the keyboard part.
''ameame [[#answer-722079|said]]''
<blockquote>
When i press my spacebar or keyboard arrow key, [all] pages scroll too fast.</blockquote>
On my Firefox, the spacebar skips down a screenful at a time, like the PgDn key. When that repeats, it's certainly going to cover a lot of ground, and a lot faster than the down arrow key. But pressing the spacebar a few times can be efficient if you don't hold it down continuously.
The distance covered by the up and down arrow keys can be modified using a different preference:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''scroll''' and pause while the list is filtered
(3) Scroll all the way down to '''toolkit.scrollbox.verticalScrollDistance''' which usually has a default value of '''3'''
* If the preference is bolded and user set to a value higher than 3, use right-click > Reset to set it back to 3 and test how that works for you (test on a normal web page, not the about:config page)
* To reduce the number of lines below 3, double-click to edit and type a smaller number and then you can test that (test on a normal web page and not the about:config page)
Does that help at all?
''Note: I assume you are not using "Caret Browsing" which moves the cursor through the text of the document when you press the up and down arrow keys. The results can be somewhat unpredictable depending on the layout of the page. If you want to test that feature, you can turn it on and off by pressing the F7 function key.''

How can I set up notification traffic to work iPhone five iOS 7.1

How can I set up notification traffic to work iPhone five iOS 7.1

You need the first Internet connection in order to share another connection with the other devices. If you use the Mac and Internet Sharing, then the connection is only going to be as fast as that connection and maybe a little slower since you are all sharing that connection.
You can't make a silk purse out of a sow's ear as the saying goes, you cannot speed up the connection by any magical means.
You should be able to use the personal hotspot feature on the phone if the carriers there support it.
http://support.apple.com/kb/ht4517
You might want to look into a MIFI hotspot as well but once again, you would need some sort of plan for it in New Zealand.

I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

How can I set an event to repeat on a week day rather than a numerical day of each month?

How can I set an event to repeat on a week day rather than a numerical day of each month? I see an option at the bottom of the repeat window .... but I cannot use it. Actually, when I try it freezes up my Calendar.
Lorrene Baum Davis

These scrrenshots are from Snow Leopard - I would think that Lion wouldn't be too much different.

How can I use OmniPortlet and Web Clipping Portlet?

How can I use OmniPortlet and Web Clipping Portlet?

You find information on OmniPortlet and Web Clipping in the Portal Developer's Guide.
o Building Portlets with OmniPortlet
o Building Content-Based Portlets with Web Clipping
Peter

How can I set my WebI filters to Null and not Null

Folks,
I have created a report in WebI and now I am to set up some filters as Null and some Not Null.
How can I set my WebI filters to Null and not Null?
Regards,
Bashir Awan

Hi,
As you said you could do it at the report level and also at the universe level.
One more way is to create the filters in the universe levele and add them in thequery filter.
Ex: in the filter you need to write :
Column1 is null and and column 2 is not null etc.
Hope this will help.
If this did't solve your problem then please explain it in detail.
Cheers,
Ravichandra K

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side. E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

How Can I set my speed of clip to 0%?

Similar Messages

Maybe you are looking for