How can I set Parameter ID.

In My Report i have pass challn no , challan year, Document No doc Yr to a standard Tcode J1ifq for challan recancellation.
ex: doc no     docyr       challan no challan yr.
   34234435   2007         21                20007
                                    22                20007
                                     23               20007         to J1IFQ.
I am using set parameter ID as
SET PARAMETER ID 'MBN' FIELD IT_BDC-BELNR.<<<<<document No
SET PARAMETER ID 'MJA' FIELD IT_BDC-GJAHR.<<<<document Year
SET PARAMETER ID 'GJR' FIELD IT_BDC-DOCYR. <<<< challan No
SET PARAMETER ID 'J2F' FIELD IT_BDC-EXNUM<<<< challan year.
but document no and document year will pass to J1iFQ But not challan No and Challan Year.
so How can I solve this problem.
I am Using it_bdc as internal table having above data as in example.
plz any body solve this issue

MIS matching problems...
SET PARAMETER ID 'J2F' FIELD IT_BDC-DOCYR. ><<<< challan No
SET PARAMETER ID 'GJR' FIELD IT_BDC-EXNUM<<<< challan year.
PARAmeter id for challan no is J2F
and for Challan year 'GJR'
cehck it , it will work

Similar Messages

How can I set up a back up hard drive on airport extreme

I have an external harddrive that was plugged into my airport extreme. Apple seemed to eliminate my abilty to back up wirelessly in one of the updates. How can I set this up again? Does anyone know a way around this?
Thanks,

Ah, I remember those links now. I was thinking something along the lines of:
Never consider any computer a data storage device, rather a data creation ,sending, and manipulation device. Anyone who thinks data is safe on any computer, even copied upon multiple partitions is making a mistake.
Never backup your data exclusively upon magnetic hard drives or flash storage, nor consider same since magnetic storage degrades over time even under ideal conditions.
Store important data on multiple servers on multiple continents.
Burn important data onto multiple copies of archival DVDs and store same in cool dark fireproof safes, multiple places.
Don’t burn data onto junk DVD’s purchased from consumer level electronics stores. These are not archival long life DVD’s nor reliable, nor trustworthy. Archival DVD blanks such as Taiyo Yuden, rated for 100+ years are what the pros use, these are made by JVC and are professional grade DVD blanks.
Most people have never heard of archival DVDs, however their cost is only 30% more than junk-level DVD blanks which are only rated for 5-10 years. Also the reject rate on the inferior DVD is around 15%, the cost is almost identical between the WORST DVD blanks and the BEST DVD blanks.
Most importantly know that 2 copies of your data is 1, and 1 is none, and 1000 copies stored in one place or building, is also the same as none due to possible fire.
Always consider and expect your computer’s hard drive to completely crash anytime, at all times, and you should keep a cloned and updated hard drive handy at all times to return to immediate productivity and utterly avoid programs and parameter reinstallation. Nothing is quicker than taking out a dead HD and tossing in a new updated cloned HD for getting back to 100% in under 20 mins!
Decentralized Omnipresent Data (D.O.D.)
(something I coined an age ago)
Backing up data to:
Multiple HD in multiple locations
On multiple servers on multiple continents, private and public websites, anonymous data farms. (very easy actually)
Burned onto archival optical and magnetic storage
Have unclassified data possessed by multiple people in multiples places.
When your data becomes both everywhere and nowhere, accessible to all, destructible by none, cannot be collected together or permanently retrieved under any circumstances, you have Decentralized Omnipresent Data (D.O.D.) protection rivaling that of large governments.

How can i set a Title to Parameters(Selection-Screen)?

Hi,
i have a Selection-Screen with two Parameters. Both Parameters should be have an Title.
But how can I set a Title two this Parameters? Is there existing any options????
For example, the Parameters "I_WRBTR" and "I_NBDOCS" needs two Title´s.
Every Parameter must have a title, but how can I realize this???
*I have know only a title for "IWRBTR" but i need also a title for "I_NBDOCS"*_.
DATA: FIELD_BUKRS(10).
SELECTION-SCREEN BEGIN OF SCREEN 0100.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
     SELECT-OPTIONS SEL_BUKR FOR FIELD_BUKRS OBLIGATORY.
     SELECTION-SCREEN BEGIN OF LINE, COMMENT (25) text-005 FOR FIELD IWRBTR_, POSITION 33.
         PARAMETERS: I_WRBTR(10),
                                  I_NBDOCS(3).
     SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN END OF SCREEN 0100.
Thanks for Helps.
ETN

Hi,
try this short example:
DATA: FIELD_BUKRS(10).
SELECTION-SCREEN BEGIN OF BLOCK BLOCK WITH FRAME TITLE T_BLOCK.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK1 WITH FRAME TITLE T_BLOCK1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (29) T_SEL_BU.
SELECT-OPTIONS SEL_BUKR FOR FIELD_BUKRS OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BLOCK1.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK2 WITH FRAME TITLE T_BLOCK2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (32) T_WRBTR.
PARAMETERS: I_WRBTR(10).
SELECTION-SCREEN COMMENT 50(15) T_NBDOCS.
PARAMETERS: I_NBDOCS(3).
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BLOCK2.
SELECTION-SCREEN END OF BLOCK BLOCK.
INITIALIZATION.
T_BLOCK = 'parameter'.
T_BLOCK1 = '1. parameter'.
T_BLOCK2 = '2. parameter'.
T_SEL_BU = 'Buchungskreis'.
T_WRBTR = 'Parameter wrbtr'.
T_NBDOCS = 'Parameter nbdocs'.
Regards, Dieter

How can I set VM parameters except Xms and Xmx?

I can set the Xms and Xmx as the following:
<j2se version="1.4+" initial-heap-size="80m" max-heap-size="80m"/>
but how can I set other VM parameter such as Xmn,XX:SurvivorRatio,and some which to special JVM(for example:JRockit)?

There is a whole list ov vm-args considered "safe" by java web start listed in the developers guide at:
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/syntax.html#resources
these can be set with the new arg to the j2se element, vm-args like this:
<j2se version="1.5.0+" java-vm-args="-esa -Xnoclassgc"/>
/Andy

How can i set user's date format?

problem:
I have two users daniel and william.
daniel login the EBS and the date format is :yyyy/mm/dd
william login the EBS and the date format is : DD-MON-RRRR
How can i set date format for everyone?
Thanks.
Daniel.
2006.11.16

Check the system profile ICX: Date Format Mask. Is it set at the application level? Does each user have different date format?
How do you access the application? Through ICXINDEX page or through dev60cgi/f60cgi?
Please note that changing the above profile option will not affect users logging through dev60cgi/f60cgi, in case you need to change it for the users who are accessing the application this way you can use the FORMS60_USER_DATE_FORMAT parameter in the url

How can I set PCTUSED and PCTFREE in Warehouse databases?

Hi,
There are many Schemas in our database and some are used for OLTP and some others are used for Warehouse. Also our tablespaces are Local Managed.
Could you help me please how can I set PCTUSED and PCTFREE for Warehouses and OLTP.
What are your suggestions? What should be optimum?
DB version is 9.2.0.8.
thanks & regards

If you are using locally managed tablespaces with ASSM then the pctused parameter would no longer apply. In all cases dictionary vs locally managed with or without ASSM you should set pctfree based on how much of the data row column values are present at initial row insertion and how likely any column is upated to a larger size after initial row insertion.
In a warehouse I would expect most of the tables to have 100% of the row data present at initial insert and for the data to never be updated. For tables meeting this requirement a pctfree of 3 - 5% would likely be a good choice. I never like to use 0% since the day may come when you add another column to the table.
With OLTP tables the ideal pctfree value varies more from table to table. Most table so seem to work well enought with the default 10% but I have seen tables that need 50% pctfree to prevent row migration since only the key column values existed at initial insert and most all the other column data was added later.
Where ASSM is not in use I like to set pctused to 95 - pctfree. Over the last 15 years I am not sure I ever found a need to change the pctused from this once set. I have set a lot of tables up over the years from the old default of 40% to use 60% and 80% before resetting everything during a server platform migration as I mentioned above.
HTH -- Mark D Powell --

I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

How can I set an event to repeat on a week day rather than a numerical day of each month?

How can I set an event to repeat on a week day rather than a numerical day of each month? I see an option at the bottom of the repeat window .... but I cannot use it. Actually, when I try it freezes up my Calendar.
Lorrene Baum Davis

These scrrenshots are from Snow Leopard - I would think that Lion wouldn't be too much different.

How can I set my WebI filters to Null and not Null

Folks,
I have created a report in WebI and now I am to set up some filters as Null and some Not Null.
How can I set my WebI filters to Null and not Null?
Regards,
Bashir Awan

Hi,
As you said you could do it at the report level and also at the universe level.
One more way is to create the filters in the universe levele and add them in thequery filter.
Ex: in the filter you need to write :
Column1 is null and and column 2 is not null etc.
Hope this will help.
If this did't solve your problem then please explain it in detail.
Cheers,
Ravichandra K

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side. E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

I have an iPad with IMAP email accounts set up but I can find no "inbox, drafts, trash" folders anywhere, either on my ipad or desktop Mac. How can I set them up? They do not show on my MacMail preferences either and I can find no way to add them.

I have an iPad with IMAP email accounts set up but can find no "inbox, drafts, trash" folders for each email account anywhere on my iPad or in Mac Mail. How can I set them up? I can't find anyway to set them up anywhere. Thanks

Hello blu monkey,
I found some resources that I think might help with the visibility of your IMAP email folders on your iPad and Mac.
On your iPad, you may need to follow the steps in this article to make sure your folders are visible:
iOS: If IMAP Mail folders are not visible
http://support.apple.com/kb/HT1393
On your Mac, I am not sure if you have the sidebar enabled, but you can enable it using the steps in the article below. When this is showing, you should see your email account listed near the bottom with a triangle next to it. When the triangle is pointing down, it should show your folders:
Mail (Mountain Lion): Show or hide the sidebar
http://support.apple.com/kb/PH11763
Thank you for using Apple Support Communities.
Best,
Sheila M.

How can I set BPEL server enviorment and create BPEL domain?

Without use the http console, how can I set BPEL server enviorment and create BPEL domain?
When I try to use API like below
import com.oracle.bpel.client.Server;
Server s = new Server(ServerAuthFactory.authenticate("oracle","localhost"));
But I always got four exceptions and one warning like below:
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\ejb.properties (The system cannot find the path specified)
Warning: unable to read transaction.interoperability config property
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.lang.Exception: Failed to create "ejb/collaxa/system/ServerBean" bean; exception reported is: "javax.naming.CommunicationException: Can't find SerialContextProvider
Is it right to use com.oracle.bpel.client.Server like this, please help me.
Best regards,
Vita

Anyone can help me? Because I need deploy BPEL process on production server, so I need the Java funtion to create domain. Thank you very much if you can tell me the correct method of using com.oracle.bpel.client.Server API.

I would like to know how can I set songs in iTunes to play at different times automatically during the day. i.e. one song at 10am the other at 10:30am etc..

I would like to know how can I set songs in iTunes to play at different times automatically during the day. i.e. one song at 10am the other at 10:30am etc..

My daughter and i share same itunes account but we want to separate and have our own. if i change "our" account to "her" account how can i set up a new "for me only" account and retrieve all my contacts and apps

my daughter and i share the same i tunes account but want to have our own now. how can i set up a new account just for me and still move or transfer my existing apps, contacts etc?

Yes, with the credentials of the account that the media/content was purchased with.
Content is permanently tied to the account it is purchased with and cannot be merged, moved, or transferred to another account.

How can I set Parameter ID.

Similar Messages

Maybe you are looking for