How can I set the United States as my country when opening PSE 10?

How can I set the United States as my country when opening PSE 10 so I don't have to scroll down every time?

Why do you have to scroll down every time? You should only see the country window the very first time you launch PSE after installing it.

Similar Messages

How can I set the OS to show list view when I open a file in an application.

So I know you can chose view options in Finder to always show files in list view there. But how do you set the OS to do the same when opening files in an application.

Okay, cheers, so I guess it's stored in the application prefs. I just installed Snow L last week and it bothered me that everytime I opened a document I had to set my pref again. I wasn't aware that it was storing it for that particular app though cause I'm using so many differnt apps. But you are right, it does store for the individual app. Cheers for the answer!

How can I set the initial state of the PGCTR0 out pin?

Hi,
I have a 6115 board, and I am trying to generate a pulse train on PGCTR0 with an external clock. The external clock signal is connected to PFI1 and the PGCTR0 is gated through PFI0. The PGCTR is reset at the end of each run.
The problem is that the initial state of the PGCTR out pin changes from run to run, but I'd like it to stay high after reset. Any help is appreciated. THanks.
feng

Hi Feng,
The default output state of your counters should be high depending on your board. If you run a counter application, and the line ends in a low state it will stay low. One way to change the output state is to not only reset the counter but reset the board (see knowledge base linked below). The other way is to treat it like a digital line (see second link below). This is probably the best method. This method should allow you to read the value and change it using a couple software calls. Instead of disabling the counter, I would reset the counter since you just want to reset the state. This method is also a decent workaround because you are resetting the counter anyway. Hope that helps. Have a good day.
Default State of Counter Output Lines
on E Series Data Acquisition Devices
http://digital.ni.com/public.nsf/websearch/008995633E33E47486256B5F00034436?OpenDocument
Using the General Purpose Counter (GPCTR) on the Data Acquisition (DAQ) Device as a Digital Line http://digital.ni.com/public.nsf/websearch/B8A49A4E33F38AB686256B610061DC6D?OpenDocument
Ron

How can I set the order of search engines on my Macbook?

When I use "Manage Search Engines" to rearrange the order of my search engines, the order changes temporarily, only to revert to the order the search engine add-ons were installed, the next time Firefox is restarted. How can I set the hierarchy of search engines to suit my preference, and have it stay that way?

It may be your preferences problem.
Try to Reset your firefox and try it newly
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How can I set the page that will open, when I open a new tab, to be the same as the homepage?

How can I set the page that will open, when I open a new tab, to be the same as the homepage?
An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
thank you,
Asaf Privman.

You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

Formatting issues: when I open a msg, the font is sooo small you need a magnifier to read it. How can I set the font size to one I can easily read?

== Issue
==
I have another kind of problem with Firefox
== Description
==
I have various formatting issues:
a. When I open a msg from my web browser (Cablevision), the font is sooo small I need a magnifier to read it. How can I set the font to a size I can easily read?
b. When I forward msgs, the text gets all distorted and I need to clean it up (some symbols, lots of spaces between words). How can this be fixed?
c. When I want to tell someone about a website, I cannot type the URL in so that all they have to do is click on it. How can this be fixed?
d. When I open messages, the text opens in a small window and covers the "Show Images" button. Why?
== This happened
==
Every time Firefox opened
== Ever since I started using Firefox (a few months ago)
==
'''Troubleshooting information'''
I didn't find any results
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-nphpclipbook
*Office Plugin for Netscape Navigator
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The Hulu Desktop Plugin allows Hulu.com to integrate with the Hulu Desktop application.
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*3.0.40624.0
*NPWLPG
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
Check the tooltip of each button by hovering with the mouse over each button.
Make Link - https://addons.mozilla.org/firefox/addon/142

How can I set the language when sending an e-mail with attachment - 'Html'?

"Character Broken"
I made an ALV program, and this convert to "HTML', and send an e-mail with this.
Used Process is:
DATA: gt_abaplist LIKE TABLE OF abaplist,
      gt_html LIKE TABLE OF w3html,
      doc_chng LIKE sodocchgi1,
      objpack LIKE TABLE OF sopcklsti1 WITH HEADER LINE,
      objhead LIKE TABLE OF solisti1 WITH HEADER LINE,
      mail LIKE TABLE OF solisti1 WITH HEADER LINE,
      reclist LIKE TABLE OF somlreci1 WITH HEADER LINE,
      lv_line TYPE i.
DELETE FROM MEMORY ID '%_LIST'.
SUBMIT z_template
   AND RETURN EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = gt_abaplist
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
TABLES
    html       = gt_html
    listobject = gt_abaplist.
doc_chng-obj_name   = 'URGENT'.
doc_chng-sensitivty = 'O'.
doc_chng-obj_descr = ' '.
doc_chng-obj_langu = '3'.
objhead-line        = ' '.
APPEND objhead.
mail[] = gt_html[].
DESCRIBE TABLE mail LINES lv_line.
CLEAR: objpack.
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = lv_line.
objpack-doc_type   = 'htm'.
objpack-obj_descr = ' '.
objpack-doc_size   = lv_line * 255.
objpack-obj_langu = '3'.
APPEND objpack.
CLEAR: reclist.
reclist-receiver = 'e-mail address'.
reclist-rec_type = 'U'.
APPEND reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data              = doc_chng
    put_in_outbox              = 'X'
    commit_work                = 'X'
TABLES
    packing_list               = objpack
    object_header              = objhead
    contents_bin               = mail
    receivers                  = reclist
EXCEPTIONS
    too_many_receivers         = 1
    document_not_sent          = 2
    document_type_not_exist    = 3
    operation_no_authorization = 4
    parameter_error            = 5
    x_error                    = 6
    enqueue_error              = 7
    OTHERS                     = 8.
SUBMIT rsconn01 AND RETURN.
I want to show this by "Japanese".
But the character is broken.
LIke This:
u01D1u072C          u0205|            u0205u072C          u0508           QC u04B90m
How can I set the language? How can I solve "Charancter Broken" ?
Plesse, let me know.
Thank you so much.
Edited by: Jaime White 999 on Nov 21, 2011 8:45 AM
Edited by: Jaime White 999 on Nov 21, 2011 8:46 AM

Hi Jaime,
Are you saying, you are getting junk characters in the email attachment? Then pls check the following. Since you want to send Japanese fonts, please pass language 'J' in both objpack-obj_langu = '3' & doc_chng-obj_langu = '3' instead of '3' please replace it with 'J'.
Another thing which you may have to check is the SCOT device type. As I understand from my basis colleague, this may also affect your attachment fonts since the emails are sent through SCOT. Go to transaction SCOT-> Settings-> Device types for format conversion. Check whether wrong device type is defined for Japanese there. Hope this helps
Regards,
Gokul

How can I set the data binding between Web Dynpro & Database table

Dear friend,
I am a beginner of Web Dynpro. I want to develop my simple project like these:
1. Create my own database table via Dictionary Project such as TAB_USER and have 3 fields: USER_ID, USER_NAME, USER_POSITION and I have already deployed & archived it.
2. Create my own Web Dynpro Project, and create the input fields as User ID, User name, User position and icon 'Save' on the selection screen and I have deployed it already.
For the process, I want to input data at the screen and save the data in the table, please give me the guide line like these:
1. How can I set the data binding between Web Dynpro and Database table ?
2. Are there any nescessary steps that I will concern for this case?
Sorry if my question is simple, I had try to find solution myself, but it not found
Thanks in advances,
SeMs

Hi,
You can write your own connection class for establishing the connection with DB.
Ex:
public class ConnectionClass {
static Connection con = null;
public static Connection getConnection() {
try{
Context ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("jdbc/TSPAGE");
con = ds.getConnection();
return con;
}catch(Exception e){
return null;
You can place the above class file in src folder and you can use this class in webdynpro.
You can have another UserInfo class for reading and writing the data into the DB .
Regards, Anilkumar
PS : Refer
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/simple java bean generator for database.pdf
Message was edited by: Anilkumar Vippagunta

In EIC, how can we set the SLA of a subcategory to none SLA-related.

Hi Experts,
This is our current setup in EIC...
Category 0501 has an SLA of 8 hours. Subcategory 050101 has to be none SLA relevant. But if we put zero or blank to the SLA Target Value field, it will automatically have a due date defaulted to today. If we will not indicate 050101 on the configuration, it will have the 0501 SLA of 8 hours.
How can we set the 050101 SLA off?
The path: IMG --> Personnel Management --> Employee Interaction Center (EIC) --> Interaction Center Web-Client --> Application Functions --> Activity --> Service Level Agreement (SLA) --> Define SLV Properties
Thanks in advance.

Hi Harish and Jarret.
@Harish, I already tried unchecking the checkbox of the Display field but the problem with this is, it will also apply for the rest of the categories. It should only be for this specific subcategory.
@Jarret, apology, but can you explain to me further about your instruction/advise? I get the feeling that we're on to something with your advise but I didn't quite get it on how to exactly.
1. You should build the SLA from the lowest level up...
-I'm not really sure how, actually.
2. If you have 8 subcats... will put the 8 entries in the table...
-where do I put the 1 subcat? This is because if I don't put that "No SLA" subcat in the table, the due date of that specific subcat will automatically appear todayu2019s date.
Thanks for both of you. I really appreciate your help.

How can I set the insert date to auto update in Pages 5.2.2

how can I set the insert date to auto update in Pages 5.2.2
I am attempting to have the date in header auto update in a Pages file.
I can insert it, but where is the AUTO UPDATE selection
OS10.9.4
thank you

Apple never included the auto-update feature for dates in Pages v5.2.2. You would have to single-click the date, and deliberately update it.
If you have Pages ’09 v4.3 in /Applications/iWork '09, then it will allow you to configure auto-update of the date field. Right-click on the date, set the format, and click the selection for automatically update on open.

How can I set the size of the font so I don't have to change every new word?

How can I set the size of the font so I don't have to change every new word?

In what application?

How can I set the Corporate Logo instead of Oracle Discoverer logo in 10g

Hi,
How can I set the corporate logo/corporate welcom html file instead of oracle discoverer logo in oracle discoverer plus for olap reports version 10.1.2.48.18. while loading the d4o sessions.
Exactly what are all the steps that I need to follow .
Thanks,
Natarajan.U

Hi Lance,
Thanks for the documents. Its really helpful to me.
I am able to change the look and feel of my reports. But I am unable to change the corporate logo.
The steps that I followed.
1.Goto discoverer Plus configruation.
2.Goto Logo change the option button from None to File and Choosed the .jpg file from C:\Logos.
3.Restarted the application server.
4.Open the BI plus reports in IE. But still I am seeing the same Oracle Logo only.
5.But whatever the look and feel like plastic/system/oracle I changed I am able to see the changes.
6.The logo change is not as simple as I thought??. I need to create Jar on this logo and I need to put the jar file in java /j2ee directory???.
Thanks,
Nats

How can I set the size of an image in java?

How can I set the size of an image in java? I have to choose the width and height of image...thanks to everybody...sorry for my english :-)

Hi 43477
Can you provide more details, do you want to setsize to display an image on a screen of when saving image etc?
PS.
There is a good invention called googlegoogle is good, but sometimes it's better to use more specific search, there is a search field avove on this page :)

How can I set the default sign in the mail accounts? thank you

How can I set the default sign in the mail accounts? thank you

From the Mail menu bar, select
Mail ▹ Preferences ▹ Signatures
Drag the signature to each of the desired accounts in the list on the left. If you want it to be the default signature added to all messages sent from that account, select the account, and then select from the Choose Signature menu at the bottom of the dialog.

How can I set the United States as my country when opening PSE 10?

Similar Messages

Maybe you are looking for