How can I set up APN with B2G 2.0 on Geeksphone Revolution with Consumer Cellular (AT&T) in U.S?
Tried multiple settings and worked with Consumer Cellular staff. (Consumer Cellular is an MVNO using AT&T.) I had this working with ZTE Open C (FFOS 1.3) after some experimentation. (I should have written down all of the settings before switching!)
Right now I get a voice connection and Wi-Fi, but no data connection. Network shows as AT&T.
Here are some suggested settings from Consumer Cellular:
Name: Consumer Cellular
APN: ccdata
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server (If Available): http://mmsc.mobile.att.net
MMSC: http://mmsc. mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: PAP
APN Type: default,mms,supl
Bearer (If Available): Unspecified
Another was CC LTE for Identifier
My wife's Android Samsung Galaxy Nexus only has ccdata for APN and IPv4 set for data and roaming protocols. None of the other stuff.
Thanks in advance for any help you can give me!
After loading B2G 1.3 (using adb sideload, lots of fun), then getting an automatic update to B2G 2.0, I went to the Consumer Cellular web page, where I found up-to-date settings that the tech support guy didn't give me the previous night.
For anyone else who might encounter this, here they are for B2G 2.0:
'''Data settings'''
''(Custom settings)''
APN - att.mvno
HTTP proxy host - 66.209.11.32
HTTP proxy port - 80
Authentication, Protocol, and Roaming protocol - Not Defined
all others blank
'''Message settings'''
''(Custom settings)''
APN - att.mvno
MMS proxy - 66.209.11.32
MMS port - 80
MMSC - http://mmsc.cingular.com
Authentication, Protocol, and Roaming protocol - Not Defined
all others blank
Similar Messages
-
I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?
The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
Is your broadband cable or adsl or fibre or ???
If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
Setup the TC in DHCP and NAT mode.. (depending on broadband type).
You must reset the TC to factory to do the setup.. no files are lost at all.
Here is my current recommended setup.. with Yosemite life has become harder than ever.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Here is why Yosemite has fundamental issues.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
How can i set up icloud control panel on a microsoft surface 2 with windows rt 8.1
How can I setup icloud control panel on a microsoft surface 2 with windows rt 8.1.
I apologize for semi-hijacking the topic of this thread from "Multiple iCould IDs with single AppleID. Possible?"
Perhaps my reasoning for doing this was flawed, but here it is. That thread was started back in June when the real details of iCloud were somewhat conjecture. It is now about 14 pages long. There are some recent posts to the thread, but for the life of me I can't tease a solution to my question above out of them. I just may not be reading carefully enough. If so, I apologize.
What I am looking for is more of a STEP BY STEP guide to setting up iOS 5 and OS 10.7.2 for a family in my situation with my needs. I think I do represent a fair segment of users.
If the monitors of this forum think my thread should be tack on to the end of the above mentioned forum...by all means do so.
Honestly, If Steve were alive today I think he would not be happy with this situation faced by Apple customers. Steve always said his guiding mantra for his products was..."It just works." I honestly believe he meant that. But, with regard to this iCould business...for normal pedestrian users like myself, I would have to say, "It just doesn't work." -
How can I set Firefox (in about:config?) to NEVER bother me with update notifications?
Welp, the question says it all. Or almost all of it. I DETEST the latest, MENU-LESS version of Firefox (and it DOESN'T help that, by standing on my head and spitting wooden nails in a particular direction, I CAN actually find everything contained in the old menus), and therefore I force-installed the previous version (28.0), but my problem is that I am still pestered with prompts that urge me to upgrade to version 29.0. I resent THE HELL OUT OF THAT! I resent ANYTHING NANNY-LIKE that is IN MY FACE!
So, I thought that by setting certain app.update parameters, I could be rid of that UPDATE SCOURGE - and in fact, it seems to have worked on my Linux-only desktop - but, alas, no, it is still there, still very much IN MY FACE on my dual-boot (openSUSE & Win7) desktop PC!
What, then, can I do to be rid of those update prompts? (Note that I am hoping that at some point in a not too distant future, Mozilla will offer, for each new version, a WUS and an I'M THE MAN variant, where the latter allows the user to steer the vehicle, as it were... if this never materializes, then at some point (when I deem Firefox 28.0 to be too unstable to use any longer), I will ditch Firefox in favor of an alternative that retains a semblance of the male's hobby-garage look (as oppose to HER slick, everything-hidden, kitchen-cabinet look!).
Thanks!
I am running openSUSE 13.1 in dual-boot iwith Window 7, and it is only on the SUSE interface that I am having the problem (on Win7, earlier versions allow me to tick a 'don't install anything, ever' box via preferences, rather than having to seek a solution in about:config). Right now I am using Firefox 28.0, having force-downgraded from the latest version.The Link I gave you above won't tweak Firefox but rather give you a brief overview on what's new in Firefox 29.
The link below will show you how to customize Firefox 29 to look like previous versions of Firefox before 29.
*https://support.mozilla.org/en-US/kb/how-to-make-new-firefox-look-like-old-firefox
I also mentioned you can toggle some prefs in about:config to disable automatic updating
You can set these prefs in about:config to disable automatic updating:<br>
app.update.auto - false<br>
app.update.enabled - false<br>
app.update.silent - false<br> -
How can I set up an Airport Extreme as a router, in conjunction with my AT&T modem/router?
I am trying to set up an Airport Extreme as my router, and I am currently using an AT&T modem/router combo. I am wondering what would be the easiest way to do this. Any help would be appreciated. Thanks!
Connect an Ethernet cable from one of the LAN <-> ports on the ATT modem/router to the WAN "O" port on the AirPort Extreme. This cable must remain in place permanently.
Open Macintosh HD > Applications > Utilities > AirPort Utility on your Mac
Click on Other WiFi Devices
Click on AirPort Extreme xxxxx
The utility will take a moment to analyze the connection, then a screen similar to this will appear with your AirPort Extreme instead of an AirPort Express
Type in a short simple name that you want to use for the wireless network
Type in a device name for the AirPort Extreme
Enter a password that will be used for both the AirPort Extreme and wireless network
Verify the password
Click Next
The utility will setup everything for you. When the message of Setup Complete appears, click Done and close AirPort Utility.
The AirPort Extreme wireless network is now available. -
Hello, i want to ask how can i set my printer canon mg2200 ? osx 10.9
Hello, i want to ask about setting printer
I use printer Canon Pixma MG2200
How can i set the driver of my printer for my macbook pro with retina display
thank you so muchhttp://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg2220_w_pp_201#DriversAndSoftware
-
How can I change my APN if the phone carrier block the setting in iphone
I am using Iphone 4s IOS 7
Carrier is Optus woolworth plan
The carrier block the tethering function, also they block the APN setting in iphone.
I am wondering how can I change the APN by myfelf?
THanks!So, you come to an Apple owned/run forum to ask how to skirt carrier restrictions.
Good luck with that. -
I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]] -
I have an iPad with IMAP email accounts set up but can find no "inbox, drafts, trash" folders for each email account anywhere on my iPad or in Mac Mail. How can I set them up? I can't find anyway to set them up anywhere. Thanks
Hello blu monkey,
I found some resources that I think might help with the visibility of your IMAP email folders on your iPad and Mac.
On your iPad, you may need to follow the steps in this article to make sure your folders are visible:
iOS: If IMAP Mail folders are not visible
http://support.apple.com/kb/HT1393
On your Mac, I am not sure if you have the sidebar enabled, but you can enable it using the steps in the article below. When this is showing, you should see your email account listed near the bottom with a triangle next to it. When the triangle is pointing down, it should show your folders:
Mail (Mountain Lion): Show or hide the sidebar
http://support.apple.com/kb/PH11763
Thank you for using Apple Support Communities.
Best,
Sheila M. -
How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.
Phone A = phone with information you want duplicated
Phone B = phone that you want to copy from A
Backup Phone A.
Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup. -
i was using same id on 2 iphones with no problems suddenly everything got mess, how can i set a new id w.out losing my contacts?
I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps -
With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.
From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked. -
How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.
The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network. -
How can i set up mac mail so each line starts with a capital letter?
how can i set up mac mail so each line starts with a capital letter?
I am pretty sure that this is not an option within Apple Mail.
-
How can I set my Mac to only share SPECIFIC folders with Win7
It used to work, but, even though I have set only my Public folder and a specific photographs folder to share with a Win7 PC on my home network, the Win7 machine can see the entire Mac HD.
I followed instructions from here:
http://www.trickyways.com/2011/07/file-sharing-mac-os-x-lion-and-pc-windows-7/
But if I type Run then enter the ip address of the Mac, all the folders appear. Is there a way to limit them to only the two specific folders?
I've mapped the single folder to a drive, so admittedly, unless you go into "Run", you can't see the other Mac folders and drives, but I'd still like to make sure it can't be done.
ThanksWelcome to the Apple Community.
Cricket66 wrote:
........ How can I set photo stream to only upload specific images?
That's not possible unfortunately.
Maybe you are looking for
-
hi friends, execute any one of the query below in plsql. Querys > select count(*) from [email protected] where title = &arg; select count(*) from [email protected] where title = &arg; select count(*) from [email protected] where title = &arg; select
-
HT1338 can not get my pages to open a file?
I can't open my pages and its saying you need to update to read the file? why has it locked its self?
-
I restart my macbook air and now i dont have iPhoto wat do i do?
i restart my macbook air and now i dont have iPhoto wat do i do? and all my music too
-
HT201263 IPHONE 4S NOT WORKING!!
This morning i was listening to music on my iphone 4s, it suddenly stopped and the phone went black and now wont turn on and i have tried ABSOULTELY everything. PLEASE HELP!!!! thanks
-
How do I re-format an Apple document that is already written?
I have written a novel that I would like to submit to a particular publisher. However, the publisher requires I have my name and the title of the novel in the top left hand corner of every page. Is it possible to make a new template & then cut & past