How can I set up Gmail on my iPhone with a different domain name?

I'm an ASU student so my email ends in @asu.edu. However its a Gmail account and I just got a new iPhone and I would really like to set it up through the mail app but it won't let me. Every time I type my email and password in the phone says: "The user name or password for "imap.gmail.com" is incorrect"...but I know it isn't. Is there a way I can do this?
Thanks!

This should work; one of my e-mail accounts is my own domain through Gmail.  Make sure your username is set to your full e-mail address (like [email protected]) rather than just your username.
Did you set it up on your iPhone as an IMAP account, or as a Gmail account?  It should work perfectly using the Gmail setting.  It can work as IMAP, but you need to jump through a few hoops to get there.

Similar Messages

  • How can I make iMessage work on 2 iPhones with 2 different phone numbers using the same Apple ID?

    My work requires me to split time between two countries (Ph and Bn). I had an iPhone 4 with a Ph number and a Nokia for the Bn number. iMessage was running on the iPhone 4 with the Ph number and my apple ID. I recently replaced the Nokia with an iPhone 5 which I set up using the iCloud back up of my iPhone 4. I cant seem to set up iMessage (and Facetime) the way I want it to work on the iPhone 5. Im not sure if iOS 6 would allow me to do this so I'm throwing this out to the forums to check if its possible.
    iPhone 4 w/ iOS 6
    - uses Ph sim card
    - Ph number set in Phone>My Number
    - iMessage>Send & Receive has the following data
    Ph Number - greyed outand checked
    Apple User ID - checked
    iPhone 5 w/ iOS 6
    - uses Bn sim card
    - Bn number set in Phone>My Number
    - iMessage>Send & Receive has the following data
    Ph number greyed out and not checked
    Same Ph number checked
    Apple User ID checked
    Ive tried turning on/off my iPhone 5 and logging on and off iMessage but I cant seem to get it to update the iMessage phone number to the Bn number. Any idea how I can do this?

    I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
    Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Manage your Apple ID and see if that does the trick
    Hope that helps

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • Hard drive crashed, how do I set up itunes sync from iphone with new computer?

    hard drive crashed, how do I set up itunes sync from iphone with new computer?

    hard drive crashed, how do I set up itunes sync from iphone with new computer?

  • Can i lock an app on my iPhone with a different password than the one i use to lock my phone?

    can i lock an app on my iPhone with a different password than the one i use to lock my phone?

    This should work; one of my e-mail accounts is my own domain through Gmail.  Make sure your username is set to your full e-mail address (like [email protected]) rather than just your username.
    Did you set it up on your iPhone as an IMAP account, or as a Gmail account?  It should work perfectly using the Gmail setting.  It can work as IMAP, but you need to jump through a few hoops to get there.

  • How can I set up voicmail on my iphone 5?

    I just got the iphone 5 yesterday but everytime I go to the phone icon and press voicemail it dials the voicmail number and says to input my mail box number.  I enter my phone number but it says there is no mail box for that number.  How can I set up my voicmail?

    Is it a paid account or a free account?
    The free accounts can not be set up on the iPhone because the free Hotmail accounts do not user one of the two email server standards, POP3 or IMAP (it uses a proprietary HTTP protocol) which the iPhone requires.
    You will need to upgrade to one of the paid hotmail accounts before you can get POP3 access for your email.

  • How can I set up hotmail on my iphone? i need some advice please..

    i can't set up hotmail on my iphone.. please can someone tell me how to do that. thankyou..

    Is it a paid account or a free account?
    The free accounts can not be set up on the iPhone because the free Hotmail accounts do not user one of the two email server standards, POP3 or IMAP (it uses a proprietary HTTP protocol) which the iPhone requires.
    You will need to upgrade to one of the paid hotmail accounts before you can get POP3 access for your email.

  • New iMac 21.5". How can I set up a new user account with access to all the files of the original user account?

    Running Mavericks on a 2013 iMac 21.5". I want to set up a second user account with different settings that meet the requirements of specific software. I need the files to be accessible by both users. I have made both the main and secondary accounts administrators. I have also enabled file sharing for both. Neither account can see the other's files in Finder.
    How can I make all files accessible to both accounts? I read that administrator accounts automatically can see all files on the computer, but it is not working out that way. I have restarted the computer, to no avail.

    Comcast only offers POP accounts, and one way to set up the account and enter all the settings before it connects to the mail server, might be to do it Offline:
    https://support.mozilla.org/en-US/questions/991539#answer-547878
    The server settings are given [http://customer.comcast.com/help-and-support/internet/setting-up-thunderbird/ here], but the method is for Online account setup.

  • HT2589 How can I set up an apple I'd with no credit card on an ipad mini?

    I have set up an apple I'd but I can't put any free apps on my ipad mini as it won't let me choose the none option when I get to card details as I don't have a credit card and can't use a bank card. How can I do it without a card plz can someone help me feel like I'm going round in circles.

    There are instructions on this page for creating a new account (it won't work with existing accounts) without giving a credit card number : http://support.apple.com/kb/HT2534 e.g. select a free app in the store and click on 'create Apple id' when buying it - if you are doing it on your iPad then you will need to log out of your account first by tapping on it in Settings > iTunes & App Stores, otherwise that account will be used

  • How can I set the SRQ bit on GPIB with LabView ?

    Hello,
    I am developping an application with LabView RT on a PXI RT system. This application acts as an instrument (non controller GPIB), and I need to assert the SRQ line. How can I do that ?
    I know the ibrsv function, but I can't find it in LabView, and I can not use it through a DLL call since GPIB DLLs are not compatible with Real-Time.
    Thank you.

    Hello Alfonso,
    It sounds like you might be getting errors -200279 and -200278.  (In the future, if you post the actual error codes, it helps us to know exactly what is happening).  Error -200279 happens when you are performing a hardware-timed acquisition (meaning the data is sampled according to a clock signal on your board), but your LabVIEW program is not reading the values from the buffer allocated for that task in computer memory fast enough.  Basically it's a buffer overflow error.  It means older samples have been overwritten before you attempted to read them out.  As the error message suggests, "increasing the buffer size, reading the data more frequently, or specifying a fixed number of samples to read instead of reading all available samples might correct the problem."  For more information on this error, please see the KB (DAQmx) Error -200279 During a Continuous, Buffered Acquisition.
    Error -200278 happens most often when you have configured a finite acquisition, but are calling the DAQmx Read function in a loop.  If you want to perform a finite acquisition, you should only call DAQmx Read once.  For more information on this error, see the KB Error -200278 at DAQmx Read.
    Finally, please refer to Abhinav's earlier post about the sample rate on the 9237 module.  As he described, the NI-DAQmx 8.3 driver will only allow you to set the sample clock to integer divisions of 50k (50,000/n, where n can be 1, 2, 3...13).  Since the maximum divisor is 13, the smallest sample rate that can be used is 3.846 kS/s.  You can check what value the driver is actually using for the sample clock by reading from the SampClk.Rate property of the DAQmx Timing property node.
    I hope this helps!  Let me know if you have any questions about what I've described.
    Best regards,

  • How can i set up a new imap folder on my own domain

    I have my own personal domain on my own server and I am wondering if the only way to set up a new folder is via cPanel direct on my server - or can it be done through Mail?

    If I can not set up a second Contacts folder, does anybody have an alternative way of having contact information that a person could see the information from an Outlook Format available for viewing?

  • How can i set a song from my iphone library as my ringtone?

    CAN I SET A SONG FROM MY LIBRARY AS MY RINGTONE FROM MY PHONE?

    boooo!!!!  so when i purchase the ringtone, i have to transfer it from my pc?  i just switched from android and im having a hard time figuring some things out.

  • How can I set up email in my iphone 4?

    I tried so many times to set up, I start to do it, settings, mail..., add account, I chose outlook I add my email and password, verified but that's it, It doesn't show me for IMAP or POP... to add my info.. What should I do?   It doesn't works....     I did it with gmail and works perfectly, immediately.

        Hello Agdade,
    I'd love to provide insight into your inquiry. I appreciate all that you've done thus far. Let's ensure we get this e-mail set up.
    I found a very helpful link from our friends at Microsoft that will help you set up the outlook e-mail. The key when setting up a POP3 or IMAP with outlook is choosing "other" as an option.http://bit.ly/UAUkfm
    YosefT_VZW
    Follow us on Twitter @VZWSupport

  • How can I set up a List of Figures with extra text?

    I'm writing my Art History dissertation, which includes a substantial group of figures at the end.  My advisor has requested that I caption the images, but also provide a List of Figures before the actual images begin.  I've got it figured out this far--I'm using the Table of Contents feature to automatically number the captions and then pull the caption text back to the List of Figures. 
    Here's the snag:  I need to include attribution information about where I found the images I'm using, but only in the list of figures.  My advisor specifically requested that I not include this information in the captions as he felt it cluttered the images.  How can I include small amounts of text (for example "After Jones 1987, Fig. 22") for hundreds of images in the List of Figures without putting this info in the captions themselves? 
    Of course, just typing the info into the List of Figures doesn't work--as soon as the list is updated the extra text gets erased.  I've been playing around with hidden layers, but when I create a new hidden layer with text frames the numbering of the original layer is disturbed.  Any ideas about how to preserve the numbering and include the extra information in the List of Figures without adding it to the visible caption? I'd be very grateful for any help.

    Perhaps at the end of your caption, in a [None] coloured text, 0.1 pt size? Don't put it into a separate paragraph, 'cause you'd need to pick this up as well for your TOC. To edit this invisibly small text, you can use the Story Editor.
    (And I got quite far suggesting making it Conditional Text, which you would normally hide, having it show only when you generated the List of Figures, before a few dormant neurons woke up and demanded attention.
    'Course it would work -- you would get the extra text in your list, and if you hide the conditional text again, your document would reverse to "normal" state. However, making the conditional text visible may cause your text to reflow, and thus your regular Contents would be okay but the List of Figures -- generated with more text in your document! -- could well be off by a few pages ...)

  • How can I use same account in 2 iphone with diff contact list?

    how can I use same account number but other all totally diff such as contact list, application, everything ..... I found that it's bad on IOS5.
    when I used IOS4 .. old verison, I can keep my phone in diff data. Afte upgrade IOS 5, it's bad. Even take photo, it can not focus zoom in and out.

    how can I use same account number but other all totally diff such as contact list, application, everything ..... I found that it's bad on IOS5.
    when I used IOS4 .. old verison, I can keep my phone in diff data. Afte upgrade IOS 5, it's bad. Even take photo, it can not focus zoom in and out.

Maybe you are looking for