How can I set up MRP to use QI Stock at the Vendor, for Planned Ind Reqmts

Hi experts,
We are running ECC 6.0.
In one of our plants, we have a lot of components that are available as QI stock in Material Provided to Vendor status.
We build SKUs (MRP type M3) at the top level in the BOM, and the SKUs use the above components. We mostly enter demand at the SKU level in the plant (LSF).
We have set up the source list for all the SKUs in this plant with MRP = 1.
When MRP runs for the components (MRP type PD), system is able to first allocate the QI stock to any of the requirements that are driven by the higher level SKUs. Only then, it creates Planned Orders for the components to account for the shortage.
Issue : We now enter forecast (LSF) directly at the Component level (for some Materials). Now, even though we have excess
component stock to handle all the demand (dependant demand driven from the SKUs + LSF at the Component level), system doesn't allocate the excess QI stock to the LSF demand at the component level. It just creates Planned orders.
Strategy Group for both the SKU and Component is 10. We don't have MRP Areas implemented.
I tried setting up the source list at the Component level using the vendor but there is no use.
Does any one have an idea on how this can be addressed?We want to be able to use up the QI stock first before we create Planned orders.
Thanks,
Rao

How can you create QI stock first before your planed order from MRP run? Do you know this is not standard SAP ?

Similar Messages

How can i set a song from my music library to a ringtone for my iphone 4s

how can i set a song from my music library to a ringtone for my iphone 4s?

The procedure is the following:-
*right click the song on itunes and click get info.
*under the option, check in the start time and end time- This is the exactly which part of the song you want to make your ringtone.
*Click Ok.
* Again right click in the same song and click the CREATE AAC VERSION
* Now you can see the same two song. if you have made the short length in step 2, lenght will be different.and this will be in (.m4a) format. and if you dont see on itunes you can search the name on finder. you will find both files.
* Now you try to change the format (.m4a) to (.m4r), you just delete a and add r and press enter bottom. and conform it.
*Now you add this files to the ringtone/tones on itunes which is located on the left side bar of itunes.
*make sure under the preference of your itunes under the general the tones section is checked in.
*go to your device on itunes. Under the tones check in sync tones. You can Sync all tones or the particular tones which you want.
*Now this tone is on your iphone. You can change your ringtone through setting>sound>ringtone and choose the particular one.

Can we set a rebate on total business done with the vendor

I am able to create Vendor rebate on vendor / material combinbation with condition type A002
can I create a Rebate on total business done with the vendor for lets say 6 month
I tried with Rebate agreement type A001 but its asking a single material number ..
SAP Gurus Plz answer !

Lets say If my vendor Reaches 10000$ 1% rebate
20000$ 2% Rebate

How can i set "Createdby" attribute When using Custom JheadStart Security

Hello
We do not use JASS for Authentication , please help us how can i set createtby attributes with jhs.username in application for any entity object?
thanks

See a similar question at History Attributes when using Custom Authentication Type

How can I set my "attach file" system to always show the date and offer to resort?

When I want to attach a file to an email, or save it for that matter, I have to turn on Details instead of List in the View Menu. How can I set Thunderbird to have Details on as my default.
Thanks!

For use in the BB, the on-device format must be used...no PC contains the necessary file structure that the BB needs to find on the card in order to use it correctly. If you can no longer read the card via the BB nor the PC, then it's quite likely that your data is already destroyed. But, there are several PC utilities that claim to be able to recover Flash Memory devices such as SD cards...you should perhaps check those out (Zero Sum something or other? Can't recall specifically, but google will be your best friend in your quest.)
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I set up airport extreme using my existing 11.g router

My existing router (ZyXEL - supplied by Telefonica with my land line) is an 11.g type and does not allow me to use iPad/iPod in certain areas of my home. Yesterday I bought an Airport Extreme and was told that I could either connect my existing router's ADSL line directly into the Extreme and connect to my Mac and other peripherals using USB or ethernet cable, or connect from the existing router.
I tried each method using Airport Utility in each case and also trying the different options offered in the set-up. It doesn't seem to want to work.
Can anyone help me please.

Further to my earlier (and first) posting, I have been playing with the airport extreme and it now works via my existing router but, it's range is less than 15 metres and that is no better than my existing 11.g router.
Does anyone know how I can increase this range?
p.s. any help in the simplest terms please.

How can i set picture as background using JPanel

hello can you kindly tell me how i can set picture as the background of my jpanel instead of using set
setBackground(Color.bule)

you can use a JLayeredPane ; put a JPanel containing a JLabel based on an ImageIcon on the lowest layer of your JLayeredPane
then, use upper layers to add components
edit: another possibility is to override the "paint()" method of your JPanel container, and use drawImage() to paint the picture as a background

How can I set "SOAPAction" http header using SAAJ

When I send soap request, http header's like below
SOAPAction: ""
But, I'd like to send like this
SOAPAction: "http://tempuri.org/HelloWorld"
How can I that using SAAJ ?
My code is
String xml = "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n" +
"<soap:Envelope xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" xmlns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\">\n" +
" <soap:Body>\n" +
" <HelloWorld xmlns=\"http://tempuri.org/\" />\n" +
" </soap:Body>\n" +
"</soap:Envelope>";
Document doc = DocumentBuilderFactory.newInstance().newDocumentBuilder().parse(new ByteArrayInputStream(xml.getBytes()));
DOMSource domSource = new DOMSource(doc);
SOAPMessage message = MessageFactory.newInstance().createMessage();
message.setProperty(SOAPMessage.CHARACTER_SET_ENCODING, "utf-8");
message.setProperty(SOAPMessage.WRITE_XML_DECLARATION, "true");
message.getSOAPPart().setContent(domSource);
message.writeTo(System.out);
SOAPConnection connection = SOAPConnectionFactory.newInstance().createConnection();
SOAPMessage response = connection.call(message, helloURL);
connection.close();
SOAPBody body = response.getSOAPBody();
if ( body.hasFault() )
SOAPFault newFault = body.getFault();
System.out.println("SoapBody has fault.");
System.out.println("code=" + newFault.getFaultCodeAsName());
System.out.println("message=" + newFault.getFaultString());
System.out.println("actor=" + newFault.getFaultActor());
else
System.out.println("Call Successed.");
System.out.println(body);
}

message.getMimeHeaders().addHeader("SOAPAction", "http://tempuri.org/HelloWorld");

How can an email account be created using Java mail on the FLY.

Scenario is such that i am using mail server from MDaemon.com and JavaMail api,and making Email website like yahoo...some what ! but how can a user create his account by just filling the form and when he enters his account be created in Mail server..

Last time I checked MDaemon has its own API for account management. I have never tried to do anything with it but their sales literature says it exists.
Account management will be specific to the platform and mail server software. This is beyond the scope of JavaMail which is for message transport (and management to an extent on IMAP servers), not account management on the server.
The other alternative is to write your own application that modifies the structures used by mdaemon but since it already has an API why bother.

How can I set default value to a transient parameter in the VO

I have created a transient parameter in the VO, which is type of boolean.
When I try to input the "true" or "True" or "Y" in the 'default value',
and then running the programm, but all failure.
so I don't know how can i do.
Genuinely waiting for you help, thanks in advance.

Hi Sumury,
First of all you could check if this transient attribute is read only. to check this, edit the VO and select the transient attribute under the Attributes tab. Then verify if it is marked as "Updateable Always" on the right-hand section.
If it is updateable, then try setting the default value on the VO Implementation class: open the xxxVOImpl class, go to the transient attribute's setter (setxxx()) and change it to:
<code> if (getXXX() == null) setAttributeInternal(XXX, "Y");
else setAttributeInternal(XXX, value);</code>
This might work. If it does not, then please post the exact message you are receiving when running the app.
Hope this helps!
Thiago

How can I set Office Communicator to use my Outlook settings

dears
i use the business exchange mail from vodafone egypt
in work i can use outlook to see my mails and also office communicator
but here in home i can only use OWA and outlook and i cannot set the Communicator to use my Outlook settings
i also tried to use the same settings that already set on the work but i cannot login to it
so please help me to open it
sorry about my English not good :)

Looking to do voice overs? See iMovie '11: Record a voiceover

How can I set firefox to stack my tabs one after the other so that I do not have to move through tabs using the buttons at the ends

when I open multiple tabs which do not fit the tab strip I have to move through tabs using scroll buttons. is there any way way I can stack the tabs on each other or suggest me a add-on which can help me achieve this

You can consider to access the tabs via the list all tabs button.
You see the "List All Tabs" button in current Firefox versions if there are that many tabs open that you get the Tab bar scroll buttons appearing.
* Permanent List-all-tabs Button: https://addons.mozilla.org/firefox/addon/permanent-listalltabs/
The Custom Tab Width extension adds CSS rules to adjust the tab width settings as set by the browser.tabs.tabMinWidth and browser.tabs.tabMaxWidth prefs on the <b>about:config</b> page.
* Custom Tab Width: https://addons.mozilla.org/firefox/addon/custom-tab-width/
You can achieve the same with code in userChrome.css.
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#tabbrowser-tabs ~ #alltabs-button { visibility:visible!important; }
.tabbrowser-tab[fadein]:not([pinned]) { min-width: 100px !important; max-width: 250px !important; }
</nowiki></pre>

How can i set page zoom level using css and javascript in firefox.

i have problem to set zoom level in firefox.
document.body.style.zoom = 150%; is worked in IE and Crome but not working in firefox so pls. i want to know a alise property that are provide a same functionality to me.

Currently there is now way of retaining zoom level across pages in Single Page Mode. We have noted down your request and this might get implemented in one of our future releases. Thanks for the feedback.
- Adobe Reader Team

How can I set Firefox to start using a 32-bit kernal? Some Apps are telling me to restart Firefox in 32-bit mode to continue processing on site. How do I initially start Firefox in 32-bit mode and not have to restart and re-acquire connection again.

PC is iMac using Mac OS X ver. 10.6.8, 64-bit Kernal and Extensions = NO
I would prefer to leave this option alone until I upgrade to "Lion"

Your solution worked like a charm............. much appreciated!
\

How can I set up an email user as "send-only" (no mailbox for receiving)?

Can anyone tell me how I can set up an email account that can send emails but not receive emails.
Our Web application has been using a generic email address "[email protected]" in all of our PHP Web applications as the sending email account. I have this user set up in WORKGROUP ADMIN as a proper account. However the account gets tons of SPAM emails and is constantly filling up.
Also, all of the email accounts require SMTP authentication to send emails.
Is there any way to identify an account as a send only account so we can generate emails from our Web applications that cannot be replied to?
Thanks for the help
-- Jon

Doing so will cause issues. If you send out mail which to an outside server appears to be non existent, mail may be rejected and you may even be blacklisted.
You can remove the account from WGM and add a role account as an alias send to /dev/null. This will look to the outside world like an existing address, but simply be discarded on your system. You should however include a working address in your mailings for people to be able to respond.
Assuming you use local domains, edit /etc/postfix/aliases and add:
noreply: /dev/null
(you can change noreply with the sender used in your PHP apps, but I'd probably change the PHP apps to use noreply as this signals to people receiving your mails that this address is unattended).
When done, issue:
sudo postalias /etc/postfix/aliases
sudo newaliases
sudo postfix reload
HTH,
Alex

How can I set up MRP to use QI Stock at the Vendor, for Planned Ind Reqmts

Similar Messages

Maybe you are looking for