How can I setup a dynamic global host name in airport utility 6?

I found the directions for 5.6 but I cannot install on mountain lion.
Thanks -
Donna

There are several things that you can do to work around this issue. None of them will be officially supported by Apple, so you will be on your own if you decide to try this.
If you have been using Time Machine for backups, you can go back a month or two, locate AirPort Utility 5.6 and restore it to the desktop on the Mountain Lion machine.
Then, simply drag and drop it into the Utilities folder inside the Applications folder. It will run fine, and you can keep both AirPort Utility 5.6 and 6.x on your Mac.
Or, if you have another Mac there that is still running Lion or Snow Leopard, you can copy the AirPort Utility 5.6 application and then paste it into the Utilities folder under Applications.
If one of those ways will not work, there is another, but it gets complicated. Post back if you need more info.

Similar Messages

  • Dynamic Global Host Name!!!

    Hello Everybody!
    I have Time Capsule 2TB, and i have an issue about it, which its how to connect to it via internet?
    i know that i must have mobileme account and to be added to advanced in the airport utility.
    then i have to setup the Dynamic Global Host Name, this is my problem?
    how can i get the Dynamic Global host Name?
    Is it from ISP?
    is it supported by some regions? or all over the countries?
    if so, is it supported in Egypt?
    i gave a try and i contact my ISP (Vodafone) but they didnt hear anything or even know anything about the Dynamic Global Host Name. If from ISP, what could i tell them to understand me?
    because when i asked about DGHN, no one understand me.
    Thank you for your help,
    Sincerely,,,

    Abdelaal wrote:
    now the ip address for the Time Capsule is 196.168.0.4
    and the WAN IP address is 10.0.1.1 .
    That sounds backwards. The public IP address 196.168.0.4 is administered out of Mauritius, which should make what you see a WAN address. An IP address 10.0.1.1 is a "private" IP address, which you'd expect to see in a LAN behind a NATting router.
    (Back to My Mac isn't working properly because you may have more than one device on your network providing Network Address Translation (NAT). Try disabling NAT on one of the devices )
    As it says, that means that you are behind multiple layers of routers providing translation of network addresses. Can you tell what WAN address is being assigned to your ADSL modem/router? I'd still try to put that device into "bridge" mode.

  • How can I setup Open Directory so that name resolution can also be achieved using a LDAPv3 server (Linux host)

    I have a Mac OS X Lion machine (macbook) which is used in a network where most machines are running Linux. Hostname resolution for local machines is achieved on the Linux boxes using a LDAP host. How can a similar behavior can be obtained on Lion (I found no /etc/nsswitch.conf).
    I started the Directory Utility, chose the LDAPv3 line, add a line with the IP address of the LDAP server and a "base" but this does not seem to work.
    The opendirectory log file is not very informative. It just says (XX.XX.XX.XX is the LDAP server IP address):
    2011-10-27 16:42:33.040 CEST - Registered subnode with name '/LDAPv3/XX.XX.XX.XX'
    Thanks for any help.
    Thomas

    My advice is to advise everyone of a scheduled down time when it's convinient for you and implement plan B.
    Plan A will simply cause you more grief in the long run.

  • How can i Customize the UIShell Global Area ? Please provide some steps to Customize the UIShell Global Area ? i am using JDev11.1.1.7.0g version

    How can i Customize the UIShell Global Area ? Please provide some steps to Customize the UIShell Global Area ?
    Actually I need to manipulate the Sign Out link and put my own Sign out link there...

    If you want to customize the UI Shell you need to download the code from UI Shell - ADF UI Patterns - Dynamic Tabs UI Shell Template Functional UI Pattern ; modiffy and use the updated code

  • How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?

    How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?
    Have an Exchange mail account setup and accessible in my mail on iPad... however my kids use it and i would like to restrict them from accessing this specific portion of the device.  I tried viewing restriction options and do not see that i can apply a restriction specifically to Mail.  Thanks for your help.

    Not a feature of iOS. Check the AppStore to see if there are other
    mail apps that allow passcode protection.
    Or use Safari to log onto your email via a web-based interface and
    enter your credentials each time. A bit slower, but the kids will
    not know the details to login.

  • If I have two email accounts, one personal hotmail account and one MS Exchange work account, how can I setup individual notifications for each account. Right now, any email from any account has the same notification. I want work to be different than perso

    If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
    Thanks

    Sorry you get only one notification sound for all email accounts.  you can send a suggestion to apple here http://www.apple.com/feedback/

  • I have multiple computers and iPhones and now iTunes will not allow my wife to load applications or use her own iTunes playlists.  How can I setup each device for each user correctly?

    We have multiple computers and iPhone devices which I have passed on to other family members, such as my wife.  Now she is not able to load apps to her devices, eventhough it appear she is logged into her own iTunes account.  How can I setup iTunes correctly on each device?  Currently, there is one PC and one Mac laptop and we each have iPhones, with one other family member not able to use his 'passed-down' device for iTunes, also.

    Hello dal1820
    Check out the article below on how to use multiple devices with one computer. The main idea that I want to point out is to have different users for each person as it is the easy way to make sure that no issue happen when syncing.
    How to use multiple iPhone, iPad, or iPod devices with one computer
    http://support.apple.com/kb/ht1495
    Regards,
    -Norm G.

  • HT1918 how can i setup  my account without a credit card

    how can i setup  my account without a credit card

    Thanks SniperKat but I don't know why for some reason the "NONE" disappeared...
    I started to create an account and when I saw the credit card thing I just clicked back and back and so I closed the browser... every free app or something free I get it appears a window : " You have to review some of your information about your account" .... but I don't have an account yet because I didn't create it.... the only solution is to create a new e-mail account and go to iTunes store and create a new account with the new e-mail and be very carefull with the "Free app" this time...

  • How can I setup my email account ?

    How can I setup my email account on my home page email app?

    GDHump,
    I know the importance of ensuring your email is set up to your preference! Here's a link that provides the steps to view and edit your email account Servicer settings on the Sony Ericson Xperia Play: Email Account Password and Server Settings Xperia Play by Sony Ericsson | Verizon Wireless. Please let us know if you need anything further.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • HT4436 how can i setup one account for me and my kids ?

    how can i setup one account for me and my kids ?

    One account each, or one account for all of you to share?
    Either way, follow the instructions here: http://www.apple.com/icloud/setup/
    Remember, if you share an iCloud account, you won't be able to maintain independent Contact lists, calendars, bookmarks etc. They will all be synced to all devices setup using the same account.

  • How can I do a dynamic include of a page fragment?

    I have a technical support website with a lot of simple html pages. What I want to do is hyperlink from the index page to another page, which would display these html pages as a page fragment, dynamically based on a session bean set by the hyperlink.
    I basically want to do this, if it was possible:
    <jsp:directive.include file="#{SessionBean1.pageToDisplay}"/>
    Now the FAQ's has a topic "How can I do a dynamic include of a page fragment?", which would seem to answer my question.
    But this is all it says, and it makes no sense to me. Could someone please translate? :)
    "Using a page fragment file (but using instead of the usual Creator approach) will accomplish a dynamic include."

    Here is 1 solution:
    First add this to the jsp:root tag:
    xmlns:c="http://java.sun.com/jsp/jstl/core"
    Then surround the page fragment directive with something like this:
                            <div style="position: absolute; left: 24px; top: 408px">
                                <c:if test="${SessionBean1.count > 0}">
                                    <jsp:directive.include file="testPF.jspf"/>
                                </c:if>
                            </div>

  • How can i add a dynamic header value in to the pdf

    I am using a AssemblerService (Invoke DDX) to modify a Pdf file. How can i enter a dynamic value into the header using ddx ?
    DDX used
    <DDX xmlns="http://ns.adobe.com/DDX/1.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://ns.adobe.com/DDX/1.0/ coldfusion_ddx.xsd">
        <PDF result="Out1">       
            <PDF source="Doc2">
                <Header>
                    <Right>
                        <StyledText>
                            <p>"here i need to add a dynamic data from the process"</p>
                        </StyledText>
                    </Right>
                </Header>
            </PDF>
        </PDF>
    </DDX>
    Thank You.

    Insertion Point is a placeholder Object which is used to dynamically replace while assembling. Search through the assmber guide to get any hints.
    Nith

  • Database filled fields to a pdf form, how can i setup fields to receive ?

    have a database that has a pdf form filler that can send filled fields to a form designed pdf, how can i setup fields to receive the specific fields ?

    Hi housesboat,
    Welcome!
    Please try this to get you started: http://forums.adobe.com/docs/DOC-2412
    Let us know if you have other questions.
    Kind regards, Stacy

  • How can I create classes dynamically?

    Guys
    My requirment is I want to create classes and their instancess too dynamically. First is it possible in Java?
    If so, then my next question is how can I refer such dynamically created classes in my code to avoid compilation error.
    Thanks in advance
    Regards
    Sunil

    For other ways to generate classes on runtime you could also have a look at BCEL:
    http://jakarta.apache.org/bcel
    And dynamic proxies:
    http://java.sun.com/j2se/1.4.2/docs/guide/reflection/proxy.html
    If so, then my next question is how can I refer such
    dynamically created classes in my code to avoid compilation
    error.Generally the classes that you load should either implement some interface or extend some abstract class you know of at compile time so that the compiler knows what methods are available for use. If that's not possible you can only use reflection.

  • How can we setup "price before discount" in foreign currency?

    Hi all,
    Hopefully someone can help.How can we setup "price before discount" in foreign currency?   Can someone also please tell me the proper Variable Number (No.) for that?
    Look forward to your reply,

    IHi,
    Thanks for your help..i will give good feedback to you all.
    Just to let you know in pro forma invoices we have got Unit Price in GBP (example: 7.4000 GBP )  but Total line, Total Before Discount, Total (document) are in Euro.We have already changed that to 88->87 and 91->93 so those fields are correct apart Unit Price?
    Any advice please ?

Maybe you are looking for