How can i setup airport express

i need to help to setup airport express

what after that how can i confugure it
Bob Timmons wrote:
OK, thanks.
We know that you have an AirPort Express model A1392
We also know that you have Windows 8.1
We do not know if you have installed AirPort Utility 5.6.1 for Windows - Apple Support. If not, you need to do this.
We still do not know what you want the AirPort Express to do. What service will it perform on your network?

Similar Messages

  • How can i install airport express A 1264 on os x 10.9.2

    How can i install Airport Express A 1264 on os x 10.9.2

    Hello chawich
    All you should need is Airport Utility that is located in the Utilities folder that sits in the Application folder. If you have an iOS device, you can also set it up with that device with Airport Utility or in Wi-Fi section in Settings.
    AirPort Utility software and firmware downloads
    https://support.apple.com/kb/HT1998
    Regards,
    -Norm G.

  • HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

    How can I use Airport Express (1st Generation) with OS X Mavericks?

    1st Generation AirPort Express will work fine with Mavericks.
    Are you sure that you have a 1st Gen Express?
    Check the model number on the side of the Express. 1st Gen is A1264.
    If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
    Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

  • How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?
    Connect the AirPort Express to the Ethernet port in your room.....to be able to create your own private wireless network in your room for multiple devices.
    You will still have to pay the hotel Internet charge for one device, if the hotel charges for Internet access.
    If the hotel only provides wireless service, then a single AirPort Express will not help you.
    However, if you have two AirPort Express devices, then you can use one to "join" the hotel wireless network, then connect the second Express to the first using an Ethernet cable and create your own wireless network for multiple devices in your room.

  • How do I setup airport express to extend my airport extreme

    How do I setup airport express to extend the airport extreme

    Unfortunately, you are getting incorrect advice here. Might be a good idea to start a new post, since the original thread is long out of date.
    First, please confirm that you have a compatible Express with the AirPort Extreme. This would be either the current A1392 version.....or the previous A1264 version.
    Next, we need to confirm "how' you want to extend, since you do not mention this in your post.
    Are you planning to "extend" by connecting the AirPort Express to the AirPort Extreme using a permanent, wired Ethernet connection (highly recommended).....or.....are you trying to "extend" by having the Express try to connect wirelessly to the AirPort Extreme?

  • How can I use airport express in India on my ipad

    I have iPad that I want to use in India with airport express. Please help how to.

    Connect the Airport Express via Ethernet cable to the modem you got from your Internet provider. Assuming your PC is using wired Internet now download the Airport utility. Then follow the quick setup guide that came with the AEX.

  • How can I join Airport Express and 2Wire 3600HGV to extend wifi?

    I to join an Airport Express to the wifi network from my AT&T 2Wire 3600HGV router to extend the wifi signal.  I know it is not SOP to link an AX to a non-Apple device like this.  I found instructions ( http://fsdeviations.blogspot.com/2012/09/howto-2wire-3600hgv-airport-extreme.htm l ) for joining an Airport Extreme to the 3600HGV.  Has anyone used this or a similar approach with the Express to join and extend wifi from the 3600HGV?

    Connect an Ethernet cable from on of the LAN <--> ports on the back of the 2-Wire modem/router to the WAN "O" port on the AirPort Express.
    Power up the AirPort Express for a few minutes. The indicator light on the front of the device will be slowly blinking amber at this time.
    On your Mac......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Other WiFi Devices tab
    Click on AirPort Express
    The setup utility will open up and take a minute to analyze the network, then suggest that the AirPort Express will create a new network....which is the correct setting.  The window will look similar to this illustration:
    For Network Name......type in the exact name of the wireless network that the 2-Wire is providing......IF.....you want to "extend" the 2-Wire network and make one "big" network.  If you want to have the AirPort Express provide a different network, type in the name of the network that you want the AiPort Express to provide.
    For Base Station Name....type in a device name that you want to call the AirPort Express
    Password......If you want to extend the 2-Wire network, then type in the exact same password that the 2-Wire network is using.  If you want the AirPort Express to provide a different network, type in a password that you want to use with the network that the AirPort Express will provide
    Verify......verify the Password
    Click Next, and the utility will set up everything for you automatically.
    When you see the message of Setup Complete, click Done.  That's it. There should be a green light on the front of the AirPort Express at this point.  You can configure other AirPort Express devices in the same manner.

  • How can I use Airport Express to create a standalone Wi-Fi network without Internet Access so I can browse web pages on the local network? I will be using MAMP as my server (Apache)

    I would like to create my own Wi-Fi standalone network at an upcoming tradeshow where there will be NO internet access.
    Currently, I run and develop sites on my iMac use MAMP to manage my sites locally. Using MAMP, I run my sites as though they are on the internet although everything is local.
    I purchased an Airport Express hoping I could create a standalone network so that the iMac would broadcast its website to whatever device connects to it such as my iPhone, iPad and MacBookPro.
    However, after setting up the network successfully (I have a green light on the Airport Express, and there is NO internet going through it), I  am  not able to go any further by logging into the iMac's websites from the other machines. Form my MacBookPro Finder, I can look at files and folders using afp://10.0.1.2, from the Find/Go/Connect to Server utility, but I can't browse the website that is running on the iMac via the Safari browser.
    Can anyone help me configure my MacBookPro (or iPad, or iPhone) to run the website on the iMac when they are all on the same network?
    Thanks so much!!

    1) connecting the TC using a ethernet cable from one of the two modem's LAN ports to the TC's WAN port
    2) create a new Wi-Fi network using the TC ?
    Does someone already create a new Wi-Fi network using its TC connected by Ethernet on a modem/router device ? How do you set up the DHCP (and NAT) ? Which range did you use ?
    This is easy enough to do..
    Plug the TC directly into a computer.. without other connections to do the setup.
    Using the newly installed 5.6 utility.
    Bridge the TC.
    Create a wireless network.
    This is an older screen shot and I would set security to WPA2 Personal only not WPA/WPA2 Personal as shown above.
    I do recommend you use wireless names that are short, no spaces, pure alphanumeric.
    Update the TC..
    Now plug it into the modem router.. it will be a part of the network without doing NAT and DHCP itself.. which you do not want.. that leads to double NAT issues.. but it is a WAP that provides access to devices on both 2.4ghz and 5ghz bands directly to the main router.

  • How do I setup Airport Express to extend my CISCO router's wifi range?

    Hi,
    I am using CISCO EA4500 router for internet connection via wifi. I have Airport Express with me, which I want to use as extender of the wifi network. I setup the Airport Express as "Extend the wireless network", provided same base station name (CISCO), network name (JKS) and passwords.
    However, I am not able to get it to work. Its gives me error saying network: unknown.
    I have just 1 BHK flat, and even then the range is not enough to reach from my DR to BR. I tried using Airport Express as the base station as well. But the problem is again the range.
    Help me please.
    Jayesh

    Can I do it other way around? I mean setup Airport as Base station and use Cisco to extend the wireless network?
    I doubt that the Cisco router would be able to to wirelessly extend the AirPort network, since Apple uses proprietary settings that are designed to work with other Apple routers.
    Also, when I am trying to use just Airport, I am not able to connect multiple devices at the same time
    Sorry, but I don't know whether you have the AirPort connected to the Cisco router using an Ethernet cable....or.....whether you are saying that you have the AirPort connected directly to your modem using an Ethernet cable.
    If the AirPort is connected directly to your modem.....what is the make and model number of this device?
    Since you know that the Cisco router is working OK when you have it connected to your modem, things would be much simpler if you connect the AirPort to the Cisco router using an Ethernet cable.  Can you do this?

  • How do I setup Airport express with ethernet connection to my modem?

    Hi there - hoping to get some helpg as I'm having challnges setting up my Airport express via ethernet cable connection directly to my router.  It will setup wirelessly no problem, but I occasionally get dropouts when streaming music and I'm hoping to remedy that with a direct cable connection.  I know I have to change some settings in my airport utility, but haven't had any luck getting it right. 
    Here is my setups if it helps:
    Airport express, 1st generation, model A1264
    Cisco router (provided by my intenet provider)
    Macbook Air, running 10.8.5
    Airport utility version 6.3.1
    Thanks!
    Phil

    Unfortunately, you are getting incorrect advice here. Might be a good idea to start a new post, since the original thread is long out of date.
    First, please confirm that you have a compatible Express with the AirPort Extreme. This would be either the current A1392 version.....or the previous A1264 version.
    Next, we need to confirm "how' you want to extend, since you do not mention this in your post.
    Are you planning to "extend" by connecting the AirPort Express to the AirPort Extreme using a permanent, wired Ethernet connection (highly recommended).....or.....are you trying to "extend" by having the Express try to connect wirelessly to the AirPort Extreme?

  • How can i run AirPort Express for both a Mac and Windows 2000 SP2?

    I have my AirPort Express set up for my iMac and it runs fine. We have a house guest who has a laptop running Windows 2000 SP2. Can I set up Airport so that both computers can access internet wirelessly?

    Just did a quick check of the Unofficial Averatec Support Forum. Several posters there upgraded the driver for the wireless card to support WPA on the 5110.
    They used drivers from other computer manufacturers and indicated that Averatec has not provided updated drivers.
    They were running XP SP2.
    Many Averatec models have weak wifi cards. Mine included. Sorry I am unable to be of more help.
    Good luck
    susan
    iBook G4   Mac OS X (10.3.4)  

  • How can I use airport express to over-ride TWC wireless ubee?

    I currently pay Time Warner Cable $6 a month for the wireless feature of their regular internet service, administered via a ubee modem. I want to cancel this service and instead run my wifi through an Apple Airport Express. But when I plug it in and try to use it, it flashes amber (I gather I need to disable the TWC wifi first, but don't know how to do this and TWC are reluctant advisors.)
    Any help greatly appreciated.

    It is always a good idea to perform a complete power recycle of your networking equipment any time you make hardware configuration changes.
    Please try the following:
    Power-down the modem, AXn and computers; leave them powered-down for 10-15 minutes. Note: Power-down order is not critical.
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AXn; wait at least 5-10 minutes. Note: The AXn may continue to flash amber as it may still require some additional configuration changes (like enabling wireless security) before it will go solid green.
    Power-up your computers.
    Wireless clients, connected to the AXn, should now be able to access the Internet. Please post back your results.

  • How can I use Airport Express (2004 version) ethernet port?

    I am using a Time Capsule to access the internet. Now I would like to use my old AE to "root" that internet connection via the ethernet port to my WD HD TV Live (or Notebook w/o wifi).
    I know that it is possible with the newer airport express version coz a friend has it setup. But I could not make it work with the AE 2004.
    The latest available firmware is 6.5.3 while on the AE 2008 it is 7.5.2
    Any suggestions?

    dirk2gently, welcome to the discussion area!
    Unfortunately, your older version of the AirPort Express does not have the capability to "extend a wireless network", so you'll need to use the 802.11n version of the AirPort Express to do what you want to do.

  • How can I connect airport express to an external dac connected to stereo amp, How can I connect airport express to an external dac connected to stereo amp

    Hi just purchased airport express, how do I connect it an external dac which is connected to a stereo amplifier, what interconnect cables should I be using"" thanks

    Normally, you would need a Mini Toslink to Toslink cable. Example below:
    Amazon.com: 6ft Toslink to Mini Toslink Cable: Computers ...
    Most electronic superstores will have what you need as well.

  • How can use my Airport Express 802.11n with IOS X 10.9.4?

    I have two Airport Express unit (802.11n) used to connect my upstairs and downstairs HiFi amps to my music collection (On a Mac mini and on my MacBook).  I keep my software up to date and my Airport Express units have now lost connectivity with my updated computers.  They do not even appear in UTILITIES/AIRPORT UTILITY - so I cannot reconfigure.  I have tried pressing the reset button and have tried "Googling" it but have had no success.  Any suggestions would be gratefully received.

    Both say A1254 (I think)
    A1254 is not a model number for an AirPort Express, but if you meant to say A1264, that is an 802.11n model that is compatible with AirPort Utility on an iOS device and also the Mac running Mavericks (10.9.4).
    If you have pressed the reset button as you say above (held it in for 5-6 seconds or more), then the AirPort Express devices are reset back to factory default settings.
    When you open AirPort Utility on the Mac and click on Other Wi-Fi Devices, you should see the AirPort Express. Click on AirPort Express to start the setup process and follow the prompts.

Maybe you are looking for

  • Mac or Windows ?  for graphic design

    Hi, so next year I'm going to study graphic design and I'm going to use lots of programs like illustrator, indesign, photoshop... I've been in trouble all these years trying to fin the best computer for me. I don´t want to spend a lot of money in a l

  • IPhone update problems!

    As alot of people, I have encountered the problem of NOT being able to sync my phone with my G5 ever since the latest iPhone & iTunes updates. The phone lights up and indicates it is plugged in, but it will only appear in iPhoto, and not iTunes. The

  • Flash player will play multiple layers of the song...

    Has anybody run into this problem? Is this because of a setting on my flash media server? On SOME computers, the player will play multiple layers of the same song, making it impossible to listen to. Its ok on the PC not on some MACs. Please help!!!

  • Report 11g -  Hide URL

    Hi, I am calling the report from the oracle forms by using web.show_document working it is fine . Here here problem is url is showing all the parameter and if some one copy and paste and it is working which i don't want(it has security issue ) . I ne

  • Append 3 workarea into internal table

    Hi,   I have 3 workarea and i want to append into one internal table.so how to append. Thanks, Deesanth