How can I share two devices of ipods to the same itunes?

Hello
Ihave one ipod touch , & my sister have another one.
her computer with its itunes is lost, so we have to use my own computer with my own itunes.
so how can I add her separtely without disturbing my downloads?

See:
How to use multiple iPods, iPads, or iPhones with one computer

Similar Messages

How can I see songs on my iPod from the new iTunes

How can I see songs on my iPod from the new iTunes. I used to be able to easily manage manually my music I cannot seem to find how to view music anymore although I figured out how to manually transfer.

iTunes: Syncing media content to iOS devices and iPod

How can i share documents with different users on the same mac?

How can i share documents with different users on the same mac?

Shared how? The other users can read the documents or you all can read and write the documents?
The first is easy just place the documents in /Users/Shared anyone can access the files there and the other users will be able to read them.
The second is a bit trickier.

How can you share music wiyh another iphone in the same house that has not been connected to a compter

how can you share music on iphones in the same houes when one of phones has never been connected to a computer

Hello weeshaza,
It sounds like you are wanting to sync more than 1 device to your iTunes Library. This article will help you do that:
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
Thank you for using Apple Support Communities.
All the best,
Sterling

How can i share tones between different iPhones on the same account

I have two iPhones registered on the same iTunes account - one for work and one personal. I have bought a couple of ringtones through iTunes but find that I cannot see them in the iTunes library so cannot load a ringtone from one of my iPhones to the other. Any suggestion on how I can do this ?
Regards
Kev

You will have to transfer the ringtones from the phone that has them to your iTunes library.
File>Transfer Purchases.
Then you can sync them to the other phone.

HT1766 How can I keep two versions of backup of the same IOS device in iTunes?

HI,
I wish to keep two versions of the same iPad backup in iTunes.
Is it possible? Pl. advice. Thanks. K.V.Ramani

Hi Diavonex,
Pl. see screen shot of iTunes backup.
I have one iPhone and one iPad back up only. Pl. advice. Rgds, Ramani

How Can I Update More Than One Ipod on the Same Computer?

I've had my 30G Ipod since April 2006. For Christmas 2006, I bought my sister a 2G Ipod. I cannot figure out how to put songs on her Ipod as we both share the same computer and Itunes Library. I've already asked Ipod Corporate for help via their FAQ section regarding more than one Ipod operating with the same computer, but their advice (which told me to create a playlist small enough for her Ipod and checked as a shared playlist) did not work for me. I'd really appreciate any help with my problem. Owning an Ipod but being unable to listen to it, as I'm sure many people would agree, is quite annoying.

There are basically two ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library and user account.
b) Creating multiple user accounts and having separate libraries.
Sharing a Library
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish):
Loading songs onto iPod automatically - Windows
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
However since you seem to have a problem with that method you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
Separate User Accounts
Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
If you are unfamiliar with setting up Windows user accounts you can read more here: Using Windows XP User Accounts

How can I run two independant LabView applications from the same computer, without taking a performance hit?

I have two identical, but independant test stations, both feeding data back to a Data Acquisition Computer running LabView 6.1. Everything is duplicated at the computer as well, with two E-series multifunction I/O cards (one for each test station) and two instances of the same LabView program for acquiring and analysing the data. The DAQ computer has a Celeron processor w/ 850Mhz clock and 512MB memory, and is running on Windows NT.
I have noticed that when I run both the applications simultaneously, I take a substantial performance hit in terms of processing speed (as opposed to running just one program). Why does this happen and how can I prevent it? (In t
his particular case, it may be possible to combine both the tests into one program since they are identical, but independant, simultaneous control of two different LabView programs is a concept I need to prove out).
Thanks in advance for any tips, hints and spoon feedings (!)....

Depending on your application, you may or may not be able to improve things.
Firstly, each task requires CPU time, so a certain performance difference is guaranteed. Making sure you have a "wait until ms" in every while loop helps in all but the most CPU intensive programs.
Secondly, if you are
1) streaming data to disk
2) Acquiring lots of data over the PCI bus
3) Sending lots of data o ver the network
you can have bottlenecks elsewhere than in your program (limited Disk, PCI or Network bandwidth).
Avoid also displaying data which doesn`t need to be displayed. An array indicator which only shows one element still needs a lot of processing time if the array itself is large.... Best is to set the indicator invisible if this is the case.
I think
it would be best if you could give some more information about the amount of data being acquired, processed and sent. Then maybe it will be more obvious where you can optimise things. If you are running W2000, try activating the task manager while the program(s) are sunning to see where the bottleneck is.
Shane
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

How can I bind two text view elements in the same line?

Hi all:
In my case, it is not allowed that one text view is in the first line and another in the second line. How can I put them always in the same line?
Thanks.

Hi,
as the window resizes the UIcontrols are also resized if wrapping is enabled and they will be in same row.
as u mentioned they are two containers in root container but appears one by one do as below
for root container
set layout - grid layout
colcount - 2
for 1st child container
set layout -grid layout
set colspan - 1
as u requre 3 Ui control in it
set colcount of child container to 3
add the UI controls
set the colspan of UI controls to 1.
do as same for second container
Thanks,
yashpal

How can I get two cameras to aquire at the same time rather than one after the other

I've got (2) PCI-1428 cards, Two Uniq Vision cameras with power supplies, cameralink cables, and IMAQ-D6804 cables. Both cameras are being triggered by the same switch, but they are not grabbing images at the same time. Right now it is triggering one camera as desired, but the other doesn't aquire until after the time-sensitive event. On the next test, the two camera will trade these roles. I am using 2 cards, so they should acquire at the same time. How do I change it so that they grab images at the same time? Thank you for your help.
Deater

Hi Deater,
Thank you for your post. Triggering from two cameras at the same time may be a little trickey, but it can be done. There are multiple ways to tackle this problem. If you have a RTSI cable, you can RTSI the two PCI boards together internally to lock them in HW. You should also be able to use the triggering line on each board.
One of the best methods for triggering multiple boards is called GenLocking. The following Developer Zone page describes GenLocking more fully and has several examples to help you out: http://zone.ni.com/devzone/conceptd.nsf/webmain/a387b5c0ac6f6f4e86256c87005fcddf.
The "HL Grab with two boards.vi" shipping example is also a good example of the code needed to trigger two individual boards in LV. I found a similar post that may be of some help as well: http://forums.ni.com/ni/board/message?board.id=230&message.id=2691&requireLogin=False
Hope this helps!
Thanks,
Scott Savage
National Instruments
Applications Engineering
www.ni.com/support

How do i use two different users iPods on the same computer?

my daughter is in for the holidays, she brought her nano with her, but not her computer. she wants to download music from the iStore from my computer. How can we do this?

http://docs.info.apple.com/article.html?artnum=300432

How can I rotate two or more photos at the same time

That´s what I do: I select various images and then apply a rotation, but only image rotates.
I have tried too applying it to one image and "lift and stamp" to the rest,but this doesn´t work.
Please, how can I do it?

You have got a good answer from Claire, but if you are using a keyboard with a standard Spanish layout, you have to use SHIFT + [ to rotate to the right.
You can also use ´ and ` (to the right of the letter P) to rotate the image. This is the location of the [ and ] on the US layout.
If you use a Spanish ISO Layout on your keyboard, then you have to use ´ or ` since the [ is replaced by the º in the layout.
You can also use the buttons for rotation in the Control Bar at the bottom of the window
Regards
paul k
Mac OS X (10.4.8)

How can I Resize Two or More Shapes At The Same Time?

I've got text over a rectangle over another rectangle. When I change my text, the size of the boxes needs to change and it's a drag ot have to do each one separately and constantly realign. Is there a way I can resize both of them at the same time tokeep the proportions the same?
Or is there a way I can enter #s to resize, so I could just enter the same #s for each shape?
Thanks,
Amanda

Here's an example of what Wyodor is referring to: text in shapes within another shape.. It goes one step further and adds the first shape+text into another shape but the concept is the same.
OT

How can i get two or more people on the same call on iPhone 5

On my blackberry I can make a call, and then call other people and add them to the call so we have several people on the same line. Is it possible to do this with an
iphone 5?

See page 51 of the iPhone User Manual.
You can add folks to a call only if you use a GSM carrier.
iPhone User Guide for iOS 8.1

How can I share my screen and video at the same ti...

As the title says, I want to share my Mac screen and my face cam (video) at the same time. I looked this up before and I found out that you need a premium account in order to do this...but then I found out that the premium account is no longer available. So, is it still possible?

bump again...please respond! thank you

How can I share two devices of ipods to the same itunes?

Similar Messages

Maybe you are looking for