How can I shoot & Edit a SloMo video like "Wrapped Around Your Finger"?

I have the Canon 7D and I would like to do a slow motion video like the song "Wrapped Around Your Finger" by the band Police.
I'd like to have the song play in RealTime and video play in Slow Motion.
How can I do this?
Can someone guide me with the workflow?
Many thanks in advance,

The whole trick to Wrapped Around Your Finger is that the band performed at a faster speed, then slowed everything down in post-production. So, with a 7D, you could shoot at 60 FPS while performing the song (and by performing, I mean lip-sync, obviously) at 200% speed. Then slow the footage down to 30FPS and the music will sync at regular (100%) speed.
Message was edited by: Eric Bolt

Similar Messages

How can I see thumbnail pictures for Videos like I can see for Jpegs

How can I see thumbnail pictures for videos like I can see for Jpegs in Elements organizer.
Thanks
BillJa

You should get the mobile version of YouTube which sends Firefox a notice to open it in the YouTube App. That will have a much better playback experience than running Flash in the browser.

How can I make a photoshop filter tile or wrap-around edges?

Hi,
I have a procedurally generated image (a bird's eye terrain map). The edges wrap-around (I can tile the image without seams) I applied the Sponge artistic filter on it, but the edges don't match anymore.
Is there any way to get a Photoshop filter to recognize the opposite edge's pixels so that it maintains my tile effect? Thanks.

I don't know of a way to make the filter you ran on it recognize that you wanted to maintain the tiling ablility on the edges.
If you aren't concerned with it looking exactly the same you could always run the process of Filter/other/overpass using 50% pixels both ways and "wrap" and get a new tile. It will move things around though, yet it only takes a minute or two and looks similar.
I suppose that is maybe how you made the tile in the first place, in which case this wouldn't help to keep the image as you had it and just correct the edges.
Message was edited by: LMn0P

I want to break up my hour long video in iMovie 11 into smaller 15 minute segements to upload to youtube. How can i put EDITED VIDEO in new projects in iMovie?

I want to break up my hour long video in iMovie 11 into smaller 15 minute segements to upload to youtube. How can i put EDITED VIDEO in new projects in iMovie? (each 15 minute segment to iMovie)

In iMovie's Project Library view (where all your projects are listed), click on the name of your project (don't double-click to open it, just single click to highlight it).
From the Menu select File > Duplicate Project. A copy of your project will be placed in the Project Library. It will have the same name as the original, but with a number appended. You can rename it if desired - click on its name twice (not double-click) so that it is highlighted as light blue, then over-type it.
Delete from the duplicate all the clips and other media (for example, photos, music and so forth) that you don't want included in the first of your 15 minute segments. In other words, delete all but the first 15 minutes.
Continue creating duplicates of the original (and rename if necessary). Delete from each duplicate all the unrequired parts for each segment. So, for example, for the 2nd duplicate delete the first quarter (15 minutes) and the 3rd and 4th quarters.
You should end up with 4 duplicates with separate names, each containing the required segment. You will also have kept intact the original one hour movie, which you may wish to use independently of YouTube (maybe for burning a DVD or playback through a Media Player).
Note that duplicating the original project will not take up much extra space on your drive. Projects reference (link to) the associated Event (or Events) in the Event Library - they don't actually contain video as such. The project file also keeps track of titles, transitions, effects, music and so forth that you've added to the project.
John
Message was edited by: John Cogdell

How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?

How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?
I have PremierePro-CS5 installed.
This stereo 3D camcorder (Sony HDR-TD10E), output an .MVC (MultiViewCoding) file, coded in H.264 format.
This format is already compatible with Bluray3D stereoscopic format.
1) But, how to edit the .MVC in Premiere?
2) What plugin should I use (if exists) for PremiereProCS5?
3) Cineform Neo3D, can manage the .MVC format? Can convert it to Cineform format file, for import it into Premiere?
4) What software should I use to convert an .MVC video to an AVCHD H.264 file, and import it into PremierePro CS5 or CS5.5 for editing?
Thanks!
Horsepower0171.

Sorry, I am Italian, it is very difficult for me to understand what he says!
I can just read the english text, or follow the actions of a videotutorial!
Thus my question is the same:
-What software can do that?
-Sony Vegas 10 do the Bluray3D authoring?
-For MVC editing, should I wait for Adobe CS6? Or is it planned an update for CS5.5?

How can i quick edit Audio( increase bass) of a single file?

Hi everyone,
Im new to FCPX. I have a bunch of videos of music gigs ive played and would like to increase the bass (via equalizer) on most of them. All these videos are already converted into an "Apple Friendly" format and are sitting comfortably in my Itunes Video folder. How can i quickly increase the bass in each video (Without having to tediously export one by one) in FCPX and do a quick overwrite over the original video without having to make an EXTRA file?
THanks

ok.
"Why don't you increase the bass with the equalizer in FCP? Do it to one clip and use paste attributes to apply it to other clips."
1) How do i copy the attributes after making the changes??
2) How do i paste the attributes onto the next file?
Thanks.
Re: How can i quick edit Audio( increase bass) of a single file?

How can I download a 18 minute video I recorded from my iPad to either email or youtube or vimeo I keep getting the message the file is too long.

How can I transfer a 18 minute video I recorded on my iPad camera app to email/youtube or vimeo? I keep getting the message the file is too long do want to send clips?
Thanks

Youtube usually had an 8 minute length cap, which may be part of your issue. Also at 18 minutes that is probably a gig+ file size, which will also take a long time to upload and may be another part of the issue.
Edit it down as jim suggested. Or you may need to use something like dropbox, to get it off your ipad and onto a computer where might have more options to edit it down or size it down.
If it's just file size you can transcode it into a smaller file - a lower quality MP4 for example. If it's the length that's an issue for youtube, you'll need to break it up into a couple different files and upload part 1 and part 2

How can I extract a piece of video from a DVD ?

Dear all,
I recorded a DVD of a TV broadcast. I'd like to get an extract from it and use it in a presentation later (such as powerpoint).
How can I extract the piece of video ?
Is is possible to record it with quicktime (for example) or any other application ?
thanks for your help
Didier

MPEG Streamclip and the Apple MPEG-2 component will allow you to edit the VOB files off the DVD and export to MPEG-4. Searching here will provide this answer several hundred times as it is asked a LOT. More so for iPod users. You cannot export or edit and then export MPEG1/2 with Quicktime unless you do not need the audio as there won't be any.

How can I join up my home videos in order to see them together rather than in short bursts? IN SIMPLE TERMS PLEASE.

How can I join up my home videos in order to see them together, rather than in short bursts? In simple terms please?!

You can research into the iMovie app and see what it'll do. I'm afraid I've never used it. But I know it does have a section on this forum so maybe someone there can answer your question.
The only other way I can think of would be to get your files off your iPad and onto a computer and then get a video editing program (there are several that are inexpensive) and use that to put them together.

How can I still edit my iWeb site on new iMac

My mid 2007 24" iMac which has served me well has memory problems. I now work with much larger projects ( Logic Studio + video ) than earlier, and have to continually keep clearing the memory as I work. I have the maximum 4 GB RAM ).
This is halting progress so seriously that I'm considering changing it for a new iMac .... 27".
My question is: How can I still edit my iWeb site on a new iMac, when iLife is no longer included, and so presumably OS 10.7 doesn't support iWeb ?
Will be grateful for insights.
Thanks,
SeaDream.

Well thanks. Sounds so complicated, though. Would another option be to backup my present Mac HD ( with Snow Leopard ) to an external HD and simply edit iWeb from there ?
As long as I also backed up this external HD, would this be a possibility ?

How can a customer edit a web page that I have made?

How can a customer edit a web page that I have made? The customer should edit the text or pictures by himself. Is this possible?

First you can search in this forum "in browser editing".
Second you may be interested in this video:
http://tv.adobe.com/de/watch/designtools-in-der-creative-cloud/bearbeitung-im-browser-in-a dobe-muse/

How can I determine the type of video out connector I need?

Howdy,
I have a white macbook purchased Jun/2008. I want to connect to a TV but don't know what adapter I need. How can I determine the type of video out jack my macbook has?
System Profiler says the model identifier is "MacBook 4,1". Under Graphics/Displays the only thing it says about the "Display Connector" is that no display is connected. Too bad it doesn't tell me what type of connector it is. If I knew the name of the connector I'd probably be home free. But it seems like every macbook model has a different video connector (since the state of the art has advanced over the years) and I haven't been able to keep up with the names.
Now, I have a 6" long adapter that will convert this connector to VGA. And searching the Apple store for VGA adapters, the existence of mine says my connector is might be one of "Mini DisplayPort", "Apple Mini DVI", "Apple DVI", or "Apple Micro-DVI". But then there is also the connector at
http://store.apple.com/us/product/M8639G/A?mco=MTY3ODQ5OTY
and that looks like the one I have. But unlike the other adapters, this one is just called a "VGA Display Adapter". Does the connector have a name? How can I find adapters that have that same connector?
I know I could use the adapter I have, plus a VGA to VGA cable, to hook up to a TV. But the quality of the VGA signal is poor in the digital world. My goal is to hook up to the TV via HDMI. Is this even possible? By which I mean, will my macbook generate the signals necessary to be able to be converted to HDMI?
Thanks for any help,
Zebulon T

Thanks, Ded,
You're right, the cable that I have won't work. I't from my previous, 2004 iBook. This is pretty embarrassing... I looked at the cable but didn't bother to try plugging it in.
Looking at the close-up picture of the Mini-DVI to VGA adapter, that does look like the right connector. So I have Mini-DVI, and the other apter you pointed to can convert this to DVI. I'll take a look to see what makes the most sense, connector wise, downstream from that.
Thanks very much.
Zeb T

How can i make a free facetime video call? There's always appearing that my provider might charge for the call?

How can i make a free facetime video call? There's always appearing that my provider might charge for the call?

If you make a call then tap the Facetime button to connect Facetime, the duration of call up to Facetime connection will be charged under your regular airtime. However, duration during facetime conversation will not consume airtime.
But if you tap the Facetime button on the Contact Page, then the whole duration will not consume airtime.
For Facetime to work, both parties must be connected to wifi.

How can i adjust my display on videos. Result is dark same as with the camera . Thank you

How can i adjust my display on videos and camera. Result is dark same as with the macbook camera . When i play videos , its dark . Please help.
Thank you

Solution may be found if you search in the "More Like This" section over in the right column.
By camera you mean "iSight" try the suggestions in the article http://support.apple.com/kb/HT2090 and on EZJim's Website. If no help, post in the iSight forum area.

HT5177 How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.

How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.

Have the project, events and media on one drive which is common to both macs.
You can download FCP X to both macs using the same Apple ID that it was purchased with.
Andy

How can I shoot & Edit a SloMo video like "Wrapped Around Your Finger"?

Similar Messages

Maybe you are looking for