How can i show 2 videos at once imovie09?
How can i show 2 videos at once using imovie 09?
camro1050 wrote:
Yes I mean 2 video side by side. How do I do that in iMovie 11?
From iMovie Help:
To add a side-by-side clip:
Make sure Advanced Tools are turned on.
Open the project you want to add the side-by-side clip to so that it’s showing in the Project browser.
In the Event browser, select a video clip or a frame range that you want to use as a side-by-side clip, and then drag it over a clip in your project.When you see the green Add symbol, release the mouse button.
In the contextual menu that appears, choose “Side by Side.”In the Project browser, the side-by-side clip appears with a blue border around it above the video clip you added it to, at roughly the spot where you added it (toward the beginning, middle, or end of the clip).
Depending on the length of the side-by-side clip you added, it may extend beyond the clip you added it to (only if there’s another clip after the clip you added the side-by-side clip to). You can drag the split-screen clip so that it begins at a different point in the main clip. To reposition where the split-screen clip appears in the project, drag it to a different clip.
Play back the effect by placing the playhead (the red vertical line) anywhere before the side-by-side clip in the Project browser, and then pressing the Space bar.Press the Space bar again to stop playback.
John
Similar Messages
-
My Samsung TV has a USB port. When I connect the cable from the iPad to the TV I can only show Pictures and Music. Why does the videos not appear and how can I show videos on the TV.
This article should help you with that:
http://www.ehow.com/how_7211806_display-iphone-tv.html
Take care -
how can i add videos,movies and tv shows episodes to my ipod nano?I want to know whether i can directly add them through my pc or not without downloading them from i tunes store?
Yes, you can add your own videos to iTunes, then sync them to your nano, subject to supported max resolution limit and file type. The specs for the 7th gen nano says (I don't know which nano model you have), Video Format Support
"H.264 video: 720 by 576 pixels, 30 frames per second; Baseline, Main, and High-Profile level 3.0 with AAC-LC audio up to 256 Kbps; 48kHz; stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video: up to 2.5 Mbps, 720 by 576 pixels, 30 frames per second; Simple Profile with AAC-LC audio up to 256 Kbps; 48kHz; stereo audio in .m4v, .mp4, and .mov file formats"
http://www.apple.com/ipod-nano/specs.html
(earlier nanos have lower max resolution limits)
So, "HD" video is too high resolution, so iTunes will not sync such videos to the iPod (although they play in iTunes). If you are asking how to set up iTunes to sync videos in general (regardless of source), please post back. -
I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to download photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please?
The file name only has 6 characters and I'm not sure what the .mod format is. So that's why they are not seen by the iPad.
Another way to transfer. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
Cheers, Tom
Look at this link for convertion the .mod format.
http://www.makeuseof.com/tag/convert-mod-camcorder-video-format-mpg-instantly/
Message was edited by: Texas Mac Man -
How can i move video and music and narration all at once in the project library
how can i move video, narration and music all at once in the project library it is only moving the video
Select the directory with your pngs in it.
Right-click>Browse with Adobe Bridge
Select your pngs
Tools>Photoshop>Load to photoshop layers (not sure how many layers this can handle--you may wind up having to do this in batches)
Save your new psd
In Flash, create a new symbol with a blank timeline
Ctrl-R, navigate to the psd you made earlier
Select all the Photoshop layers
Check "create MovieClips for these layers."
Convert layers to keyframes or flash layers (not important, since you probaby don't need to keep this symbol)
OK
You'll have Movie Clips, not Graphic Symbols, but maybe you can write or find a JSFL to convert them and then you can block select them, click the Properties button, and change the type from MovieClip to Graphc. -
how can i remove videos and music that have been deleted from the ipad but are still showing in settings as still being on the ipad?
I believe that I have the same issue with iPad Mini with Retina Display, iOS 8.1. No matter which way I delete videos from my iPad, they will still show as "deleted", yet the space is not cleared up. I tried restore and then a full restore (clean setup as a new iPad) and it still does this to me. I can solve it by doing a restore each and every time I download a video and delete it. Rather frustrating. Has been a problem since day 1 of iOS 8. I'm yet to try the power+home button reset. It may very well work, but I am surprised that a "fresh setup" of an iPad didn't resolve it from ever occurring.
-
CAn someone help? How can i play videos on my iPod through three ordinary TVs at once?
Can anyone help please? How can I play videos on my iPod through three non Apple TVs at the same time?
i had this pb with my sis ipod, you have to convert the videos to put them on the ipod, here is the french tuto (never found it in english, and this always works).
http://www.zdnet.fr/produits/materiels/baladeurs/0,39049657,39295399,00.htm
you have to install avs video converter and then well im not going to translate everything but it explains you all the settings to put to have a video for you ipod. after it was converted like the website says open itunes and then drop the conveerted file to itunes and it will work (well it did with me) -
How can we show data in rows when it is in Columns........
I have strucked with a simple but a complex problem.
I have a Report with data in vertical rows..need of the hour is how can we show that data into column structure.
here is the table sample which i have in Database..
Location chrg_type Effective_date
xxxxxxx xxxx xx-xx
thhis is the structure in effective date we have several months in it in a single column i want show the effective date or effective month in various columns instead of a single column.
my required table is....
Effective_date Effective_date
Location chrg_type xx-xx xx-xx
xxxxxxx xxxx xx-xx
any tough heads?????Hi Sunil,
Your 1st problem is that you are going to need one more field to accomplish you goal. What type of data do want under your new date columns?
Anyway, once you have that you need to move on to how to move the data out into columns based on date.
Try something like this.
0_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',CurrentDate) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',CurrentDate)
THEN {tbl.DataField}
1_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -1, CurrentDate)) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -1, CurrentDate))
THEN {tbl.DataField}
2_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -2, CurrentDate)) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -2, CurrentDate))
THEN {tbl.DataField}
... Repeat this process until you have all of the columns you need, following this format.
Hope this works for you,
Jason -
HOw can i show a table(name given in parameters) in a report program
I made a report in which there is a paremeter asking for a table name ....
PARAMETERS TBLLE_NAME(10) OBLIGATORY.
Now when I enter the table namke then how can i show its values....
HINT:- We have to use fiels symbols....AND THE USER CAN ENTER ANY DDIC TABLE NAME having some records ...........You can display the contents of the DB table inputted using ALV.
Pass the Structure name as the DB table name inputted.
Use CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE to create the dynamic table of the same structure as the DB table passed.
Once the above steps are done, the internal table with data can be displayed using ALV.
Reward points for all helpful answers.
Thanks,
Balaji -
How can I download video from a Canon ZR30 video camera to my IMac? I have Elgato Video Capture, but the provided connectors are loose in the camera and the camera does not have a white female end. No signal shows up on the computer when I connect the red and yellow connectors.
Broken solder joints on the camera me thinks!!
sorry -
How can I stream videos that come into my imac directly to my AppleTV and then my TV
how can I stream videos that come into my imac directly to my AppleTV and then my TV?
Or... you can just use a 3rd party solution.
Best solution for streaming audio and video to your Apple TV from an Mac or Windows PC... without using iTunes... is Airparrot. You can screen share your Mac to your Apple TV. It even lets you select your overscan/underscan and video quality.
Download it and install. It shows up in your system tray. As long as you are on the same network as your Apple TV, just right click the Airparrot icon and select Apple TV as your Airplay device.
http://airparrot.com
Then hook up your wireless keyboard and mouse and plop on the couch for some supersized web browsing.
It's 20 minute sessions for the free version, $9.99 for full and can gift to someone for $4.99 if you buy for yourself. -
how can I easily video screen capture my interactions on an ipad2 so I can play back to demo content I have created?
Hi,
Thanks for the response but I know how to do a screen capture but wanted to be able to capture myself interacting with the ipad ansd turn into a movie i.e. showing all the movement / animation etc as I interact.
I have now figured out a good solution. Using AirServer you can wirelessly connect you ipad to your mac/pc then using a video capture solution like Snapz Pro you can capture what you are doing to create the video.
Cheers -
How can I delete videos and other things uploads to icloud ?
How can I delete videos and other things uploads to icloud ?
If these are purhased movies they are not stored in your iCloud account and cannot be deleted. They are stored in the iTunes store. What you are seeing are links to your previously purchased movies, allowing you to redownload them.
If you don't want to see these in the Videos app, go to Settings>iTunes & App Store and turn Videos off under Show All. -
How can I preview video files in quicktime
How can I preview video files in quicktime by click on the space bar like i use to with leopard?
I like to pull up all of my video files and arrowing down and hitting the space bar and previewing them.
I cannot do that with all of my video files just some of the video files are able to be previewed.
Some of the files show a thumb of the video and some just show the quicktime logo are other logos
I am running the latest Lion
Thanks.You need to investigate BLOB = Binary Large Objects.
Start with Google where you will find plenty of info to start with.
Next time, you'd better mentioned the OS and Oracle version (4 digits) that you are using.
HTH,
Thierry
Isn't it what you already asked?
Storage of AVI files in Database -
How can i stream video and audio from macbook air to my tv?
how can i stream video and audio from macbook air to my tv?
Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.
Maybe you are looking for
-
Hi Gurus, I am trying to insert picture in one of the mail form, after inserting and when i click on SAVE, I get a display " Your session has timed out! Click here to restart. ". I have added the picture ( .BMP) file in the SE78 transaction. Please h
-
Hi, My first step in workflow is a background step which gets first level and second level approvers. I need to determine the approvers and pass back to the workflow. When I execute the method in SWO1 the approvers are returned properly.. When I pas
-
4. Intercompany Transactions There are two Company Codes 1000 & 2000. 1. ASCM to transfer Assets to 2000 2. While transferring the Assets through ABT1N the Asset is transferred through a Clearing Account. 3. The entries passed are a.
-
hello again! the led is on all the time on my precious playbook 64GB! - green, yellow or red depending on the battery status. any suggestion for closing the led? - aside from sticking the bubble gum, coloring it with some permanent marker or defini
-
Use free iPod Touch discount for an iPad
Hello, I would buy a MacBook Pro for college and I saw I can get a free iPod Touch 8GB. It cost $199, can I use this discount for an iPad or an iPhone? Thanks Julien