How can I show an image before my animation starts playing

Hey there!
First of all, great work on making Adobe Edge...! I can see real potential in the use of this program!
I have started to work on an animation which will work as a splash-screen before the users see the actual site. (Yes I know... but the client wants it like this...)
The problem I have now is that the animation plays after a few seconds and that during these seconds it shows the content of the website. Besides that I still find it pretty difficult to actually position the animation the way I want.
I am using a plug-in for wordpress so I might not be in the right place to find help.
I tried fixing this with a pre-loader but this is also too slow. Is there any way I can force the animation to play sooner or to make sure they can't see the content before the animation has played?
You can find the concept of the website on: www.appyourservice.nl/concept/Jack.
Any help is appreciated.
Cheers,
Dominic

For sure,
It's also in my reply above. What I did is add an other div to my website which overlaying the complete content.
Then you add in the animation a line to hide this div before the animation starts playing like so:
So add this to the stage in "CompositionReady" --> jQuery("#div").hide();
This will make sure that the animations hides the div before playing so you will see first only the overlaying div and once the animation is ready to play, this div will hide and the animation will start.
Hope this helps.
Cheers,
Dominic

Similar Messages

Flip Animation Is Showing Next View BEFORE The Animation Starts

Hi All,
I am trying to do a flip animation, but the new subview is showing BEFORE the animation takes place rather than 1/2 way through the animation. It looks really bad. Can anyone see what I'm doing wrong... I've checked the elements application and mine looks pretty similar...
// setup the animation group
[UIView beginAnimations:nil context:nil];
[UIView setAnimationDuration:0.75];
[UIView setAnimationDelegate:self];
// [UIView setAnimationDidStopSelector:@selector(transitionDidStop:finished:context:)];
// flip views
[UIView setAnimationTransition:UIViewAnimationTransitionFlipFromRight forView:self.view cache:YES];
[questionCard removeFromSuperview];
[self.view addSubview:answerCard];
[UIView commitAnimations];
Thanks
Ray

Ok, I've stripped this down to it's bear bones and it's still not working. Here's what's left and when I swipe from right to left it displays the label and THEN animates...
// PlayGameController.h
// JapaneseMyWay
// Created by Ray on 4/22/09.
// Copyright 2009 _MyCompanyName_. All rights reserved.
#import <UIKit/UIKit.h>
#import "GuessingGameQuestionCard.h"
#import "GuessingGameAnswerCard.h"
// this controllers view contains the main area for playing the game. sub views for flash cards are shown.
@interface PlayGuessingGameController : UIViewController {
CGPoint gestureStartPoint;
UILabel *testLabel;
-(void)flipCard;
@end
// PlayGameController.m
// JapaneseMyWay
// Created by Ray on 4/22/09.
// Copyright 2009 _MyCompanyName_. All rights reserved.
#import "PlayGuessingGameController.h"
@implementation PlayGuessingGameController
// Implement loadView to create a view hierarchy programmatically, without using a nib.
- (void)loadView {
// create a new view for this controller
self.view = [[UIView alloc] initWithFrame:[[UIScreen mainScreen] applicationFrame]];
// Implement viewDidLoad to do additional setup after loading the view, typically from a nib.
- (void)viewDidLoad {
[super viewDidLoad];
-(void)touchesBegan:(NSSet*)touches withEvent:(UIEvent*)event {
NSSet *myTouches = [event touchesForView:self.view];
UITouch *touch = [myTouches anyObject];
CGPoint point = [touch locationInView:self.view];
// save start point
gestureStartPoint = point;
-(void)touchesMoved:(NSSet*)touches withEvent:(UIEvent*)event {
NSSet *myTouches = [event touchesForView:self.view];
UITouch *touch = [myTouches anyObject];
CGPoint point = [touch locationInView:self.view];
// if we swiped right to left
float minLength = 25.0f;
float maxVariance = 5.0f;
// did we swipe right to left?
if (gestureStartPoint.x-point.x > minLength && abs(gestureStartPoint.y-point.y) < maxVariance) {
// flip card
[self flipCard];
-(void)flipCard {
// setup the animation group
[UIView beginAnimations:nil context:nil];
[UIView setAnimationDuration:0.75];
// flip views
[UIView setAnimationTransition:UIViewAnimationTransitionFlipFromRight forView:self.view cache:YES];
testLabel = [[UILabel alloc] initWithFrame:CGRectMake(0, 0, 240, 320)];
testLabel.text = @"test";
[self.view addSubview:testLabel];
[UIView commitAnimations];
- (void)didReceiveMemoryWarning {
[super didReceiveMemoryWarning]; // Releases the view if it doesn't have a superview
// Release anything that's not essential, such as cached data
- (void)dealloc {
[super dealloc];
@end
Thanks
Ray

Photos in album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

How can I attach an image without the image is in the email body? (using the new mail the Lion)

How can I attach an image without the image is in the email body? (using the new mail the Lion)
I want in attachment, not in the body mail.

I think your only solution is to zip the image files first and then attach them.
Read this from a site I found:
Sending Graphical Attachments -- When you attach a graphical image to your message, the recipient of your message sees the image inline (that is, in the body of the message) if her email client supports inline display. ("Take Control of Email with Apple Mail" contains a table listing the capabilities of popular Mac and PC email clients.) If a client does not support inline display (or the recipient has turned off the inline display option), the file appears as an attachment that must be opened in a separate program.
On the one hand, an inline image is easier for the recipient to see - all she has to do is look at it. On the other hand, inline images can be frustrating to scroll through. If you do not wish to send a graphical image inline, you must compress the file before attaching it - Mail, sadly, lacks a built-in compression option, though fortunately for Panther users, the Finder offers Zip compression without requiring a separate application.
Note that when you compose a new message, Mail always shows attachments in the body of your message. You can manually drag them somewhere else, but many email clients display all attachments in a separate list, regardless of where you place them in the message body.
If you paste an image into a message or drag & drop an image from another window (say, a Web browser), Mail converts the raw image data to an attachment in TIFF format. On the other hand, if you drag & drop the icon of an image file (or use the Attach button to locate the file using the file browser), Mail leaves the attached image in its original format. This difference is significant, because although most email clients can display JPEG images just fine, support for TIFF - especially in non-Mac email clients - is less common. If possible, I suggest attaching image files as opposed to pasting or dragging in raw image data.

Re: How can I post an image?

Merging the hints, how does this look?
Showing an image in Apple Discussions requires two things.
1. The image has to exist and be accessible from a working server somewhere.
2. Then the image can be referenced in html and will appear in your post.
1. To achieve the first you need to register on one of the many free web photo hosting sites. An example of one would be Flicker. (If you have your own web site you can of course host your picture there.)
Having taken a snapshot of the thing in question (the image), perhaps by using the Grab application on your Mac, you upload the image to your photo hosting site.
You'll then need to get its URL from the site. It might be easy to see or you might have to read the site's FAQ for those details, as there are differences between sites.
Easier still, if you are using Safari or Firefox right clicking (or Control click with a one button mouse) on the uploaded image will copy the link for you.
It will have a form like this:
http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg
When you find it, open a new tab in your browser and paste it into it, to check that it displays and is therefore the correct URL for the image.
2. To add this image to your post here on Apple Discussions, place an exclamation point before and after the link, illustrated as,
!http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg!
which produces the image in the post.
!http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg!
An alternate html format is;
<img src="http://source.address.of.image.jpg"/>

How can I post an image? (Revision 2. Thanks to rrcharles)
Showing an image in Apple Discussions requires two things.
1. The image has to exist and be accessible from a working server somewhere.
2. Then the image can be referenced in html and will appear in your post.
1. To achieve the first you need to register on one of the many free web photo hosting sites. An example of one would be Flicker.
Having taken a snapshot of the thing in question (the image), perhaps by using the Grab application on your Mac, you upload the image to your photo hosting site.
You'll then need to get its URL from the site. It might be easy to see or you might have to read the site's FAQ for those details, as there are differences between sites.
Easier still, if you are using Safari or Firefox right clicking (or Control click with a one button mouse) on the uploaded image will copy the link for you.
It will have a form like this:
http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg
When you find it, open a new tab in your browser and paste it into it, to check that it displays and is therefore the correct URL for the image.
2. To add this image to your post here on Apple Discussions, place an exclamation point before and after the link, illustrated as,
!http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg!
which produces the image in the post.
!http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg!

How can you use one image and edit it three different ways to export later?

I am a new Lightroom 3 user. How can use the same image and edit it multiple ways to produce mulitple images to later export? For example, I have a picture of a bride and groom. I want to use that image and create a color image, a black and white image, and a close up of their hands.

Do I need to do either of those options before I start editing the image at all? For example, what if I am working on the image and doing some creative edits. Then I think of another option that I could do. Is it too late at that time or can I still get the original image to begin with?

How can i control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?

Sup buddies,
How can I control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?
As the project grows in size the load time increases. How does one control not loading all images ,divs,elements etc. until they're
needed on the timeline? For example some sections are off and only become visible when recalled. My projects slowly grow in size so loading
all images , is counter productive . My other option would be to create separate htmls but that breaks the seamless user experience .
TY...Over N Out...

hello, kiwi
quote: "Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?"
yes.
maybe,...
1. you might think of making DVD backups first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
or,
2. bring in the photographs to hard drive first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
the low rez Previews will stay in Aperture but the high quality Versions will be exported onto DVDs and gone from the hard drive (if you delete the originals).
another way would be to export small about 50-70 pixel wide high quality jpegs to a folder on your Desktop and import & keep these in Aperture Library as a reference. make metadata to show where the original Project DVDs are stored and DVD filing system used.
victor

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

How can I create system image of Win-7 only on drive with Win-7 (NTFS) and Win-ME (FAT-32) system partitions

I am trying to create a Windows 7 Image Backup on my Windows 7 Ultimate 32 bit PC.
I have two bootable partitions on my hard drive. One is NTFS and contains the Win-7 system files.
The other is FAT-32 and contains a Windows-ME system.
When it comes to selecting the drives (partitions) for backing up, both are marked as System, and both are selected. Both are also "greyed out) - I cannot uncheck them.
Furthermore, the Windows-7 imaging utility supplied with Windows-7 returns an error saying it cannot image the disk because it contains a partition that is not NTFS.
How can I select and image ONLY the NTFS partition that contains the Win-7 system? That is what I want to do.

Any of the products listed below will backup the contents (all partitions) of your disk drive. The only limitation is that you must install the backup software in Windows 7. You will perform a "Disk and Partition" backup by manually selecting
the disk and all partitions (NTFS / FAT32) and the Master boot Record (MBR) on the drive. The destination / where the Image Backup will be stored should be an external USB drive. With a "Disk and Partition" backup you can restore any partition
to your existing drive or the entire backup (to the same disk drive or a new drive).
EaseUS Todo Backup Home V7.5
http://www.todo-backup.com/home/home-backup.htm
Free version:
http://www.todo-backup.com/products/home/free-backup-software.htm
Version comparison chart:
http://www.todo-backup.com/products/home/comparison.htm
Includes: Incremental backup, Disk/partition clone
User's Guide: http://www.todo-backup.com/download/docs/User_Guide.pdf
(Note: Install Todo and then create an "Emergency Disk" before you start creating your first image backup)
Version 7.0 supports XP, Vista, Windows 7, 8 and 8.1
Acronis True Image 2015:
Has a 30 day trial version available, trial Key sent to your Email Address.
Note: Cloning and drive initialization (creating a MBR) are not supported in the trial version.
For the trial version, recovery is available only when booting from an Acronis Bootable Media CD.
Install Acronis and then create a bootable Restore/Rescue Media CD before you start creating your first image backup
http://www.acronis.com/en-us/personal/true-image-comparison/
30 day trial : http://www.acronis.com/en-us/personal/pc-backup/
True Image User Guides and documentation:
http://www.acronis.com/en-us/support/documentation/
2014 supports XP, Vista, Windows 7, Windows 8 and 8.1
Paragon:
Free version: http://www.paragon-software.com/home/br-free/
User'sGuide:
http://www.paragon-software.com/home/br-free/download.html
Home Version $39.95: http://www.paragon-software.com/home/brh/
Support: http://www.paragon-software.com/support/
Macrium Reflect Free:
Free version: http://www.macrium.com/reflectfree.aspx
(no technical support available for the free version)
Macrum Reflect Standard ($49.99)
http://www.macrium.com/personal.aspx
Suport: http://www.macrium.com/ticket.aspx
Note: For users who have a Western Digital disk drive there is a free version of Acronis 2013:
http://support.wdc.com/product/downloaddetail.asp?swid=119
Release notes:
http://support.wdc.com/download/notes/ATI_WD_RN_5962.pdf
Users Guide for WD Version:
http://support.wdc.com/product/downloaddetail.asp?swid=119&type=userguide&wdc_lang=en
J W Stuart: http://www.pagestart.com
Never be afraid to ask. This forum has some of the best people in the world available to help.

How can i upload a image file to server by using jsp or servlet.

Hi,
I m gurumoorthy. how can i upload a image file to server by using jsp or servlet without using third party API. pls anyone send me atleast outline of the source code.
Pls send me anyone.
Regards,
Gurumoorthy.

I'm not an applet programmer so I can't give you much advice there.
If you want to stream the file from the server before it's entirely uploaded, then I don't believe you can treat it like a normal file. If you're just wanting to throw it up there and then listen to it, then you can treat it like a normal file.
But again, I'm not entirely certain. You might be able to stream the start of the file from the server while you're still uploading the end of it, but it probably depends on what method you're using to do the transfer.

How can I manually attach images from my photo booth (imported into iPhoto) to emails? Auto function, in photo booth has my photos lying sideways?

How can I manually attach images from my photo booth to iCloud emails?
They are imported as 'events' into my iphoto library.
Auto function, in photo booth has my photos lying sideways when placed in 'mail' emails?

There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Crystal report xi r2 can't show control image

i use vs2008 to develop asp.net
Crystal report xi r2 can't show control image , not show print , export and all control image and when i click
print or export image it error but other control are work. i run web application by debug mode in vs2008
please help me to solve this problem.
thank for advance

Hi,
You are facing issue as you are using non compatible environment.
VS 2003 is only compatible with CR 9.1 (Bundle version which comes with VS), CR XI R1 and CR10.
VS 2005 is only compatible with CR 10.2 (Bundle version which comes with VS), CR XI R2 and CR 2008.
VS 2008 is only compatible with CR 10.5 (Bundle version which comes with VS) and CR 2008 SP0 and SP1
You can download platform supported guide from the following link which will help you to create compatible environment:
[https://websmp105.sap-ag.de/bosap-support]
or search for BusinessObjects note #1279888 - How to find supported platform guide for any platform?
Note can be searched from [here|https://www.sdn.sap.com/irj/sdn/businessobjects-notes]
Hope this helps
Regards,
Shweta

How can i show 2 videos at once imovie09?

How can i show 2 videos at once using imovie 09?

camro1050 wrote:
Yes I mean 2 video side by side. How do I do that in iMovie 11?
From iMovie Help:
To add a side-by-side clip:
Make sure Advanced Tools are turned on.
Open the project you want to add the side-by-side clip to so that it’s showing in the Project browser.
In the Event browser, select a video clip or a frame range that you want to use as a side-by-side clip, and then drag it over a clip in your project.When you see the green Add symbol, release the mouse button.
In the contextual menu that appears, choose “Side by Side.”In the Project browser, the side-by-side clip appears with a blue border around it above the video clip you added it to, at roughly the spot where you added it (toward the beginning, middle, or end of the clip).
Depending on the length of the side-by-side clip you added, it may extend beyond the clip you added it to (only if there’s another clip after the clip you added the side-by-side clip to). You can drag the split-screen clip so that it begins at a different point in the main clip. To reposition where the split-screen clip appears in the project, drag it to a different clip.
Play back the effect by placing the playhead (the red vertical line) anywhere before the side-by-side clip in the Project browser, and then pressing the Space bar.Press the Space bar again to stop playback.
John

How can I save my images like a "wedding photographer" does?

I have a Pixma PRO-100. . . with a Windows 8.1 PC. . . and printing through Adobe Photoshop Elements 11.
I just printed some wedding pictures of my daughter - which I got from the "wedding photographer"... when I printed them - they were an exact match to what I saw on my screen (which I've calibrated)... and dead on crisp, great quality.
I'm wondering what a wedding photographer does to their images to make them so "solid" in printing. How do they save them?
when I print something from a my files, (Raw, NEF, or JPEG's) - there always seems to be a color or quality problem? Never a match. It takes several adjustments and print samples before I get what I want.
Is the ICC Profile a problem - or How can I save my images like a wedding photog does? So they print exact?
Joe B

" ... (Raw, NEF, or JPEG's) ... "
I suspect there are some minor differences you are not seeing and/or noticing on screen. But right off, no real wedding photographer will shoot in anything except RAW. You should be using RAW, only, too. The RAW file to start with has way more info in it than any jpeg does.
Next I would bet your wedding photographer does some tweaking to highlights and shadows, plus s ome other stuff that you are not. In other words he is getting the photos ready for printing. Remember printing on paper and "printing for on screen" is two different things.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

How can I show my scanner in Photoshop import menu?

How can I show my scanner in Photoshop import menu?

Does it not appear when you go to Import > Images from Device? Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

How can I show an image before my animation starts playing

Similar Messages

Maybe you are looking for