How can I show code here?

Hello,
Im new on this board. First off all:
How can I show java code here (eg. by tag)?
Thanks

click the code button on the dialog then past your code between the tags.

Similar Messages

  • How can we show data in rows when it is in Columns........

    I have strucked with a simple but a complex problem.
    I have a Report with data in vertical rows..need of the hour is how can we show that data into column structure.
    here is the table sample which i have in Database..
    Location      chrg_type    Effective_date
    xxxxxxx        xxxx          xx-xx
    thhis is the structure in effective date we have several months in it in a single column i want show the effective date or effective month in various columns instead of a single column.
    my required table is....
                                Effective_date     Effective_date
    Location      chrg_type     xx-xx              xx-xx
    xxxxxxx        xxxx          xx-xx
    any tough heads?????

    Hi Sunil,
    Your 1st problem is that you are going to need one more field to accomplish you goal. What type of data do want under your new date columns?
    Anyway, once you have that you need to move on to how to move the data out into columns based on date.
    Try something like this.
    0_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',CurrentDate) AND
    DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',CurrentDate)
    THEN {tbl.DataField}
    1_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -1, CurrentDate)) AND
    DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -1, CurrentDate))
    THEN {tbl.DataField}
    2_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -2, CurrentDate)) AND
    DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -2, CurrentDate))
    THEN {tbl.DataField}
    ... Repeat this process until you have all of the columns you need, following this format.
    Hope this works for you,
    Jason

  • How can I show text sentence on XY graph

    Hello,,,, anyone knows??? How can I show text sentence on XY graph?
    I just know that the only numeric data type can be the input data but my case I have both the number and message to show on the same graph.
    Thanks in advance
    Mannie

    You start out with an array of zero size. Since replace array subset does not change the size of an array, you stay with zero annotations. If nothing is there, you cannot replace it.
    Possible solutions:
    (A) Instead of reading the current annotation list (which is zero!), you could initialize the shift register with a diagram constant (right-click...create constant), expand it to the desired number of elements and make them all e.g. with a blank text.
    (B) Alternatively, you can manually create the desired number of annotation by right-clicking on the graph and select "data operations...create annotations". Now you start of with an array of the correct size if you read the annotation list with a property node and you can replace them programmatically with new annotations as desired.
    (C) You can also initialize the shift register with an empty array, then use built array to add annotations.
    LabVIEW Champion . Do more with less code and in less time .

  • How can I show the chart in forms?

    Dear all:
    I want to create a line chart. I use the chart wizard and it is successful to create the chart. But, it can't show the chart when I run the form. How can I show the chart in form6i?
    Besides, I see a document that refer to 'OG.pll'.
    I can't find the OG.pll in form6i. Do I need 'OG.pll' to show the chart when I run the form? Thank you very much!!

    Hi Carlos,
    You can try to create a code node for check which signature to print.
    In global variable declare a variable ie named g_sign type TDOBNAME.
    Then pass this var to name of graphics &g_sign&
    please check and reply.
    regards,

  • How can i show a form Screen Short

    How can i show a Screen Short on Oracle Forms threads.
    i mean i want to send a visuable form error on the forms plz help me. print screen does not work here.

    Hello,
    use the img html balises. in the following example, replace ( by < and ) by >
    (img src="the_source_name_of_your_image")
    Francois

  • How can I show vertical text?

    Hi all, does any body knows how can I show a vertical text using g2.drawString() method?
    For example:
    g2.drawString("Help", x, y);
    I want the text appear like:
    p
    l
    e
    H
    of course with the correct rotation of each character.
    thanks in advance

    Here's the code we use in the JFreeChart project:
         * A utility method for drawing rotated text.
         * <P>
         * A common rotation is -Math.PI/2 which draws text 'vertically' (with the top of the
         * characters on the left).
         * @param text  the text.
         * @param g2  the graphics device.
         * @param x  the x-coordinate.
         * @param y  the y-coordinate.
         * @param rotation  the clockwise rotation (in radians).
        public static void drawRotatedString(String text, Graphics2D g2,
                                             float x, float y, double rotation) {
            if ((text == null) || (text.equals(""))) {
                return;
            AffineTransform saved = g2.getTransform();
            // apply the rotation...
            AffineTransform rotate = AffineTransform.getRotateInstance(rotation, x, y);
            g2.transform(rotate);
            // workaround for JDC bug ID 4312117 and others...
            TextLayout tl = new TextLayout(text, g2.getFont(), g2.getFontRenderContext());
            tl.draw(g2, x, y);
            // replaces this code...
            //g2.drawString(text, x, y);
            g2.setTransform(saved);
        }That bug workaround is causing trouble in some JDKs, try the original code and see if it works for you.
    Regards,
    Dave Gilbert
    www.jfree.org

  • How can I show my scanner in Photoshop import menu?

    How can I show my scanner in Photoshop import menu?

    Does it not appear when you go to Import > Images from Device?  Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

  • How can I show additional tab rows when using many open tabs?

    How can I show additional tab rows when using many open tabs?

    What method (code) did you use to get the Tab bar displaying in the space used for the Navigation Toolbar (location bar)?
    The Tab bar should be displayed above the Navigation Toolbar.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How can I show message from server?

    Has anyone idea, how can I show message from server? I want to show message after some files are uploaded via FTP.

    Hi,
    You can use OPEN DATASET for this purpose.
    Try this code:
    <b>****************************************</b>
    Data:
    A_FILE TYPE RLGRAP-FILENAME,   "Application server
    P_FILE TYPE RLGRAP-FILENAME.   "Presentation server
    DATA: BEGIN OF ITAB OCCURS 0,
    LINE TYPE STRING,
    END OF ITAB.
    DATA: FILENAME TYPE STRING.
    FILENAME = P_FILE.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                = FILENAME
      TABLES
        DATA_TAB                = ITAB[]
      EXCEPTIONS
        FILE_OPEN_ERROR         = 1
        FILE_READ_ERROR         = 2
        NO_BATCH                = 3
        GUI_REFUSE_FILETRANSFER = 4
        INVALID_TYPE            = 5
        NO_AUTHORITY            = 6
        UNKNOWN_ERROR           = 7
        BAD_DATA_FORMAT         = 8
        HEADER_NOT_ALLOWED      = 9
        SEPARATOR_NOT_ALLOWED   = 10
        HEADER_TOO_LONG         = 11
        UNKNOWN_DP_ERROR        = 12
        ACCESS_DENIED           = 13
        DP_OUT_OF_MEMORY        = 14
        DISK_FULL               = 15
        DP_TIMEOUT              = 16
        OTHERS                  = 17.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    OPEN DATASET A_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    LOOP AT ITAB.
      TRANSFER ITAB-LINE TO A_FILE.
    ENDLOOP.
    <b>*****************************************</b>
    Hope this helps,
    Regards,
    Pragya

  • How can i show a value into a MessageStyledText

    Dear all,
    Suppose i have a value in a variable i.e. number=10;
    how can i show this value into a MessageStyleText when page loads.
    please suggest.

    Gyan wrote:
    Mofizur,
    Get the value from the variable & Use the below code in PR.
    OAMessageStyledTextBean processCodeBean = (OAMessageStyledTextBean)webBean.findChildRecursive("<Replace with Bean Id>");
    if(processCodeBean!=null)
    processCodeBean.setText(pageContext,null);
    }Regards,
    GyanString employeeNumber = "10";
    processCodeBean.setText(pageContext,employeeNumber);
    OR
    processCodeBean.setValue(pageContext,employeeNumber);
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Forms 6.0-- How can I show records in a block in different colours.

    In a multi record block, how can I show few records in one colour and few more in a different colour depending on a condition.

    Use DISPLAY_ITEM.
    This will change the visual attribute of the item in the current(!) record,
    set_item_property changes the attributes of the item in all(!) records.

  • HOw can i show a table(name given in parameters) in a report program

    I made a report in which there is a paremeter asking for a table name ....
    PARAMETERS TBLLE_NAME(10) OBLIGATORY.
    Now when I enter the table namke then how can i show its values....
    HINT:- We have to use fiels symbols....AND THE USER CAN ENTER ANY DDIC TABLE NAME having some records ...........

    You can display the contents of the DB table inputted using ALV.
    Pass the Structure name as the DB table name inputted.
    Use CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE to create the dynamic table of the same structure as the DB table passed.
    Once the above steps are done, the internal table with data can be displayed using ALV.
    Reward points for all helpful answers.
    Thanks,
    Balaji

  • How can I show album art in the mini player when playing songs from a plugged in iPhone?

    How can I show album art in the mini player when playing songs from a plugged in iPhone?
    When I play from my phone and switch to the mini player it's always showing the music notes in the thumbnaill. It'd be nice if it could get album art off of the phone.
    I'm on iTunes version 11.0.4.4

    He @mracole,
    it is very nice that you post a solution to complete the library with artwork for album's that do not have an artwork. Your solution perfectly addresses the problem for assigning artwork, BUT this thread is about CHANGING artwork for albums already uploaded into iTunes Match. Just try to replace for example a blue artwork cover for an album with a red one. If you made it in a simple way (without deleting the album from iTunes Match and local changes on the files with an external ID3-Application or 2 or more iTunes libraries on different Mac's) this is the right place to give a solution. I really tried for hours to change the artwork to make them visible in landscape cover flow mode on my iPhone5. In rare cases I made it, but then the covers sometimes where restored to the old onces - exacly how it is mentioned by Starhawk
    As long as there is no simple way to change the cover of an iTunes Match stored album (you can change title, artist and so on without hitting "update iTunes Match" over all distributed Library on different devices - this date will be synchronized almost instantly) I considered the behaviour from iTunes as BUGGY! For me the local artwork cache (and if there is any iCloud artwork cache - I don't know) do not interfere with iCloud. Even when I delete the whole local cache (album artwork music - everything) I do not manage to change the artwork.
    Regards from Munich, Germany

  • How can i show Bcc in my outgoing emails for Mac Lion 10.7.2

    How can i show Bcc in my outgoing email for Mac Lion 10.7.2  Bcc does not highlite in View.
    Noomee

    Reset the SMC: http://support.apple.com/kb/ht3964
    Should fix just this sort of thing.

  • How can I show a 0% range in the data value label on a bar chart thanks?

    How can I show a 0% range in the data value label on a bar chart thanks?

    I'm not sure what the question is. 
    I know that if you have a bar chart and one of the categories (X-axis) has bar (Y value) equal to 0%, no bar is plotted for that category. Even the addition of a stroke (line) around the bars doesn't make one appear for 0%.  The only automatic way I know of to make it look like there is data in that category is to add the value labels to the bars. Inspector/Chart/Series, select one of the bars on the chart, click on "value labels". Another method that is a workaround is to fudge the number a little in your table so that instead of 0% it is a very small %.  This will get you a thin line on the chart.
    But if your question is about the value labels (the numbers that display on or in the bars) and you are not getting one for a bar that is supposed to be 0%, it probably means your table doesn't actually have a 0% in the corresponding cell. A blank cell in the table will not get a value label.

Maybe you are looking for