How can I show results in another key figure?

Hi everybody,
I am using BEx Analyzer 3.5 and there I have a key figure with the following entries in a table:
40
50
60
Now I want another keyficture next to the first one which shows me the result of the first one:
40 | 150
50 | 150
60 | 150
How is that possible in the query designer (formula) in BW 3.5?
Thanks everybody

Hi,
Thank you for your help! I tried it with two key values. But it worked just by one.
The other key value is the difference between two dates, for example 29 (29 days). It's not working with these key value. What can I do in this case? Should I can the value with the formular editor?
Thank you for helping me

Similar Messages

  • How can i display all the Coloumns (Key Figures) in the Report's same page

    Hi All,
    I am currently working on the BI 7.0 reporting. In the BEx Query Designer report, I am having 13 coloumns (7 Key figures and 6 Formulas) in the report. It is now displaying 10 coloumns in the First page of report. The other 3 coloumns can be seen by clicking on the next page. But the requirement is to see coloumns in the SAME PAGE.
    Are there any settings OR any other thing in the Query Designer, which can enable me to see all the coloumns on SAME page. The users are not interested in scrolling next page for 3 coloumns.
    Appreciates the Quick help/Response, please.
    Regards
    Ramana

    In Web Application Designer, for the properties of your analysis webitem under the Paging category, change parameter 'Number of Data Columns Displayed at Once' (BLOCK_COLUMNS_SIZE) to 0.  This will make all columns show instead of paginating as it is doing now.

  • How can I show a 0% range in the data value label on a bar chart thanks?

    How can I show a 0% range in the data value label on a bar chart thanks?

    I'm not sure what the question is. 
    I know that if you have a bar chart and one of the categories (X-axis) has bar (Y value) equal to 0%, no bar is plotted for that category. Even the addition of a stroke (line) around the bars doesn't make one appear for 0%.  The only automatic way I know of to make it look like there is data in that category is to add the value labels to the bars. Inspector/Chart/Series, select one of the bars on the chart, click on "value labels". Another method that is a workaround is to fudge the number a little in your table so that instead of 0% it is a very small %.  This will get you a thin line on the chart.
    But if your question is about the value labels (the numbers that display on or in the bars) and you are not getting one for a bar that is supposed to be 0%, it probably means your table doesn't actually have a 0% in the corresponding cell. A blank cell in the table will not get a value label.

  • How can i copy songs from another library to my itunes library with homesharing?

    How can i copy songs from another library to my itunes library with homesharing?  I see the other libraries, but cannot drag the songs into my library.  The help window says to use the "show menu" at the bottom, but I don't have that menu with itunes 11.

    You can do this in 2 ways.
    1) You can enable the sidebar and you can drag and drop like you used to be able to.  To turn on Sidebar in iTunes 11, go to View > Show Sidebar
    2) Another way is to connect to your Home Share from the drop-down menu from the left (where it says Music) and select your Home Share.  Once you are connected to your Home Share, select Music and you should see a button that says "All Items" and on the right, you should see the Import button.  To copy, select the songs you want to import and then click on Import.

  • How can i show 2 videos at once imovie09?

    How can i show 2 videos at once using imovie 09?

    camro1050 wrote:
    Yes I mean 2 video side by side. How do I do that in iMovie 11?
    From iMovie Help:
    To add a side-by-side clip:
    Make sure Advanced Tools are turned on.
    Open the project you want to add the side-by-side clip to so that it’s showing in the Project browser.
    In the Event browser, select a video clip or a frame range that you want to use as a side-by-side clip, and then drag it over a clip in your project.When you see the green Add symbol, release the mouse button.
    In the contextual menu that appears, choose “Side by Side.”In the Project browser, the side-by-side clip appears with a blue border around it above the video clip you added it to, at roughly the spot where you added it (toward the beginning, middle, or end of the clip).
    Depending on the length of the side-by-side clip you added, it may extend beyond the clip you added it to (only if there’s another clip after the clip you added the side-by-side clip to). You can drag the split-screen clip so that it begins at a different point in the main clip. To reposition where the split-screen clip appears in the project, drag it to a different clip.
    Play back the effect by placing the playhead (the red vertical line) anywhere before the side-by-side clip in the Project browser, and then pressing the Space bar.Press the Space bar again to stop playback.
    John

  • How can we generate result set report?

    how can we generate result set report ?means the out put of one query be the input of another query?how it is?

    Hi
    You have to use APD ( analysis process designer) to use results of one query as the input for the other queries.
    Check this link
    http://help.sap.com/saphelp_nw70/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
    Regards

  • How can we show selected values of a tree in a selectmanylistbox

    how can we show selected values of a tree in a selectmanylistbox??

    Hi,
    you can use a reference to a RichTree component instance and call  getSelectedRowKeys on it. The selected rowKey then allow you to look-uo the nodes in the tree. You can use a custom selection listener on the tree to be notified about each selection. There also is an API for the de-selected row keys, which you need to remove nodes from the select many list. The select many list will get its data from a managed bean in view scope (so the values survive subsequent requests)
    Frank

  • How can I arrange for the Enter key to just drop d...

    How can I arrange for the Enter key to just drop down a line instead of posting the message?

    In Skype go to Tools -> Options -> IM settings -> Show advanced options. In the section “Pressing Enter will” select the option: Insert line break.
    Note that this option is only available with Skype version newer than 6.1. The currently latest Skype version is 6.3.0.107.

  • How can i import contacts from another AIM account to this new one

    If you reference my last ichat question, you will see that I have had serious problems and had to create a new account.
    How can I import contacts from another AIM account to this new one??

    Hi,
    Use AIM for Mac and use the Export and Import features.
    Other than that it is a question on making sure every Single Buddy has more than just their Screen name in the IChat Address Card so it is added to the Address Book and dragging them back from there
    9:08 PM Thursday; February 7, 2008

  • How can we show data in rows when it is in Columns........

    I have strucked with a simple but a complex problem.
    I have a Report with data in vertical rows..need of the hour is how can we show that data into column structure.
    here is the table sample which i have in Database..
    Location      chrg_type    Effective_date
    xxxxxxx        xxxx          xx-xx
    thhis is the structure in effective date we have several months in it in a single column i want show the effective date or effective month in various columns instead of a single column.
    my required table is....
                                Effective_date     Effective_date
    Location      chrg_type     xx-xx              xx-xx
    xxxxxxx        xxxx          xx-xx
    any tough heads?????

    Hi Sunil,
    Your 1st problem is that you are going to need one more field to accomplish you goal. What type of data do want under your new date columns?
    Anyway, once you have that you need to move on to how to move the data out into columns based on date.
    Try something like this.
    0_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',CurrentDate) AND
    DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',CurrentDate)
    THEN {tbl.DataField}
    1_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -1, CurrentDate)) AND
    DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -1, CurrentDate))
    THEN {tbl.DataField}
    2_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -2, CurrentDate)) AND
    DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -2, CurrentDate))
    THEN {tbl.DataField}
    ... Repeat this process until you have all of the columns you need, following this format.
    Hope this works for you,
    Jason

  • How can I view the USMT recovery key in SQL report

    Hello all,
    Can anyone help me to provide sql query for below link… What I am looking is Just to create a report with all computers that has computer association any type with the recovery key information.
    http://www.windows-noob.com/forums/index.php?/topic/1763-how-can-i-view-the-usmt-recovery-key/
    I have tried below but not working so looking for help…..
    SELECT     TOP (100) PERCENT dbo.v_StateMigration.SourceName, dbo.v_StateMigration.SiteCode, dbo.v_StateMigration.SMPServerName, 
                          dbo.v_StateMigration.SourceMACAddresses, dbo.v_StateMigration.RestoreMACAddresses, dbo.StateMigration.StateEncryptDecryptKey, 
                          dbo.StateMigration.StorePath, dbo.StateMigration.StoreSize
    FROM         dbo.StateMigration INNER JOIN
                          dbo.v_StateMigration ON dbo.StateMigration.SMPServerName = dbo.v_StateMigration.SMPServerName CROSS JOIN
                          dbo.v_UserStateMigration
    WHERE     (dbo.StateMigration.StorePath IS NOT NULL) AND (dbo.StateMigration.StoreSize IS NOT NULL)
    ORDER BY dbo.v_StateMigration.SourceName

    Try this.
    SELECT Distinct
    SM.SourceName,
    SM.SiteCode,
    SM.SMPServerName,
    SM.SourceMACAddresses,
    SM.RestoreMACAddresses,
    SMT.StateEncryptDecryptKey,
    SM.StorePath,
    SM.StoreSize
    FROM
    dbo.v_StateMigration SM
    JOIN dbo.v_UserStateMigration UM on SM.RestoreClientResourceID= UM.RestoreClientResourceID
    join dbo.StateMigration SMT on SM.SMPServerName = SMT.SMPServerName
    WHERE
    (SM.StorePath IS NOT NULL)
    AND (SM.StoreSize IS NOT NULL)
    ORDER BY
    SM.SourceName
    http://www.enhansoft.com/

  • Forms 6.0-- How can I show records in a block in different colours.

    In a multi record block, how can I show few records in one colour and few more in a different colour depending on a condition.

    Use DISPLAY_ITEM.
    This will change the visual attribute of the item in the current(!) record,
    set_item_property changes the attributes of the item in all(!) records.

  • HT4994 MY IPHONE IS NOT A SIM FREE HOW CAN I USE IT IN ANOTHER COUNTRY?

    MY IPHONE IS NOT A SIM FREE HOW CAN I USE IT IN ANOTHER COUNTRY?

    Apple can do nothing. As Tim said, only the carrier to whom the iPhone is locked can authorize unlocking. You must contact that carrier.
    Regards.

  • How can I use Bluetooth with another devices?

    How can I use Bluetooth with another devices?

    You can set up your FaceTime account in Settings > FaceTime.

  • How can i get data from another database SQL Server use database link from

    I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?

    hi,
    u should see following documentation:
    Oracle9i Heterogeneous Connectivity Administrator's Guide
    Release 1 (9.0.1)
    Part Number A88789_01
    in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
    regards
    umar

Maybe you are looking for

  • Only one method appears at a time in Eclipse

    A wierd setting that I don't like has been changed in Eclipse and I do not know what it is or how to reset it. When I double click on a file in the Package Explorer, that file opens in the editor and displays the entire file. But then, when I click o

  • Sorry, There was a technical problem. Please try a...

    Here's the thing. 1. Goto ANY nokia regional website, and navigate to: Device software update \ Can I update? 2. Enter ANY legitimate Product code 3. Get the following message: "Sorry, There was a technical problem. Please try again soon." There are

  • Deleted a constraint but its still active???

    SQL> Insert into JOB_HISTORY (EMPLOYEE_ID,START_DATE,END_DATE,JOB_ID,DEPARTMENT_ID) values (115,to_date('18-MAY-95',..... Insert into JOB_HISTORY (EMPLOYEE_ID,START_DATE,END_DATE,JOB_ID,DEPARTMENT_ID) values (115,to_date('18-MAY-95','.... ERROR at li

  • Problem to update Swing components from RMI object at server side

    Greetings, I have a RMI client/server application, both client and server have a Swing GUI. But at the server side, it appears to me that I can't pass object or make function call to my server GUI class. Because I can't have GUI instance or reference

  • Comment désinstaller puis réinstaller Photoshop elements 10 sur le même ordinateur?

    Bonjour, j'ai perdu quelques fonctions de ce logiciel et souhaiterais le désinstaller puis le réinstaller sur le même ordinateur. Comment faire? Mon problème est que Photoshop Elements 10 n'apparaît plus dans la fenêtre "ouvrir avec" sous windows7.Y