How can I simplify very complex illustrator file, multiple embedded live traces

Hello!
If anyone has any advice on this I'd be very grateful! I have created a piece of artwork in illustrator which is to be printed 4x3m for a wall mural. Therefore the file I am working with must either be a vecor or a large enough raster to be printed at such as size. I have set it up at 1 to 10 so its currently A3ish size. Each component of the collage is a separate ai file and contains many points as they are all live traces. It was no problem linking in all these initially but I now need to embed them so as I can give the printers a complete file. I have succeeded embedding every image apart from one last complex one which is crashing the whole thing. Are there any settings I may be able to change to reduce the file size or simplify the graphic (whilst remaining vectors.) Below is the file with the linked images and also the outline of the embedded version so far. The problem I am having is basically because of the final output size required.
The only thing I can think of doing is opening each separate component and saving as a raster then relinking these - but will this be even more problematic for illustrator that thousands of vector points? I can do it in photoshop if needs be but as the final image is to be printed 4x3m will this be too large to handle? The ai file with all images linked was 25MB but now 500MB with the sky still to embed.
Thank you!

Rosie,
4x3m is quite large, and the comfortable/relevant viewing distance is so much larger than the one you use to read this that you should be bold here, bolder than just saying 150DPI which may be used at normal reading distance depending on printing method.
You may (literally) see it this way: the viewing angle is important: when you look at a larger image, you move back until you have a comfortable viewing angle, and at the same viewing angle, the viewing distance is proportional to the size. This means that you can determine how the actual final size in pixel x pixel looks under a certain viewing angle at normal reading distance.

Similar Messages

How can I open very old illustrator files in Illustrator CC?

I have archives of work files going back to Illustrator 1.1. Is there any way of opening these? At what point in the Illustrator development do legacy files become simpler to open? I have been working with Illustrator since 1987 so it's an important issue for me.

I guess ou have tried just opening the files?
Do the filenames have an extension?
If not, what happens if you just set it to .ai or .eps?

How can I make a CC Illustrator file open in CS6? Save as does not give an option to save as a CS6.

How can I make a CC Illustrator file open in CS6? Save as does not give an option to save as a CS6.

How can I print mulitple different .ai files onto one page in Illustrator CS6?

How can I print mulitple different .ai files onto one page in Illustrator CS6? I have all of the files organized by Arrange Documents>Tile All in Grid and I would like to print the files in this format so that they can all be seen at once when printed out onto one page.
Some background is that I have 16 different cad drawings that I have converted and edited in illustrator. I'd like to basically make a contact sheet with all 16 drawings so that they can be reviewed on one sheet of paper after printing. But each drawing is in it's own unique file, and I have not figured out how to put them all onto one page for printing.

You can place them (linked) into a new Illustrator file and print from there.
The original files will need pdf compatability.

How can I export an Adobe illustrator CC .AI file to a DWG or DXF file suitable for SolidWorks?

Hi
Can anyone help?
How can I export an Adobe illustrator CC .AI file to a DWG or DXF file, without SolidWorks enlarging the file & converting every curve into hundreds of short little straight lines rather than a single continuous line/s.
I have made sure the file is ungrouped or has any compound paths or colours.
Opening it in Autocad 2010 still converts the DWG file into hundreds of short little straight lines!
The file is needed to laser cut out an aluminium shape using SolidWorks 2008 (Metal soft)?
Formats they can handle are:
DWG, DXF, IGES, IGA
There must be a way to export it without re-drawing the whole design in Soildworks again!!??
Can anyone help?
INCA

Not really. This is a limitation you will have to live with. Unless you are extremely careful, most paths will be converted to polyline segments by AI and in particular in AI CC this is somehow busted, so it happens more often. You might have much more luck opening a native AI file in DraftSight or a 2D CAD program like TurboCAD and exporting a DWG or 2D IGES/ STEP file from there. The sizing issue is a different matter, but without knowing what units you actualyl used, nobody can advise.
Mylenium

How do I re-save an Illustrator file to an older version if I can't open the current file.

How do I re-save an Illustrator file back to an older version, if I can't open the file because I don't have the newer version it was created in (besides the obvious of purchasing the newer version).

Diamond DRP,
You may download a free trail of CS6 or CC.
CS6 is here,
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPHN
and CC is here,
http://www.adobe.com/downloads.html?promoid=JZEFS
You can use it for 30 days.

How can I use an old XMP file on a new set of images??

I have an older XMP file that contains settings used to retouch some previous images in a particular way. I'd like to apply those same settings to a new set of images. How can I use that older XMP file on a new set of images in Lightroom?
The contents of the XMP file are as follows:
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2-c020 1.124078, Tue Sep 11 2007 23:21:40
">
<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
<rdf:Description rdf:about=""
xmlns:crs="http://ns.adobe.com/camera-raw-settings/1.0/">
   <crs:Version>6.0</crs:Version>
   <crs:ProcessVersion>5.7</crs:ProcessVersion>
   <crs:WhiteBalance>Custom</crs:WhiteBalance>
   <crs:Temperature>4700</crs:Temperature>
   <crs:Tint>+4</crs:Tint>
   <crs:Exposure>-0.35</crs:Exposure>
   <crs:Shadows>5</crs:Shadows>
   <crs:Brightness>+50</crs:Brightness>
   <crs:Contrast>+25</crs:Contrast>
   <crs:Saturation>-8</crs:Saturation>
   <crs:Sharpness>25</crs:Sharpness>
   <crs:LuminanceSmoothing>0</crs:LuminanceSmoothing>
   <crs:ColorNoiseReduction>25</crs:ColorNoiseReduction>
   <crs:ChromaticAberrationR>0</crs:ChromaticAberrationR>
   <crs:ChromaticAberrationB>0</crs:ChromaticAberrationB>
   <crs:VignetteAmount>0</crs:VignetteAmount>
   <crs:ShadowTint>-1</crs:ShadowTint>
   <crs:RedHue>0</crs:RedHue>
   <crs:RedSaturation>0</crs:RedSaturation>
   <crs:GreenHue>0</crs:GreenHue>
   <crs:GreenSaturation>0</crs:GreenSaturation>
   <crs:BlueHue>0</crs:BlueHue>
   <crs:BlueSaturation>0</crs:BlueSaturation>
   <crs:FillLight>0</crs:FillLight>
   <crs:Vibrance>+5</crs:Vibrance>
   <crs:HighlightRecovery>24</crs:HighlightRecovery>
   <crs:Clarity>+8</crs:Clarity>
   <crs:Defringe>0</crs:Defringe>
   <crs:HueAdjustmentRed>0</crs:HueAdjustmentRed>
   <crs:HueAdjustmentOrange>0</crs:HueAdjustmentOrange>
   <crs:HueAdjustmentYellow>0</crs:HueAdjustmentYellow>
   <crs:HueAdjustmentGreen>0</crs:HueAdjustmentGreen>
   <crs:HueAdjustmentAqua>0</crs:HueAdjustmentAqua>
   <crs:HueAdjustmentBlue>0</crs:HueAdjustmentBlue>
   <crs:HueAdjustmentPurple>0</crs:HueAdjustmentPurple>
   <crs:HueAdjustmentMagenta>0</crs:HueAdjustmentMagenta>
   <crs:SaturationAdjustmentRed>0</crs:SaturationAdjustmentRed>
   <crs:SaturationAdjustmentOrange>0</crs:SaturationAdjustmentOrange>
   <crs:SaturationAdjustmentYellow>0</crs:SaturationAdjustmentYellow>
   <crs:SaturationAdjustmentGreen>0</crs:SaturationAdjustmentGreen>
   <crs:SaturationAdjustmentAqua>0</crs:SaturationAdjustmentAqua>
   <crs:SaturationAdjustmentBlue>0</crs:SaturationAdjustmentBlue>
   <crs:SaturationAdjustmentPurple>0</crs:SaturationAdjustmentPurple>
   <crs:SaturationAdjustmentMagenta>0</crs:SaturationAdjustmentMagenta>
   <crs:LuminanceAdjustmentRed>0</crs:LuminanceAdjustmentRed>
   <crs:LuminanceAdjustmentOrange>0</crs:LuminanceAdjustmentOrange>
   <crs:LuminanceAdjustmentYellow>0</crs:LuminanceAdjustmentYellow>
   <crs:LuminanceAdjustmentGreen>0</crs:LuminanceAdjustmentGreen>
   <crs:LuminanceAdjustmentAqua>0</crs:LuminanceAdjustmentAqua>
   <crs:LuminanceAdjustmentBlue>0</crs:LuminanceAdjustmentBlue>
   <crs:LuminanceAdjustmentPurple>0</crs:LuminanceAdjustmentPurple>
   <crs:LuminanceAdjustmentMagenta>0</crs:LuminanceAdjustmentMagenta>
   <crs:SplitToningShadowHue>138</crs:SplitToningShadowHue>
   <crs:SplitToningShadowSaturation>13</crs:SplitToningShadowSaturation>
   <crs:SplitToningHighlightHue>0</crs:SplitToningHighlightHue>
   <crs:SplitToningHighlightSaturation>0</crs:SplitToningHighlightSaturation>
   <crs:SplitToningBalance>0</crs:SplitToningBalance>
   <crs:ParametricShadows>0</crs:ParametricShadows>
   <crs:ParametricDarks>0</crs:ParametricDarks>
   <crs:ParametricLights>0</crs:ParametricLights>
   <crs:ParametricHighlights>0</crs:ParametricHighlights>
   <crs:ParametricShadowSplit>25</crs:ParametricShadowSplit>
   <crs:ParametricMidtoneSplit>50</crs:ParametricMidtoneSplit>
   <crs:ParametricHighlightSplit>75</crs:ParametricHighlightSplit>
   <crs:SharpenRadius>+1.0</crs:SharpenRadius>
   <crs:SharpenDetail>25</crs:SharpenDetail>
   <crs:SharpenEdgeMasking>0</crs:SharpenEdgeMasking>
   <crs:PostCropVignetteAmount>0</crs:PostCropVignetteAmount>
   <crs:GrainAmount>0</crs:GrainAmount>
   <crs:ColorNoiseReductionDetail>50</crs:ColorNoiseReductionDetail>
   <crs:ConvertToGrayscale>False</crs:ConvertToGrayscale>
   <crs:ToneCurveName>Medium Contrast</crs:ToneCurveName>
   <crs:ToneCurve>
<rdf:Seq>
<rdf:li>0, 0</rdf:li>
<rdf:li>32, 22</rdf:li>
<rdf:li>64, 56</rdf:li>
<rdf:li>128, 128</rdf:li>
<rdf:li>192, 196</rdf:li>
<rdf:li>255, 255</rdf:li>
</rdf:Seq>
   </crs:ToneCurve>
   <crs:CameraProfile>Adobe Standard</crs:CameraProfile>
   <crs:CameraProfileDigest>3DA8CE4A626CE36A1D0C55BF157793C9</crs:CameraProfileDigest>
   <crs:HasSettings>True</crs:HasSettings>
</rdf:Description>
</rdf:RDF>
</x:xmpmeta>

I’m pretty sure Adobe NEVER intended for someone to copy an XMP file from one photo to another outside of LR as a way to replicate settings.   You can make a preset from a photo, as discussed, or if you don’t want to do that, copy-paste the settings from a representative photo that you initially select to one or more new photos. You could have a special LR folder that holds standard photos to copy/paste from. Of course creating a Develop preset from the representative photo is the “normal” way to handle such situations, but maybe you have hundreds of different situations to copy settings from and don’t want to create presets for each one, but I’d argue that you could create a complex folder hierarchy for your presets and still have them findable without that much problem.
As far as the mystery about why some photos show Reset and some show From Metadata, is the Process Version (down in Camera Calibration) of the photo before reading the settings the same between the two situations? And in general, are these virgin photos newly imported into LR or have some been modified in LR, already? Does an XMP file already exist for any of these, where that XMP is being overwritten by your external-to-LR copying? Or do you have auto-write-XMP enabled and your hand-copied XMP is getting overwritten by LR, automatically, before you have a chance to read in anything?

URGENT PLEASE:How can I run a a class file on the Apache server?

Hi Guys and Gurus,
I am seeking some favor all of experienced gurus, i.e.
How can I run a a class file on the Apache server? Can I run through an Applet?
How can I set Environment variables in Windows2000 Professional Environment?
Actually, I want to extract some records from a MySQL Database running on Apache Server. I wrote a program just to select the columns and show them. It is now a Class file, Now how can I run this class file from the Server???
The code is here
import java.sql.*;
public class RecordShow {
public static void main(String args[]) {
String url = "jdbc:mysql://localhost/myhost";
Connection con;
String query = "select mytable.column," +
"from mytable " +
"where mytable.column = 1";
Statement stmt;
try {
Class.forName("com.mysql.jdbc.Driver");
} catch(java.lang.ClassNotFoundException e) {
System.err.print("ClassNotFoundException: ");
System.err.println(e.getMessage());
try {
con = DriverManager.getConnection(url,
"myuser", "mypassword");
stmt = con.createStatement();
ResultSet rs = stmt.executeQuery(query);
ResultSetMetaData rsmd = rs.getMetaData();
int numberOfColumns = rsmd.getColumnCount();
int rowCount = 1;
while (rs.next()) {
System.out.println("Row " + rowCount + ": ");
for (int i = 1; i <= numberOfColumns; i++) {
System.out.print(" Column " + i + ": ");
System.out.println(rs.getString(i));
System.out.println("");
rowCount++;
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.print("SQLException: ");
System.err.println(ex.getMessage());
Please advise... THANKS
VJ

Ehm, I wasn't referring to you at all... read up,
there's a comment by jschell saying that CGI might be
easier/better for his purposes.
Yep.
I know PHP/Perl/whatever might be easier for some
purposes, but only if you happen to know them and want
to/are able to use them. Ok. But you aren't the one asking the question are you. And the person who asked the question seems to have absolutely no familiarity with Apache or applets.
So whatever they do they are going to have to learn a lot.
And that does indeed suggest that in all likelyhood they have not investigated the alternatives.
And for the vast majority of internet applications, especially with smaller projects (obvious this person is not working with a large team), using perl, or something besides java, is going to be the best business solution. It is simpler, and more secure (probably due to the fact that it is simpler.)
Since this is a Java forum, I
answer under the assumption that people have made a
choice one way or another to use a Java solution to
their problem, so I try to solve it in Java first, and
only when that fails (very seldom) do I turn to other
solutions.You approach problems by arbritrarily deciding to try to solve it in java first and only if you fail do you then look to other solutions?
My first step is to try to figure out which of the various avenues is going to cost less. (And a secondary, but non-trivial concern, is then to convince the customer that just because they have heard of a buzz word like 'enterprise bean' that it doesn't mean that is a cost effective solution.) We must come from different worlds.

How can I e-mail a PDF file?...popups go around in circles

How can I e-mail a PDF file? Popups keep going around in circles.

No. You can set an option in an outgoing mail message to have a receipt confirmation sent to you, but the recipient can decline to send that receipt. (Spammers would be very happy if their junk would automatically acknowledge which are actually live email accounts.)

How can I tell if someone copied files off of my G4?

I left my G4 unlocked because itunes was running for the stereo, I walked in to my office on someone acting funny. How can I determine if he copied files off of my Dual G4 onto a usb thumb drive, CD or DVD... Can I simply check an activity log, console or terminal?? All I need to know is if someone did anything which my system other then listen to itunes during a three hour window. Thanks in advance

You need to look at your system log in Console utility. Open Console in the /Applications/Utilities folder (cmd-shift-U will get you there right away), which will open with the console.log file. Click the Logs icon to reveal the other log files available, and you should find system.log right under console.log. Click system.log.
Now, in the filter window in the upper right corner of the window, type diskarbitration to filter. That will tell you if any thumb drive was connected, at least. This is the kind of thing you should find, maybe. The time stamp is important.
You may need to go back several swapped system.log versions, to be sure, so you need to then reveal the log files and folders under /var/log by clicking the triangle, then go down that list until you see eight files named system.log.0.gz through system.log.7.gz. Click each in turn and if they are not very short, filter again on diskarbitration.
Now, if you find something suspicious, you need to preserve the specific log file, as it will be rotated out by the daily maintenance. Bring up the Go to Folder dialog from Finder by the keyboard shortcut of cmd-shift-G, and type in /var/log as the name of the folder. This will bring up a folder with the log files of interest, which is normally an invisible folder. Select the log file you want to protect and duplicate it using cmd-D. Then move that duplicate to someplace safe.
You may also find CD burn information in the diskrecording.log file as well.
Message was edited by: old comm guy to add the last log file to look for.

How can i make sure the graphic file from my subcontract create is really llegal?

how can i make sure the graphic file from my subcontract create is really llegal?
They have creat the PNG file which creat from Adobe Illustrator CS5.
I have try checking on Metadata In Adobe Bridge, and it seem to be blank.
So i would likt to know how can i make sure the graphic file from my subcontract create is really llegal?
Thanks

I have try checking on Metadata In Adobe Bridge, and it seem to be blank.
So i would likt to know how can i make sure the graphic file from my subcontract create is really llegal?
shoo: if i had to do that for every file i get i would go insane, as scott said, post contract: files that they (sub contractor) supply you, presume them ok unless you KNOW otherwise, or a copyright flag pops up contradicting ownership.
G

How can I get rid of other files on my mac ?

how can I get rid of other files on my mac ?

Hope this helps.
1. Empty Trash.
    http://support.apple.com/kb/PH10677
2. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
3. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
4. For more on this and very helpful tips:
    http://pondini.org/OSX/DiskSpace.html
    http://pondini.org/OSX/LionStorage.html
5. Disk space / Time Machine ?/ Local Snapshots
   http://support.apple.com/kb/ht4878
6 Re-index Macintosh HD
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409

How can I group fetched Adobe Ideas files into projects?

How can I group fetched Adobe Ideas files into projects? The overview tutorial did not warn to organize your files prior to the one time fetch option. In Draw FAQs it is stated that drawings can be organized into projects. However, I am unable to determine how. If anyone has insight, please advise. I have so many ideas files that navigating Illustrator Draw is difficult.

If you go to the Overview page, there is a thread about importing from Ideas. It says:
"To organize your files prior to importing into Draw, you can put them in folders in Creative Cloud or on your desktop. Individual Ideas files imported to Draw will come in as single-page projects. Each folder containing Ideas files will be imported as a Draw project containing the imported Ideas files."
Not sure if you can put individual drawings into Projects together on the device, but would be interested to hear if you come up with a solution.

How can I make a small swf file out of InDesign

I have a 200 page book (PDF). I am trying to make a flip book to preview in web browser. How can I make a small swf file out of InDesign with the PDF I have?

There is another point:
if you are using JPEG images together with SWF as output file format, you could get smaller images by:
1. using the Export For Web menu for generating size optimized JPEGs in PhotoShop opposed to Save As JPEG
2. stripping all color management (ICC) information off the files (SWF is not very good in color management besides sRGB, I think…)
Uwe

How can I make this complex query?

I donât know how can I do this complex query...
I have the tables Customers, Vehicles and Models. A customer can have 0-N Vehicles and a vehicle have 1 Model.
Customers: ID_Customer (PK), Name, LastName...
Vehicles: ID_Vehicle (PK), ID_Customer, ID_Model, date_sale
Models: ID_Modelo (PK), Model_Name
Then I need to know the buy average time (date_sale) between 2 models (ID_Model)
For example I have these Vehicles:
ID_Vehicle (PK)...ID_Customer...ID_Model....date_sale
1................................123....................1.............21/05/2000
2................................459....................3............ 16/08/2000
3................................123....................2............ 28/06/2001
4................................516....................1............ 09/09/2001
5................................459....................4............ 18/10/2002
6................................516....................2............ 20/12/2002
If I want to know the buy average time (date_sale) between ID_Model 1 and ID_Model 2 it is. (403 + 467) / 2 = 435 days !!!
* Customer 123 (model 1 to 2): 25/06/2001 â 21/05/2000 ==> 403 days
* Customer 516 (model 1 to 2): 01/12/2002 â 01/05/2000 ==> 467 days.
I need to do the query for all the combination models. For example If I have the Models 1, 2 and 3 I need to obtain:
Source_Model.....Target_Model....Buy_Average_Time
1......................................1....................... xxx days
1......................................2....................... xxx days
1......................................3....................... xxx days
2......................................1....................... xxx days
2......................................2....................... xxx days
2......................................3....................... xxx days
3......................................1....................... xxx days
3......................................2....................... xxx days
3......................................3....................... xxx days
If it is necessary I could create a table with the fields Source_Model, Target_Model and Buy_Average_Time for accelerate the query time response.
But how can I do this query??????????
Thanks very much!!!

Hi,
Thanks for your reply but It is not correct for me because the Customer could have several vehicles in her life.
If I make the query with my examples data it is OK
ID_Vehicle (PK)...ID_Customer...ID_Model....date_sale
1................................123....................1.............21/05/2000
2................................459....................3............ 16/08/2000
3................................123....................2............ 28/06/2001
4................................516....................1............ 09/09/2001
5................................459....................4............ 18/10/2002
6................................516....................2............ 20/12/2002
select v1.id_model as source_model,
v2.id_model as target_model,
avg (v2.date_sale - v1.date_sale) || ' days' as buy_average_time
from vehicles v1,
vehicles v2
where v1.id_customer = v2.id_customer
and v2.date_sale > v1.date_sale
group by v1.id_model, v2.id_model;
I received:
SOURCE_MODEL     TARGET_MODEL     BUY_AVERAGE_TIME
..............1................................2.....................................435 days
..............3................................4.....................................793 days
But If I insert a new vehicle:
ID_Vehicle (PK)...ID_Customer...ID_Model....date_sale
7................................516....................3............ 16/08/2003
And I execute the query now I receive:
SOURCE_MODEL     TARGET_MODEL     BUY_AVERAGE_TIME
..............1................................2...........................435 days
..............1................................3...........................706 days
..............2................................3...........................239 days
..............3................................4...........................793 days
It is NO correct because I donât have the 1 (Source_model) to 3 (Target_model) combination in the Vehicles data!!! (I have 1 to 2 and 2 to 3 but NO 1 to 3!!!!).
Then the query is not OK for me!
Besides If I modify the Vehicle 7 data and put ID_Model = 2:
ID_Vehicle (PK)...ID_Customer...ID_Model....date_sale
7................................516....................2............ 16/08/2003
I received:
SOURCE_MODEL     TARGET_MODEL     BUY_AVERAGE_TIME
..............1................................2...........................525,33 days
..............2................................2...........................239 days
..............3................................4...........................793 days
It is NO correct because the BUY_AVERAGE_TIME for 1 to 2 combination is 435 days (the same of the original query) because I aggregate only the combination 2 to 2 with the ID_VEHICLE 7
Below I attach the examples scripts.
Could you help me with this query, please?
Thanks very much!
CREATE TABLE VEHICLES
ID_VEHICLE NUMBER(9),
ID_CUSTOMER NUMBER(9),
ID_MODEL NUMBER(9),
DATE_SALE DATE
TABLESPACE USERS
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCACHE
NOPARALLEL;
INSERT INTO VEHICLES ( ID_VEHICLE, ID_CUSTOMER, ID_MODEL, DATE_SALE ) VALUES (
1, 123, 1, TO_Date( '05/21/2000 12:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM'));
INSERT INTO VEHICLES ( ID_VEHICLE, ID_CUSTOMER, ID_MODEL, DATE_SALE ) VALUES (
2, 459, 3, TO_Date( '08/16/2000 12:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM'));
INSERT INTO VEHICLES ( ID_VEHICLE, ID_CUSTOMER, ID_MODEL, DATE_SALE ) VALUES (
3, 123, 2, TO_Date( '06/28/2001 12:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM'));
INSERT INTO VEHICLES ( ID_VEHICLE, ID_CUSTOMER, ID_MODEL, DATE_SALE ) VALUES (
4, 516, 1, TO_Date( '09/09/2001 12:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM'));
INSERT INTO VEHICLES ( ID_VEHICLE, ID_CUSTOMER, ID_MODEL, DATE_SALE ) VALUES (
5, 459, 4, TO_Date( '10/18/2002 12:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM'));
INSERT INTO VEHICLES ( ID_VEHICLE, ID_CUSTOMER, ID_MODEL, DATE_SALE ) VALUES (
6, 516, 2, TO_Date( '12/20/2002 12:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM'));
INSERT INTO VEHICLES ( ID_VEHICLE, ID_CUSTOMER, ID_MODEL, DATE_SALE ) VALUES (
7, 516, 2, TO_Date( '08/16/2003 12:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM'));
COMMIT;
CREATE TABLE MODELS
ID_MODELO NUMBER(9),
MODEL_NAME VARCHAR2(25 BYTE)
TABLESPACE USERS
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCACHE
NOPARALLEL;
INSERT INTO MODELS ( ID_MODELO, MODEL_NAME ) VALUES (
1, 'MODEL 1');
INSERT INTO MODELS ( ID_MODELO, MODEL_NAME ) VALUES (
2, 'MODEL 2');
INSERT INTO MODELS ( ID_MODELO, MODEL_NAME ) VALUES (
3, 'MODEL 3');
INSERT INTO MODELS ( ID_MODELO, MODEL_NAME ) VALUES (
4, 'MODEL 4');
COMMIT;
CREATE TABLE CUSTOMERS
ID_CUSTOMER NUMBER(9),
NAME VARCHAR2(25 BYTE),
LASTNAME VARCHAR2(25 BYTE)
TABLESPACE USERS
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCACHE
NOPARALLEL;
INSERT INTO CUSTOMERS ( ID_CUSTOMER, NAME, LASTNAME ) VALUES (
123, 'Customer 123', 'A');
INSERT INTO CUSTOMERS ( ID_CUSTOMER, NAME, LASTNAME ) VALUES (
459, 'Customer 459', 'B');
INSERT INTO CUSTOMERS ( ID_CUSTOMER, NAME, LASTNAME ) VALUES (
516, 'Customer 516', 'C');
INSERT INTO CUSTOMERS ( ID_CUSTOMER, NAME, LASTNAME ) VALUES (
318, 'Customer 318', 'D');
COMMIT;

How can I simplify very complex illustrator file, multiple embedded live traces

Similar Messages

Maybe you are looking for