How can I simulate a scope display where the vertical time grid does not scroll?

The "Variable-Time Chart XY.vi" example is very close but I would like to use the timing and "Y" data from a DAQ MX read. The data is being generated continuously at 1000 samples/second and I am reading it as a waveform. I am new to Lab View and do not know how to integrate the waveform data with the Variable-Time Chart XY.vi . Any help would be appreciated.
Thanks,
Kris

Hi Kris,
You could use the "Get Waveform Components" function to get the Y data values of the waveform and then either graph the data for the current time like the example shows or use t0 and dt to graph the data as it is coming in.
Regards,
Andrew
National Instruments
RIO Embedded Hardware PSE
CompactRIO Developers Guide

Similar Messages

I have 2 iPhone 4s currently. On one of them the cameria icon shows in the botom left corner of the screen in the lessaging app but not on the other device. How can I get it to display on the one that it does not show up? I have tried everything I can

I currently have 2 Iphone 4 s. Both are unlocked vervion from Apple. In the messaging app the camera icon shows but it does not show on the other. How can I get it to chow on both devices? Thanks in advance for your help.
Chet [email protected]

So after looking a bit closer i have noticed that when i have the phone plugged into the computer it shows the songs but when i dont have it plugged in and i go so the song icon on the bottom of the music menu screen it says i have no songs!

How can I run 2 Dreamweaver windows at the same time?

How can I run 2 Dreamweaver windows at the same time on my
PC?
basically I have 2 monitors and I want to edit CSS on one
monitor and have the html page open on the other so I can quickly
look from one to another with in a split second instead of taking
that extra time to switch back and forth using the tabs at the top,
I know I should probably invest into a mac so i can work out side
of the Dreamweaver application window and I will in the future but
is there any way i can do this on my windows XP pro PC?
Thank you
Maurice

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

How can i find all included pictures in the Online-Library which are not in a album?

Hi
I use Adobe Photoshop Elements 13 with (Revel). My question ist how can i find all included pictures in the Online-Library which are not in a album? I would like only to have pictures in Library which are included in a online album.

Hi there,
I'm afraid I don't quite understand your question. All images are in your Library and only those you specifically select from that Library would be in an Album. What platform are you using? Revel Mac, Elements, web browser, etc?
Here is a link with some helpful information:
FAQ: File Basics: How do I Upload, Download, Share, and Delete files in Revel?
Thank you,
Glenyse

How can i use offline & online database in the same time?

how can i use offline & online database in the same time?
my database in another server when the connection true it connect
but if not does not work
i wanna make offline database if the server not connected it connect offline then the server is on it alter all data from the offline to the server.

User, please tell us your Jdev version!
There is no such functionality build into the framework. The offline data base is only for designing the db, not to have a backup db.
If you can't connect to the db the application will not work.
Timo

How can i get my iPhone 5S bluetooth to work? It does not pick up other devices.

How can i get my iPhone 5S bluetooth to work? It does not pick up other devices.

Shairationgco wrote:
It can't even detect my husband's iphone help!
It's not supposed to. Why are you trying to connect your iPhone to your husband's iPhone?

How can I have two PDFs open at the same time next to each other?

How can I have two PDFs open at the same time next to each other?

Moved to Adobe Reader for iOS.
The only way I know how to do that is with two iPads.

My photos are showing on my Apple TV and I don't want them to. How can I get them off Apple TV and make sure this does not happen again?

My photos are showing on my Apple TV (I assume through the iCloud) and I don't want them to. How can I get them off Apple TV and make sure this does not happen again?

Welcome to the Apple Community.
Settings > iCloud > iCloud photo settings, then turn off photostream and photo sharing.

How can I hide or delete updates from the App Store I am not interested in using?

How can I hide or delete updates from the App Store I am not interested in using?

This works for apps you've acquired, but does not work for built-in features. I am regularly nagged to update Digital Camera RAW Compatibility (currently I'm being nagged about Update 6.03). I've tried the method described above - the steps are available, but they appear to have no effect. I think this is perhaps because RAW compatibility is an element of OSX rather than a separate app. I don't use RAW format with cameras, and have no need for this feature. Even if I did, I have none of the 13 camera models listed in this update.
It is just a nuisance, but if anyone knows how to suppress this I would appreciate instructions.
I would also be curious if anyone can explain why on earth Apple would incorporate RAW camera format compatibility into the core of its operating system. It shakes my confidence in their operating system design.

How do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunes

how do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunekyl

Place the iPod in recovery mode using this program. and then restore via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode

How can I connect 2 bluetooth headets at the same time?

I have a I Pod Touch 4G. I got it to use on my Gold Wing GL 1800 trike on trips. I am using a Sena SMH10D as a bluetooth headset. The touch recognizes my headset and my wifes too. Problem is that it will only send music to one or the other. How can I send the music to both headsets at the same time?

While not the answer I was hoping for, it did answer the question. Thanks for the fast response.

How can I get iPhoto to display ONLY file numbers of pictures and not document titles when displayed as thumbnails?

I am a pro photographer and I've never used iPhoto. I use a combination of Adobe's Bridge, Lightroom & Photoshop programmes. I've sent a disk of images to a client and they cannot see the file numbers of the images. Their version of iPhoto only displays the document title that I have embedded in the metadata when importing the images into Bridge.
When I ran a test and imported the same images into my version of iPhoto(7.1.5, since you ask) some of the thumbnails displayed the file number while others displayed the document title. Why does this happen? Can I make it stop? How do I make iPhoto display just the file number in thumbnail mode and not the document title?
When I view the images in Bridge, all I see is the file number but I can't convince the client to use the programme even though they have it. Any help/guidance will be very gratefuly received.
Many thanks,
Adam.

In every version prior to iPhoto 11:
Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File...
In iPhoto 11:
Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original...
Regards
TD

How can I get a "real" history where the sites won't get deleted when I open them again and I can track my browsing history in full detail??

When I open a site the old entry in the history is deleted. How can I disable this feature? I need a full detailed history for my work. I do lots of research online and sometimes it's important for me to see which pages I visited on a particular day.
For example:
If I opened "http://www.mozilla.org/en-US/firefox/new/" yesterday and opened it again today I couldn't see it in Yesterdays history. I really need this feature for my work.
Thanks for reading
PS: On my other system I have a current version of Firefox (Win 7). Same Problem.

This is entirely my complaint.
I have to sit without useable internet for 5 days when there is no fault, before anyone does anything about it ? BT visit the village to do something for another customer, mess up my perfectly working broadband, and then refuse to do anything about it for 5 days. And I pay full price during that time. Let's just hope they don't come back to do something else within those 5 days !!!
There isn't a fault with the line, it is perfectly stable. I just need somebody to use common sense and set the IP profile back to what it was.
If the system is so clever, it could at least try moving off 135k to 512k say after an hour or so.
I will try using that link though and see if somebody can do something !!
Frustrated is not the word ! If I ran my business like this I'd have no customers left. I'm pretty sure that's not the first time somebody has posted that on here

How can I update cluster items from inside a while loop that does not contain the cluster?

I have a VI that contains front panel clusters and two while loops. The main cluster contains items such as a doubles "distance" and "stepsize" and boolean "step" (a whole buch of this type stuff). The first loop contains an event structure to detect front panel changes and the second contains code and sub VIs to perform operations based on detected events.
The operator can enter data into either double or click the boolean. If distance is changed the second loop does what is required to process the change. The same happens with stepsize. If step is clicked the ±stepsize value is added to distance and the result is processed. In each case the front panel should track the result of the input and subsequent processing.
Because the clusters are outside the while loop, they are not updated unless I click 'highlight execution' which seems to allow updating each time the execution highlight is updated. There are other issues if I move the clusters into one of the loops.
I've tried referencing the clusters and using local variables and nothing works. It looks like overkill to use shared variables for this.
Any ideas would be greatly appreciated.
Thanks,
Frank

Hi Ben,
Thank you for the response. I followed the link and tried reading everything you posted on AEs but I'm afraid that I didn't understand it all. It seems that each AE example had a single input and a single output (e.g. a double). Is this the case?
What I have is a couple of front panel clusters containing (approximately) 18 control doubles, 8 indicator doubles, 5 boolean radio button constructs and 26 boolean control discretes. I clusterized it to make it readable. In addition I'll eventually have a cluster of task references for hardware handles.
All I want to do is update the front panel values like I would do in a C, VB or any other language. I've tried referencing the cluster and using the reference from inside the loops. I've tied using local variables. Neither works. I'm experimenting with globals but it seems that I have to construct the front panel in the gloabal and then I wouldn't know how to repoduce that on the front panel of the main VI. Sometimes it seems that more time is spent getting around Labview constructs than benefitting from them.
I hope the 'Add Attachment' function actuals puts a copy of the VI here and not a link to it.
Thanks again for the suggestion,
Frank
Attachments:
Front Panel Reference.vi ‏33 KB

How can I use "write to spreadsheet" during the data is taking but not the end of all the loops

Hi,
I have to run an experiment on Labview 6 or 5. I don't have Labview 7 on that computer for some reason. My experiment is talking about 1000 hours, and I have a probelm on storing the data. Right now I am using "Write to spread sheet" and I set the "append" to false. And the data is installed at the end of the experiment, that means after 1000 hours. In the mean time if somthing oges wrong like power cut or what, I will lose all the data. So what I want to do is to save the data evertime when the data is took. I tired to set the "append" to true, but it does not let me to choose the "file path"--- when I choose this and select write on new or excisting file, it said" you may not be able to save on a exciting file" and it does not let me create a new file either. If anyone have the lidea like how can I use the "wrtie to spreadsheet" function and at the same time can install the data everytime inside the look, please let me know. Thanks alot.
KL

KL,
It sounds like you want to periodically save your data so it is in smaller files. (great idea) For this operation you will not want to append the data...if something happens to your system while the file is open it could become corrupt and ruin all the data. You need to write the new block of data to a new file every time. Now...this depends on how big your data is...if you only have like 500k of data to write in a block you should probably write several blocks before starting a new file. I don't know enough about how much data you are acquiring. In either case...the write to spreadsheet file.vi will need a different name each time it is called and you will not want to append. Append = false.
-Brett

How can I simulate a scope display where the vertical time grid does not scroll?

Similar Messages

Maybe you are looking for