How can I sink version 10.6.8 with 10.7.2?

how can I syn my mac air 10.6.8 with my mac pro 10.7.2

Hello..
I am also facing problem with my Mac with the upgrade. In my case, when i click on the software update option it says no upgrade available.
System configration is below for your reference:
Hardware Overview:
  Model Name:          MacBook Pro
  Model Identifier:          MacBookPro4,1
  Processor Name:          Intel Core 2 Duo
  Processor Speed:          2.5 GHz
  Number Of Processors:          1
  Total Number Of Cores:          2
  L2 Cache:          6 MB
  Memory:          3 GB
  Bus Speed:          800 MHz
  Boot ROM Version:          MBP41.00C1.B00
  SMC Version (system):          1.27f3
I have purchased iphone5 but could not connect to itunes.
Please advice.
Deepak

Similar Messages

  • How can I read pdf files from LabVIEW with different versions of Acrobat reader?

    How can I read pdf files from LabVIEW with different versions of Acrobat reader?
    I have made a LabVIEW program where I have possibility to read a PDF document.  When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
    It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
    The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
    Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
    This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
    Jan Inge Gustavsen
    Attachments:
    Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
    Read PDF file.jpg ‏201 KB
    Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

    hi there
    try the vi
    ..vi.lib\platform\browser.llb\Open Acrobat Document.vi
    it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"

  • How can I get version 5.0 or higher for my I pad

    how can I get version 5.0 or higher for my I pad 2

    Reader 10.4.4 is available from the iTunes Store.

  • How can i install version 3.6.16 on my mobile device. that is the supported version for my work website

    how can i install version 3.6.16 or a 3 version of firefox on my mobile device. it is required for my work. i have an android system. if there is currently not an option, can one be created? thanks!

    There is no version of Firefox mobile for 3.6. You can try using the Phony extension and in the preferences set the User Agent setting to 'Desktop Firefox'.
    https://addons.mozilla.org/en-US/mobile/addon/phony/

  • HT4743 I just purchased an iTunes TV show and it successfully downloaded. It is now saying that I do not have the proper version of QuickTime on this version of iTunes (10.6.3). How can a show I purchased be incompatible with the latest version of iTunes?

    I just purchased an iTunes TV show and it successfully downloaded. It is now saying that I do not have the proper version of QuickTime on this version of iTunes (10.6.3).
    How can a show I purchased be incompatible with the latest version of iTunes?
    I want a refund, but I can't even figure out how to request one through support. Super frustrated and long time Apple customer.

    After a day of trying, both iTunes and my Apple TV are telling me that the episodes of Scooby Doo I purchased are incompatible due to QuickTime. I still don't understand how I purchased something from iTunes that doesn't work with iTunes.
    the exact error I receive when I try to play an episode is the following:
    "This movie requires QuickTime, which is not supported by this version of iTunes."
    Any advice would be great!

  • How can I limit version status of Report or others components?

    How can I limit version status of Report or others components?
    If somebody knows please help.
    Thanks in advance.

    What exactly do you mean ?
    Do you mean you don't want the version number of the packaged components (e.g. forms reports etc) every time you make a change ?
    If that is the case then I don't think you can do that.
    You may be better served asking this question in the Portal Component Forum

  • How can i upgrade version from 10.6.8 to 10.9.4

    How can i upgrade version from 10.6.8 to 10.9.4?

    Before embarking on a major OS upgrade, it would be very prudent if you to backup your current system to an external connected and Mac formatted Flash drive OR externally connected Mac formatted hard drive. Then use either OS X Time Machine app to backup your entire system to the external drive OR use a data cloning app to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy
    Then, determine if your Mac meets ALL minimum system install requirements.
    To install Mavericks, you need one of these Macs:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Your Mac also needs:
    OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
    2 GB or more of memory
    8 GB or more of available space
    Next,
    If you run any older Mac software from the earlier PowerPC Macs, then none of this software will work with the newer OS X versions (10.7 and onward). OS X Snow Leopard had a magical and invisible PowerPC emulation application, called Rosetta, that worked seamlessly in the background that still allowed older PowerPC coded software to still operate in a Intel CPU Mac.
    The use of Rosetta ended with OS X Snow Leopard as the Rosetta application was licensed to Apple from a company which got bought out, I believe by Micrsoft and Appe  could no longer secure their rights to continue to use Rosetta in later versions of OS X.
    So, you would need to check to see if you have software on your Mac that maybe older than, say, 2006 or older.
    Also, check for app compatibilty  here.
    http://roaringapps.com/
    If you have any commercial antivirus installed and/or hard drive cleaning apps installed on your Mac, like MacKeeper, CleanMyMac, TuneUoMyMac, MacCleanse, etc. now would be a good time to completely uninstall this apps by doing a Google search to learn how to properly uninstall these types of apps.
    These types of apps will only cause your Mac issues later after the install of the new OS X version and you will have to completely uninstall these types of apps later.
    Once you have determined all of this, you should be able to find the latest version of OS X Mavericks by clicking on the Mac App Store icon in the OS X Dock and then login to the Mac App Store using your Apple ID and password.
    You can then begin the download and installation process of installing OS X 10.9 Mavericks from the Mac App Store.

  • I Don't have access to the previous computer on which i installed the photoshop, the m bord is broken and i have a new computer, how can i reinstall on my new comp' with my serial number?

    I Don't have access to the previous computer on which i installed the photoshop, the m bord is broken and i have a new computer, how can i reinstall on my new comp' with my serial number?

    You are allowed to have two machines with activated installations, so if you only had one installation, you still have the option to install on a second without doing anything further than that.  If you originally downloaded the purchase thru Adobe then you might find a download link available in your Adobe account online.  You can also download thru the following page if you can find your version:
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html
    You can have the first installation deactivated to free up the activation and have it available for another machine again as well.  YOu need to contact Adobe Support thru chat for that.  For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • How can I change the email address associated with my iCloud account?Ask your question.

    How can I change the email address associated with my iCloud account?

    sschultz365 wrote:
    When my iPhone updated, it reloaded an old email address as my iCloud address and I don't know the password associated with that email address.  How do I delete the old account and set up a new one with my new email?
    To change the iCloud ID ("email address") you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • How can I get my ipod to work with itunes?

    When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • How can I make a query by date with several TDMS files?

    Hi,
    I have a project that can write and read TDMS files everyday (a file for each day with date and time). There, I can import those files to excel (I choose a file and load it). But, I have a question: How can I make a query by date with those TDMS files? I'd like make a time stamp for start date and stop date, where I could compare the TDMS file dates and sum the values that are in the channels where these files are similar. For example, I save a file with "02/01/2013" name, in other day "03/01/2013", in other day "04/01/2013"... so, i'd like put in time stamp for start date "02/01/2013" file and to stop date "04/01/2013" file, than, sum all values that range with my TDMS files existing. How can I make that? 
    Thanks all,
    Val 

    Hello Val_Auto.
    You're Brazilian, no? Me too. = ^ - ^ =
    I converted VI to version of your LabVIEW (8.5). Is attached in this reply.
    This VI search all your TDMS in a range of dates and join them in a single TDMS. I hope this is what you wanted.
    Query TDMS is the main VI. The TDMS VI Search changes the date format that out from calendar control (which is DD / MM / YYYY) to DD-MM-YYYY. This is because you can't name files using "/". I chose "-" but, if necessary, you should change to keep the same format of your TDMS files.
    If you have any doubt as to its operation or how to make changes to adapt VI for your application, keep at your disposal.
    Thank you for your contact; I hope have helped you and succeed in your application.
    Wesley Rocha
    Application Engineer
    National Instruments Brazil
    Visite a nossa comunidade em PORTUGUÊS!!!
    Attachments:
    Query TDMS.vi ‏62 KB
    tdms search.vi ‏24 KB

  • How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.

    How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.

    You can't unless you have a bootable system on an external drive you can use. Otherwise, you need either the original disc that came with your computer or a retail copy of Snow Leopard DVD. The latter contains 10.6.3, so your model must be capable of booting from that or an earlier version of OS X.
    You can purchase replacement discs from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.

  • HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

    How can I use Airport Express (1st Generation) with OS X Mavericks?

    1st Generation AirPort Express will work fine with Mavericks.
    Are you sure that you have a 1st Gen Express?
    Check the model number on the side of the Express. 1st Gen is A1264.
    If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
    Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

  • How can I get elements 11 to work with 16 bits photos?

    In the expert mode of Photoshop Elements 11, I can only work with 8 bits photos. How can I get Elements 11 to work with 16 bits photos?

    No, you can still buy photoshop cs6 (perpetual license) if one doesn't want to subscribe to the cloud version (photoshop cc version 14)
    Either way is expensive compared to photoshop elements.
    http://www.adobe.com/products/cs6.html?promoid=JOLIS

  • I have a MacBook 6,1 and have a number of start up discs. How can I find out which one came with my model?

    I have a MacBook 6,1 and have a number of start up discs. How can I find out which one came with my model?

    They sometimes have that information on the label. Otherwise, it's trial and error. The model you have is a Late 2009 13" MacBook. It came with a special version of 10.6.1 pre-installed.

Maybe you are looking for