How can I skip/pass a lesson when the pre-test is passed?

I'm creating a course with an overview and 3 lessons. Each is its own CP file (Captivate 6).
This course will be hosted in our LMS, where I will require each lesson to be taken/passed.
Lesson 1 is introductory/background material about my topic, and my users may or may not have had exposure to this information already. If they know the info, there's no need for them to take this lesson.
I have added a pre-test to the lesson, that, if failed, forces the user to go through the lesson content and a graded quiz at the end. The score is reported to the LMS and all is well.
If the user passes the pre-test, s/he is jumped to a congrats slide and instructed to exit the lesson. (No need to take the graded quiz - the questions are the same, and they've already "passed.")
My question: How do I report a PASS for the lesson if the user doesn't take the graded quiz? I don't need to report any particular score.
Thanks for any help you can offer!

Lieve, I'd LOVE to see your blog post about this topic - especially since you always include examples. =)
Request: I need help with reporting.
Here's my project's Branch View (click to view larger):
I've done as you suggested as far as I know. The navigation works perfectly, but when it comes to reporting, I'm not seeing what I expect/want.
What I want:
For the user to be able to skip the pre-test (the branching image shows this)If the user passes the pre-test, can exit the course with a Complete/Pass
For the user to have X number of chances at the test. After the user a) passes or b) uses up X chances and still fails, I want to report back to my LMS (I'm testing in scormcloud right now, but will be using HealthStream) both completion AND pass or fail.
What I've got:
The user CAN skip the pre-test (the branching works, anyway)
I can get Captivate to report Complete/Unknown or Complete/Pass (sometimes, even when the user fails the graded quiz), or Incomplete/Unknown.

Similar Messages

  • How can I turn off "reply" button when the messages come? I prefer the "open" button.

    How can I turn off "reply" button when the messages come? I prefer the "open" button. Because my friends usually send lots of messages at the same time so I cannot read all of them when I press "reply", then I have to go to Messages -> my friends' messages, and it's really complicated.

    Sorry for not quite understanding. I guess you are referring to a notice in an alert. I do not have that alert active on my device, so I cannot say. I use the banner alert, so I just get a notice of a message and can swipe to open that particular message. If I ignore it, it will eventually go away.

  • How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

    How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

    All apps (and other content from the store) are tied to the account that downloaded them, whether or not they are free. To do in-app purchases in that app you will either need to log in with the account that downloaded it, or delete it (which will delete its content) and download it with your currently logged in account if you want to do IAPs on that account.

  • How can I block spam e-mail when the "from address" keeps changing?

    How can I block a spam mail sender when that spamer uses a different e-mail address everytime!  I have set up a rule with the spamers name (which does not change) and setting the rule to "is equal to" but it is not working. 

    deckersmom
    Verizon can't fix it and yahoo can't change your Samsung application function.
    Just use the free Yahoo app.
    i Have a yahoo and Gmail and use separate apps for this reason.

  • TS1292 how can i redeem a gift card when the response is non activated card

    How can I find the problem with itunes giftcards when the response is card not activated?

    Ask the people at the store the gift card came from or the iTunes Store staff for assistance.
    (96009)

  • How can i log onto my ipad when the screen says ipad is disabled log onto itunes. i logged on to itunes but nothing is recognized

    Hi,
    I had forgotten my password and made many attempts to log on to my Ipad. Finally after remembering the password it was to late to enter it. My screen says "Ipad is disabled, log on to ITunes. I logged onto ITunes and nothing is recognized an I cant find a category for correcting the problem. Any help will be greatly appreciated. Thanks

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How can I make a JButton enabled when the user types smthg in a JTextField?

    Hello,
    I have a JButton and a JTextField on a frame. The JButton is disabled, myButton.setEnabled(false).
    How can I enable the button when the user types something in the text field? Just typing, not pressing enter.
    Thank you

    There isn't one, actually. What you need is a DocumentListener and you have to associate it with the document object associated with the field i.e.
    field2.getDocument().addDocumentListener() (new DocumentListener() {
    });

  • My Apple ID is registered in wrong email address. How can i change it or else when the server reply me to check my email that i can't check due to they sent to wrong email address...

    Please give advice of how can i change my Apple ID (email address) as it is wrong address. Like i just update my iPhone to latest version 6.0, and get the new app, iCloud which need me to key in my Apple ID and Password. I have no choice to use the wrong email address as it is already registerd since from 1st day i use my iPhone. Then i received the reply that tell me to check my email for verifing but the problem is i can't check my gmail as they sent to the email is not my actual gmail address....
    How can i solve this problem?

    You may change your Apple ID to any email address that is not already used as another Apple ID, or that is not already associated with another Apple ID.
    In other words, if I have an Apple ID [email protected], and have alternate email addresses of [email protected] and [email protected], none of them may be used by me or anyone else for an Apple ID, Rescue Email, alternate email, or anything Apple-related.
    If the Apple ID link above indicates your email is already in use then it is. Use https://iforgot.apple.com, select Forgot your Apple ID? and provide the information requested. If the email address is one you created and can still access, you may be able to retrieve it. If it is one someone else created, you will not.

  • How can I repair 10.6.8 when the disk my computer came with is 10.5.4?

    Ran Verify Disk and received the following message:
    "This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."
    I attempted to do this but while booting the computer would stop at a blank white screen and do nothing.  Then I realized that my iMac is running 10.6.8, but the installation disk that came with it when I purchased it is 10.5.4. What can I do to repair my disk?

    How did you upgrade to Snow Leopard? You must have purchased the retail Snow Leopard DVD. That is your installation disc. I would not do repairs using a Leopard copy of Disk Utility.

  • What do i do when external optical drive doesn't show up in finder?  how can i import software, music, etc. when the drive isn't recognized/mounted/whatever?

    the internal optical drive on my early 2006 20"imac has mechanical problems ejecting discs.  i've gone thru all the recommended steps to eject discs, and have luckily been able to eject the last 3 discs but only after spending 30-60 minutes going thru all of the steps over and over, and today just trying "eject disc" in itunes since i had itunes open.  i don't want to put another disc in - the drive clearly has problems with the mechanical eject mechanism, and from what i've read that's not unique to my computer.
    i bought an external optical drive: lite on, clamshell design to avoid problems with the eject mechanism; i contacted the mfr who said it's mac compatible.
    the drive plays dvds, which is all i've tried so far, but doesn't show up in finder.  so i don't know how to use it to load software, or music, or anything besides watch dvds.
    is there something i can do to get the drive recognized/mounted/whatever?  i would prefer to not spend the $220 which was quoted to me by an authorized mac repair company, even tho i think that's probably a reasonable cost given the delicacy of the operation as shown on ifixit.com. 
    thanks!

    I have an external LaCie burner and it will not show up on my Mac unless I insert a CD or DVD - in that case, the media will show up (I have these settings in the Pref Pane):
    If you want to burn files or music to blank media, you can use Finder or Disk Utility for files, but should use an iTunes playlist/iTunes for music and a movie burn app for videos/movies (such as iDVD, Roxio Toast, Burn, etc).
    If you simply want to drag files over as a backup, an external hard drive is a much better solution than a burner.

  • How can I get a Quicktime update when the update states that an MSI for the previous version is missing

    How do you get a new version of Quicktime when it states that the msi for the old version is no longer available?

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up").
    In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time?

  • How can I log on my session when the memory disk is full. I can't enter the password

    Need help!!!
    I can't start my session on my air book .. Some days ago I had a message which sayed that the memory disk is full..
    I wasn't starting to cancel files so when I would do it some hours later I can't anymore enter the password of my session.
    Some one can help me please.

    Use your computer to go to http://www.icloud.com/find
    Locate your iPhone, and choose "Remove This Device" on the bottom.

  • How can I verify my iTunes account when the link doesn't appear in the email?

    I updated my iPhone with the latest update, and my iTunes account now has to be verified. I've resent the email to myself about ten times, but the link will not appear. I can't use iCloud and I can't redeem iTunes cards to purchase songs. I'm not sure what to do.

    You can verify by signing in at My Apple ID. You'll receive an email prompting you to verify.
    If that doesn't help, try this...
    Launch iTunes on your computer
    From the iTunes menu bar click iTunes / Preferences then select the Advanced tab.
    Click: Reset warnings and Reset cache
    Click OK.
    Restart your computer, restart your iPhone.
    Go to the iTunes store on your computer then click Redeem under Quick Links right side of the window.
    See if you can redeem a gift card.

  • How can I redeem anitunes gift card when the redemption code was partially scratched off when removing label?

    Can I use the gift card number somewhere to still redeem the itunes gift card?

    If this page doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • How Can I Remove a Secondary Site When The Server no Longer Exists?

    This organisation deployed a new SCCM site and then decommissioned the server before successfully removing either the site or the server/roles.
    I tried to force the removal of the site which failed:
    C:\Program Files\Microsoft Configuration Manager\bin\X64\00000409>preinst.exe /delsite xxx
    Microsoft System Center 2012 Configuration Manager v5.00 (Build 7804)
    Copyright (C) 2011 Microsoft Corp.
    Cannot find site [xxx] in the site control data in the database. Checking in ServerData in the database.
    Failed to execute SQL query.
    The secondary site is showing in the console as 'deleting'.
    Can anyone advise the best way to proceed?
    Thanks.

    I had the same issue and this is what they sent me... I used it and it worked for me.
    1.       Please follow these steps to manually delete the
    Secondary Site from the Secondary site server
    2.       We also used the PREINST tool to remove the pending jobs.
    3.       On the ConfigMgr primary site (parent) computer, click Start, and then click Run.
    4.       Type cmd in the Open box, and then click OK.
    5.       At the command prompt, type cd\, and then press the ENTER key.
    6.       Type cd sms\bin\i386\00000409, and then press the ENTER key.
    7.       To remove any pending or active jobs to a site, type Preinst /DELJOB SiteCode , and then press the ENTER key.
    8.       We deleted the Secondary Site from the console of parent  site.
    9.       We removed the Sender Addresses from the Configuration Manager console, as explained below.
    10.   Click Start, point to All Programs, point to Systems Management Server, and then click ConfigMgr Administrator Console.
    11.   Locate the Site Settings\Addresses subtree.
    12.   Right-click the address for the failed secondary site, and then click Delete.
    13.   Then we cleaned the registry, by taking the backup of the HKLM Node
    ·         HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS
    ·         HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NAL
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SMS_Executive
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SMS_Site_Component_Manager
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SMS_Bootstrap
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CLISVC
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SMS_Discovery_Data_Manager
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SMS_Lan_Sender
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SMS_Scheduler
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SMS_Site_Backup
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SMS_Software_Metering_Processor
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SMS_Status_Manager
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_CLISVC
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_SMS_BOOTSTRAP
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_SMS_EXECUTIVE
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_SMS_HARDWARE_INVENTORY_AGENT_SERVICE
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_SMS_KEY_CREATION_SERVICE
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_SMS_SERVER_BOOTSTRAP_servername
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_SMS_SITE_COMPONENT_MANAGER
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application\SMS Client
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application\SMS Performance Data Provider
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application\SMS Provider
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application\SMS Remote Control
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application\SMS Server
    ·         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application\SmsClient
    Thanks Lavelle, however your instructions are clearly for SCCM 2007:
    11.   Locate the Site Settings\Addresses subtree. 
    12.   Right-click the address for the failed secondary site,
    and then click Delete. 
    Can you confirm you have run these steps on your own SCCM 2012 site?

Maybe you are looking for