How can I slow down the "Far far away" title?

I want to slow down the title so I can read the information without extending the picture length. Is this possible?

1. Press the Crop button (seen on the top right bar where "reset all" is located)
2. Change the "crop to fill" or "Ken Burns" to "FIT"
3. Press the button that looks like a speed gauge on the top bar... press it and on there should be a label named "Speed"
      and next to it is a drop down menu... Use that to change the speed
     - Here you will see "Normal", "Slow", "Fast" and "Custom".
     - Choose either option
     - I recommend choosing "Custom" so that you are able to control the speed by a percentage interval
If you have any questions, please reply!

Similar Messages

How can I slow down the music of my clip?

How can I slow down the music of my clip?

Try using the following code after each time you write to the TextArea. I am assuming you are using a TextArea component and are trying to control the position of where it is scrolled to when it refreshes with the chat data.
"ta" is the instance name of the TextArea
ta.verticalScrollPosition = ta.maxVerticalScrollPosition;

How can I slow down the playback speed of selected parts of a captivate video?

Hi everybody,
I'm pretty new to Captivate and although it offers some great tools, there is something that I just can't get to work:
I'm creating a video tutorial about how to use a website i'm working with so I've tried using "Automatic" ("Demo" mode chosen) recording option which is recommended for this type of video. However, the video recorded has a different playback speed than the amount of time I recorded. This means that some of the slides have a quicker playback speed than the way I recorded, thereby not leaving enough time to show the given feature.
The recording mode with the most "true" playback was "Full motion". However, I would still like to be able to slow down selected parts of the video, but can only find guides on how to slow down the entire presentation.
Can you please advise me on how to slow down only selected parts of the project? If this is not possible in Captivate, please advise me on which video editing software (where you can slow down the playback speed on selected parts of the video) is compatible with Captivate 5?
Thanks!

Thank you. Andrew Kramer's Video Copilot video, which I somehow managed to miss, was very helpful.
I had a 79 second clip which I precomposed and enabled time remapping. But I have 12 places where I need to slow down the layer. After a while, I was runing out of room to add more keyframes using the method promoted in many videos and instruction sites (grab the last two keyframes, including the end frame, and drag).
In reality, you can add keyframes wherever you like and you can adjust them however works best within the existing timeline without messing with the duration, etc.
Much appreciated.
Paul

Magic Mouse - How can I slow down the scrolling function on Mac OS X?

I'm a designer. In Illustrator and othe programms, I try to scroll but its to fast so I flip through the pages. I want to slow down the scrolling function of my mouse but where can I find it in OS X 10.7?

Ahh,
Just the App not the support folder I'll be bound.
8:23 PM Wednesday; August 15, 2007

How can I slow down my movie?

Hi,
I have created a logo using several objects. And they come one by one on my stage while playing. But these objects (which all are movie clips) coming too fast. How can I slow down them?
Thanks.

kglad wrote:
add more frames to the timeline that has your logo tween.
I have added more key frames but the speed is still fast. What is the next step to slow it down, please.
Thanks.

Can i slow down the music speed?

how do i slow down the song speed while im listening to it, please help. =D

What I usually do is set a marker for every beat. Then I can go back and edit my clips to the markers, and it syncs up with the music. Course it might be kind of hard to set 15 markers in one second...
On the other hand, Capt. Mench's technique is definitely a good one. A fantastic one, actually. Markers would just be another method of doing it.
(On a side note, that video is awesome, Captain. Especially using the brackets to trim. I never knew about that. Thanks for the tip, and thanks for posting it, David.)
Good luck, B, and hope one of these methods works for you.
jesse.

HT1305 how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

Ok, I saw that error in your logic. A Dual G5 2.3 or even a Dual Core 2.3 does NOT use LCS at all. Its air cooled and if anything if the OP is experiencing this problems could be due to possible heatsink paste drying up. He might have to re-apply MX 7 or Arctic Silver.
The only G5's that use LCS are: G5 dual 2.5 from Late 2004, the G5 Dual 2.7 from Early 2005, and lastly the G5 Quad-Core from Late 2005-end of September 2006.
Hope this helps.

How do i slow down the scrolling in organizer?

how do i slow down the scrolling in organizer? it is so out of control that the program is unusable.

so found my old mouse with a cord and you are right, it is much better! wow. and thank you. i went on chat and they didn’t even suggest this. makes it usable. any thoughts on how to replace the right click functions?

How can I shut down the start sound on my IMac under OS X 10.9.5

How can I shut down the start sound on my IMac under OS X 10.9.5

Did you try using 'mute' in the System Preferences> Sound> output>
control panel? This usually will mute the startup sound; you may have
to try a few things to be sure only the startup will mute, not all sounds.
Of course, you could likely write an apple script in automator or in
text edit, that could automatically mute before shutdown and then
in startup items, have the script un-mute the audio for everything.
There are possibilities that do not include the command line; but
if you learn how to use that, without messing up other functions,
then even more custom control is possible in Mac OS X.
With that, you could write a substitute 'sound file' with white noise
or nothing in there; so instead of Bong, it'd be as quiet as a mouse.
PS: You may have a local reason why the site link posted above
does not work for you, but it does function and if the product is
free to use, and does not include adware or malware, here is an
untested download link from their site. (I can go there, easily.)
http://www.allvu.com/index.php/sndownloadpage.html
and note:
http://www.allvu.com/downloads/StartNinjaInstaller.dmg is the
actual DL link for this product. Mouse over the buttons to see it.
(The other downloads are highly suspect; even this one is to me)
There may be a reason in your Mac OS X 10.9.x for gatekeeper
to not allow odd download installations, there is a way around
that feature, but I do not recommend using unknown software.
In any event...
Good luck & happy computing!
edited 2x

Can I slow down the rate of movement at end of a Ken Burns?

And can I bring up a still, then have the burns effect begin aftyer a second or so?

John Kernan wrote:
And can I bring up a still, then have the burns effect begin aftyer a second or so?
Just add the same photo with no KB effect before the photo that you are adding the KB effect to.
Basically you will be adding the photo twice. one with the KB effect one without. The key is to make sure your KB effect starts at the same spot as the preceding image.... otherwise there could be a little jerk
yes....
To slow down the rate of a Ken Burns effect simply add more time that makes the movement much slower...

How can I "slow down" portions of a layer?

I am modifying a composition template. It has only a few layers but four folders with numerous layers in each. I want to "slow down" the frames at certain points in the layer then resume normal speed. I am guessing that I can do this on the layer of the "top level timeline" without going into individual placeholders, etc., by manipulating frame rates somehow just for certain portions of the layer. This obviously results in a longer composition and that's another factor to consider.
What is the best and easiest way to do this? I am hoping that there is another way besides frame freezing or holding. I am using AE CS4.
With sincere thanks,
Paul

Thank you. Andrew Kramer's Video Copilot video, which I somehow managed to miss, was very helpful.
I had a 79 second clip which I precomposed and enabled time remapping. But I have 12 places where I need to slow down the layer. After a while, I was runing out of room to add more keyframes using the method promoted in many videos and instruction sites (grab the last two keyframes, including the end frame, and drag).
In reality, you can add keyframes wherever you like and you can adjust them however works best within the existing timeline without messing with the duration, etc.
Much appreciated.
Paul

How can I slim down the aperture library?

Hi,
My aperture library grew a lot. Is there any way to slimmed it down, without erasing content? I am talking about recreating previews with less quality or smaller size, deleting old thumbnails (I read that even if you delete a picture from the library, Aperture won't delete the thumbnail).
Does anybody knows any tricks about how to do that?
Thank you very much for your answers!
Gus

Easy. Switch to Referenced-Masters Library with Masters on external drives.
More complete explanation:
First make a Vault to an external drive as backup.
Then from within Aperture:
File Menu--> Relocate Masters. Choose external hard drive(s) and direct Aperture to move the Masters to those drives. Give it plenty of time depending on how many Masters are being moved. The Library remains on an internal drive, only the Masters get moved.
Next back up the drive that the Masters were relocated to, because now you have a Referenced Masters Library so Masters are backed up (once) separately from the Library Vault backups.
In the future back up originals (once) on external drives prior to import into Aperture or any other images app. I cannot overstate how important that is, and various manuals, texts, etc. present workflows that skip that critical step. Also back up the Aperture Library using Aperture's Vaults, which are designed for that purpose.
A complete Referenced-Masters workflow follows. Note that for image security reasons Aperture is not involved until the end of the process:
• Create a folder ("abc") for the incoming images. Easiest is to create the folder on the external hard drive where the Masters will permanently live, but Referenced Masters can be temporarily on the laptop's internal drive, then moved later as described above. I initially put Masters referenced on my MBP internal drive, then after backup and editing I use File Menu--> Relocate Masters to move the Masters to a permanent external drive location.
• Connect a card reader with the camera card in it. The camera card should show on the desktop. If it does not show, restart the Mac with the reader and card still plugged in. You can of course use the camera directly in this step, but I do not recommend it. Obviously cameras like the iPad2 do require direct camera-to-computer uploading.
• Drag the contents of the card's image folder(s) to the abc folder that you previously created on the hard drive.
• Review the abc folder contents to be sure they all copied properly.
• Software-eject the camera card.
• Physically disconnect the camera card reader from the Mac. This step is important to help avoid all-too-common human error.
• Again review the abc folder contents to be sure they are indeed all there (because stuff happens sometimes...).
• Back up the abc folder contents on to another drive.
• Review the files on the backup to be sure they all copied properly.
• At any time after but not before the previous step you can reformat the camera card in-camera. Do not delete images on the card using the computer.
• Start Aperture.
• Import the images from folder abc into Aperture, selecting "Store Files: In their current location" on the right-hand side of the import window (important!). Note that the Library remains on an internal drive, only the Masters are on externals.
HTH
-Allen Wicks

How can I shut down the computer?

How can I put shutting down symbol on the screen?

hello naresh, this isn't really a question about firefox, so please refer to microsoft's support section: http://answers.microsoft.com/en-us/Search/Search?SearchTerm=shutdown%20button&CurrentScope.ForumName=Windows&CurrentScope.Filter=windows_8&page=1&tab=Microsoft

I just bought MacBook Pro 13'' for 1 week, and load cycle is 11. How could I slow down the load cycle count?

The question is that, Could anyone tell me how to slow down load cycle count?

"Apple does not recommend leaving your portable plugged in all the time. An ideal use would be a commuter who uses her notebook on the train, then plugs it in at the office to charge. This keeps the battery juices flowing."
Could you please explain me this?
I also want to ask another question is: " Is it good if I charge to 100%, then drain battery to 80%, then plug-in charger again"?

How can I scroll down the top menu list and then the sub-menu lists when the iPod click wheel is broken?

I have an iPod Classic 4th Generation and my click wheel connection is broken and so does not work. I can still play music on my Bose dock station but I cannot choose which album I want to play because I cannot scroll down the playlists. I can just play the first tune in the list or from where I last paused a tune. Is there a way to scroill down the list, including the top menu list, without using the click wheel?

Index Values, I think, is the property you are looking for. Set the index to 0 to be at the top.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How can I slow down the "Far far away" title?

Similar Messages

Maybe you are looking for