How can i solve an error statin that "The iPOD ______ could not be restore. An unknow error occured (3194). "?
can some one help!!!!!!
http://support.apple.com/kb/TS3694#error3194
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs
Similar Messages
-
Please Help..
Trying to restore / update ipod 3rd generation - keep getting error message - The ipod touch could not be restores. An unknown error occurred (-1).Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. in that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Itouch was reset to factory defaults. Have tried ideas listed in ITunes help. Any ideas?
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The" may need service' meand there is a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
what is the error 1015? msg pop up while restoring my iphone.
This usually means the iPhone has been hacked/jailbroken and it may no longer work as a result.
http://support.apple.com/kb/TS3694#error1015
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. -
The iPhone "iPhone" could not be restored. An unknown error occured (34)
I saw a warning that I can upgrade my iPhone 3GS with os 3.1.3 to iOS4 at iTunes 9.2.0.61.
So I Tried to upgrade my 3GS to iOS4.
After downloading iOS via iTunes it started to backup, and installing then crashed with Error code 34 when it began installing.
After all of that I saw a picture on my phone. It is iPhone cable anf iTunes Logo.
And I always get "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." when i plug this any PC.
I saw only Restore button on Summary tab on iTunes. When I try push this button.
Asks me that am I sure to want to restore. I click "Restore and Update".
It is:
extracting software
-verifying sofware
-preparing iphone Software
-restoring iPhone software.
-verifying iPhone software
-verifying iphone restore.
-restoring iphone firmware.
And after that I saw an error which like that :
The iPhone "iPhone" could not be restored. An unknown error occured (34).
Well so I started trying :
Other USB port and other USB cables.
4 Different PC (Vista, Windows 7 and XP)
Different Windows Users.
4 Different iTunes versions.
With DFU mode.
Downgrading OS 3.1.3.
Nothing works for me.
Is there anybody to help me? What is code 34?Here is a couple of pages that may help you.
http://support.apple.com/kb/TS1275
According to this page error 34 is an error due to security software interfering with the process
Also it points to this article
http://support.apple.com/kb/TS3125
Read these, and you may find a solution to you issue. -
how can I solve this error message? "Some of your photos, including the photo “IMG_0374.jpg”, were not copied to the iPad “(my name’s) iPad” because they cannot be displayed on your iPad."
There were 273 photos in the event syncing from my Mac, but only the last 103 made it to the ipad. Most of the photos were taken by an iphone. I would appreciate any thoughts or insights - thanks.Adrian-
That error message suggests the photo is somehow corrupt.
Do you have the Apple Camera Connection Kit? You can set up a USB thumb drive with MS-DOS FAT-32 format and copy your photos to it into a folder named DCIM. Assuming they have an 8 character plus suffix name, the iPad will recognize them and give you the option of transferring them via the Kit's USB adapter.
Once they are transferred, you can find out if there is a problem with any.
Fred -
What is this Configuration Error: 1 = I must reinstall the AI every time again and again and loose so much time! How can I solve this error?
please answer on my email too
[email protected]Nobody can tell you anything without proper system info or other technical details. The simply answer probably is that you are running your system with insufficient user privileges and system restore or some security tools are blocking stuff/ erasing your install.
Mylenium -
Since I updated I can't open anything that comes in a pop upwindow i.e. pdf or mail window. How can I solve or go back to the previous version - it worked just fine.
I am not sure what your problem is, can you give more details.
One possibility is you may be in full screen mode, for details on fixing that see the [[menu bar is missing]] article.
If you are missing various toolbar items, see the [[back and forward or other toolbar items are missing]] article.
If your problem is something else please give more details. -
How can I publish a project so that the link to embedded flv is not lost?
When publishing an Adobe Captivate 3 project, the embedded flv file does not play.
How can I publish a project so that the link to embedded flv is not lost?I am not really sure, if I understand you right. But try this:
Don’t place a picture, but draw a box and use the "Fill" command to put a picture into it.
(Don’t click onto the color swatch, but onto the blue link "Fill".)
In this case responsivness should work. -
I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.
Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About? -
when i try to update my iPhone 3G software, the message alert showing (The iPhone ''iPhone'' could not be restored. An unknown error occurred). now my iPhone 3G blank display. how can i do then please?
I was not sure about the ''jailbroken''. now my iPhone cannot use, on the showing (connect to iTunes logo). so if i just want my iPhone process in normal, what can i do? i mean i want it back to the previous software version?
-
When I Restored my ipad 2, it will come out error [ The iPad "iPad" could not be restored. An unknown error occurred (-1). How can I do?
http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice. -
How can I detect in Business HTML that the app was called from portal?
How can I detect in Business HTML that the app was called from portal?
I need to distinguish whether the application was called from portal (URL iView) or by using an URL outside of portal.
So what I'm looking for is a variable or function that can be used like this:
`if (~within_portal==1)`
do this if called from portal
`else;`
do that if not called from portal
`end;`
For example, can I check in the program that there is a SSO2 cookie from the portal?
I'm using Integrated ITS in Basis 700.Here is the trick:
if (sapwp_active=="1")
in portal
else
without portal
end; -
I tried updating my Ipad to ios 6 and got a error while during the process and now it says I have a Ipad that needs to be restored if I click restore I get The Ipad "Ipad" could not be restored. An unknown error occured (3014) how can I fix this issue I updated Itunes to newest version and tried to hold down sleep/awake and Home button to reset Ipad and tried redownloading software onto another user itunes same thing please help thanks.
Place the iPod in recovery mode and then try to restore:
http://support.apple.com/kb/HT1808
Also see here:
http://support.apple.com/kb/TS3694 -
The ipad"ipad" could not be restored. An unknown error occured (16). How do I resolve this error?
Your error code falls within the 10-47 range mentioned here.
Check for hardware issues
Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
Error 1015 might happen after making unauthorized modifications to iOS, also called "jailbreaking."
Use recovery mode to restore your device
Related errors: 1015, “The required resource can't be found.”
You might see these error messages if your device has a beta version of iOS or if you're installing an older version of iOS (downgrading). Use recovery mode to restore your device to the latest version of iOS.
Quit virtualization software
Quit any virtualization software (such as Parallels or VMware) that’s running on your Mac. Then use the latest version of iTunes to restore your device.
Maybe you are looking for
-
On my old Macbook whenever I would sync my iphone, if I had changed something on the calendar it gives me the option to choose between the computer event or the iphone event (so lets say I'm out and I changed the time of my appointment on my phone, w
-
VM Server 2.1.1 3.1.1 compatibility
Hello, I currently have a version 2 Oracle VM server and I might want to upgrade this system to the latest version. My question is though, if I transfer all my VM images to an external storage, will they be usable without changes on the new system? O
-
How to install a clean copy of Lion on my mac book pro
Since installing Lion on my Mac Book Pro June 2011 17 inch model I have had nothing but problems. I would like to wipe mt HD and start again with a completely clean copy of Lion. How do I do this ?
-
Availability check for components
Hi All, We have one material which is assembled by using two components (BOM). During avaiability check in sales order system should check components stock available in Stores. · If there is sufficient stock of the component materials is available, t
-
Pen Tool/Anchor Point Help
I often draw/trace things using the Pen Tool. I start with an anchor point (A) then click to make another (B), then I drag the first handle away from the anchor point in order to make a bezier curve. The problem comes when I need to continue the pa