How can I solve my Atheros adapter poor reception problem?
Pavillion p6144f desktop running Windows 7 64 bit
Connectivity issues in wireless situation
Atheros 802.11 a/b/g/n adapter not responding well
Poor reception with modem 8 feet away
This question was solved.
View Solution.
Here are the specs for your HP Pavilion p6144f Desktop Computer. According to the specs, your wireless card supports two (2) antenna connections: 2 internal posts to connect an internal or external antenna. Please verify that there is an antenna or two connected to the 802.11 wireless card. Also, if you are attempting to use 5GHz, consider using 2.4GHz instead. I have tried using 5GHz and the signal doesn't travel very far (example; router down stairs, simultaneous 2.4GHz and 5GHz... phone upstairs, 6 bars on 2.4GHz, 1 bar on 5GHz)
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
Similar Messages
-
How can I solve this nested IView / empty dropdown problem?
Hello VC experts,
I've got a VC model with a nested IView that contains drop down lists.
As long as the nested IView was only used in one place, everything was fine.
Then I used the nested IView in a second place, and this caused the following problems: After deployment, the dropdowns were empty in the place where the nested IView was already used previously, in the second place everything was OK. The dropdowns display an empty field, and when I click on them as if to select an item it 'drops down' but again there's just one line that is empty, i.e. white.
Did you experience this before?
How can I solve this?
Kind regards,
FlorianHello,
Just had the idea that I could try posting the .gml file in here. Lets see if that works.
<?xml version="1.0" encoding="utf-8"?>
<GMLPACK kit="EP" version="700.11" build="0027" model_name="error_dropdown_nestediview" model_schema_version="1.01" reserved="VisualComposer04"><GMLUNITS><AAA3FUF name="error_dropdown_nestediview" modified="14/01/2008 12:00:37" metadata="LOGLOCATION:" orig_guid="GM127189c0daec11dca6307abae1e458be"><AAD3FUG name="iView 3FUG" parent="AAA3FUF" win_type="SUB" win_scale="AUTO" win_layout="AUTO" win_pattern="STD" win_navigator="STD1" win_caption="true" pos="700 175" author="Public" modified="14/02/2008 12:29:06" orig_guid="GM0c091400daf011dc9e907abae1e458be"><ACA3FUH name="Form1" parent="AAD3FUG" box_style="0" box_features="TTL EDT" box_size="320 160" form_layout="ABS" labels_align="BEFORE" overflow="EXC" pos="550 210" box_pos="8 8" orig_guid="GM0c091401daf011dcbb437abae1e458be" fields="{DD:{type:'10',add:'V',ctl:'8',show:'Y',text:'Dd',dsg:'15',ownEnum:'#ID[AXC3FUK]',useEnum:'#ID[AXC3FUK]',pos:'100 8',size:'120 16'}}"><AEA3FUI name="in" parent="ACA3FUH" role="IN" spec="UI_OBJ_IN" anchor="L15" pos="0 15" orig_guid="GM0c091402daf011dcbc867abae1e458be"/><AEA3FUJ name="out" parent="ACA3FUH" role="OUT" spec="UI_OBJ_OUT" anchor="R15" pos="80 15" orig_guid="GM0c091403daf011dcbf157abae1e458be"/><AXC3FUK name="ENUM[ACA3FUH:DD]" parent="ACA3FUH" enumMap="apple:apple;orange:orange" orig_guid="GM0c091404daf011dcb5a97abae1e458be"/></ACA3FUH></AAD3FUG><AAD3FUL name="iView 3FUL" parent="AAA3FUF" win_type="TOP" win_scale="AUTO" win_layout="AUTO" win_pattern="STD" win_navigator="STD1" win_caption="true" pos="435 235" author="Public" modified="14/02/2008 12:29:06" orig_guid="GM0c091405daf011dcaad47abae1e458be"><ACG3FUM name="iView 3FUG" parent="AAD3FUL" box_style="0" box_features="TTL" box_size="680 328" pos="445 200" box_pos="8 8" trg_unit="#ID[AAD3FUG]" orig_guid="GM0c091406daf011dca6c97abae1e458be" fields="{}"/><ACG3FUN name="iView 3FUG" parent="AAD3FUL" box_style="0" box_features="TTL" box_size="680 336" pos="660 200" box_pos="8 344" trg_unit="#ID[AAD3FUG]" orig_guid="GM0c091407daf011dca0567abae1e458be" fields="{}"/></AAD3FUL></AAA3FUF></GMLUNITS><enums/><IMAGES/><TRANSPORTLOG/></GMLPACK>
I think if you save this as 'error_dropdown_nestediview.gml' you could reimport it into your model.
Lets see.
Best regards,
Florian -
My magsafe adapter doesn't work, how can i solve this problem?
my magsafe adapter doesn't work, how can i solve this problem?
You can get a 60W power adapter for about $20 on eBay http://www.ebay.com/sch/i.html?_trkparms=65%253A1%257C66%253A2%257C39%253A1&rt=n c&_nkw=macbook+power+adapter&_dmpt=Laptop_Adapters_Chargers&_sticky=1&_trksid=p 3 286.c0.m14&_sop=12&_sc=1
-
how can I solve this error message? "Some of your photos, including the photo “IMG_0374.jpg”, were not copied to the iPad “(my name’s) iPad” because they cannot be displayed on your iPad."
There were 273 photos in the event syncing from my Mac, but only the last 103 made it to the ipad. Most of the photos were taken by an iphone. I would appreciate any thoughts or insights - thanks.Adrian-
That error message suggests the photo is somehow corrupt.
Do you have the Apple Camera Connection Kit? You can set up a USB thumb drive with MS-DOS FAT-32 format and copy your photos to it into a folder named DCIM. Assuming they have an 8 character plus suffix name, the iPad will recognize them and give you the option of transferring them via the Kit's USB adapter.
Once they are transferred, you can find out if there is a problem with any.
Fred -
my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help
Hey nocillado,
Thanks for using Apple Support Communities.
It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using the same Apple ID for Store purchases and iCloud (recommended)
Have a nice day,
Mario -
my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished
Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.
-
How can i solve "Cannot connect to the iTune Store" issue on my iPhone?
Hi,
Frequently i'm getting alert message (Cannot Connect to the iTune Store) while use my valid Credential on iPhone 4 (even Itunes application) Setting-> iTunes & App Stores->. but same credential accepted other iPhones too why not in my iPhone 4. same way others Apple ID wouldn't accept in my iPhone 4. how can i solve this problem? please suggest me.
Thanks in Advance,
Suresh Balakrishnan.Take a look at these instructions:
http://www.digitaltrends.com/mobile/how-to-make-ringtones-for-iphone/ -
I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.
I don't see an issue, but if you mean why didn't you get most of your memory back you need to see what else is using storage. Go to Settings/General/Usage. Wait a bit for it to calculate storage allocation, then when it finishes you can see how much storage each app uses.
-
I'm having trouble with my Apple ID. I changed my email account, and recently (a month ago) and since I switched is requested every time I open any app to Apple ID password to the old email. How can I solve this? Could it be that my iPhone 4S is in sync with my Ipod???
If you updated your existing account then try logging out of it on the iPhone by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPhone. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.
-
In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.
Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps. -
I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?
i had the same problem before using a fresh install of Windows 8.1. I have resolved this issue by running the program compatibility wizard. This I did by right-clicking on the iTunes icon in the desktop, selecting Troubleshoot compatibility, waited for it to detect compatibility issues and when presented with the following options: 1.) Try recommended settings; 2.) Troubleshoot program, I chose the latter. When asked what problems I noticed, I checked the following: "The program worked in earlier versions of Windows but won't install or run" and "The program requires additional permission"
After that, it tired to resolve the issue, and provided the necessary settings to run iTunes. Now it's running flawlessly. I have Avast anti-virus installed though.
HTH! -
why is that i can not view my warranty status? whenever i tried to put my phone's serial number itunes prompt that my serial number is not a valid one. how can i solve this issue?
https://selfsolve.apple.com/agreementWarrantyDynamic.do
-
I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on the FTP server Blog.
You haven't a problem. You simply did not read the iWeb Help :
-
My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.
2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that. -
the ipad'osby media pro' could not be synced because this computer is not authourised for purchased item that are on this ipad.how can i solve this proble,i've authourised it several times
Hello, osbybass.
Thank you for the question. This alert can mean that iTunes is recognizing applications on the iPad purchased by another Apple ID. If anyone in your household has an Apple ID, try authorizing the computer with their Apple ID and attempt to sync. If you are still experiencing issues, go through the troubleshooting steps in the attached article.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Cheers,
Jason H.
Maybe you are looking for
-
Component labels not rendering correctly after applying fusion skin
Hi I have been using ADF 11g with blaf-plus-rich skin. Recently I upgraded to 11g R1 Patch Set 1 . I applied the new fusion skin and after that labels on the components are not appearing in the right color. They are appearing in white color as the ba
-
Please help. my images/web page not displaying ( just outlines) when checking in my browser
Hi. I am using an old dreamweaver. thats not the problem. I view my web site in browser to check all ok. When i click my link to next page, it will open it in new window as it should do, but displays no images (apart from my email link) just outlines
-
I have an i-mac and using Yosemite. (1) spam e-mails keep returning after being deleted. (2) my canon P-208 document scanner will not perform. Canon does not have a compatible driver on th
-
Dotted lines for tab indents in Code View
Does anyone know how to whip DW's code view into the current century? I Specifically showing tabs in code view. Other IDE's have a great way of showing tab indenting with subtle lines. DW's approach is heavey handed and garish. IMO it's unusable in i
-
Significance of "Data Lineage" subject area in DAC
Hi, Has anyone used "Data Lineage" Subject area in DAC..? Any document/pointers on how to use this..? Thanks, Seetharam