How can I specify simple math like in a Formula Node but on the front panel?

If the Formula node had a "text" property, that would work for me, because I could limit my inputs and outputs to N floating-point numbers.
LabVIEW once had such a thing but it was in an add-on math library, and I don't remember what it was called.
Solved!
Go to Solution.

Thanks; that led me directly to what I was looking for. A combination of "Parse Formula String.vi" and "Eval Parsed Formula String.vi" works perfectly for me!

Similar Messages

  • How can i insert to word number pages after 6 pages but considering the pages before

    how can i insert to word number pages after 6 pages but considering the pages before.

    I assume this is Microsoft Word, and you want the first six pages to have no footer, subsequent pages to have a footer showing the page number.
    1. Insert a section break after the first six pages.
    2. Insert page numbers. This will add a footer with page numbers to both sections.
    3. Unlink the section 2 footer from the section 1 footer. [Click in the footer area, uncheck Link to Previous in the Header and Footer toolbar.]
    4. Delete the page number from the section 1 footer.
    Your document will now show page numbering on all pages starting with section 2.

  • How can i stop my picture from flipping when I take it on the front camera?

    How can i stop my picture from flipping when I take it on the front camera? Need help as it's frustrating me:(

    Hmm...Double click on the Home button and try to delete the camera app then launch it again that should fix it. You can also turn off your phone and turn it back on again.

  • HT2731 I have 2 apple iPods on the same account, And they have the Same songs on them. How can I get a new account for one of them but not the other? Can I wipe the memory of 1? How would I do that?

    I have 2 iPods one I don't use anymore. I would like to make a new account for one but not the other. Is that possible? If I wipe the memory in one will the other wipe out too? How can I do all of this?

    You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
    You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

  • How can I make FF use custom visited/unvisited link colors but allow the website to choose the other text and background colors?

    websites often choose colors that I have trouble distinguishing between but overriding the other colors can cause color defects on certain websites.

    Add code like this to userContent.css in the chrome folder.<br />
    There can however still be problems with clickable elements that use background images.
    Remove that link from the history to restore that background image.
    *http://kb.mozillazine.org/userContent.css
    *http://kb.mozillazine.org/Editing_configuration
    You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
    *ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
    <pre><nowiki>a:visited, a:visited * {
    color:#CC33CC!important;
    background-color:#F8F8F8;
    </nowiki></pre>

  • How can I configure my EDIROL FA-101 in 5.1 Surround in the CONTROL PANEL?

    Hi.I own a windows 7 pc with a realtek audio system.
    I cannot configure my pc to 5.1 in the CONTROL PANEL.I've even installed the latest driver and 5.1 still doesn't show in the window,only stereo.
    I've noticed that recently someone had a similiar problem at http://h30434.www3.hp.com/t5/Desktop-PC-Sound-and-Audio/How-do-I-configure-5-1-surround-on-s3480a/m-...  but I dont get a 'SUPPORTED FORMATS' window where you get a DOLBY STEREO option to select.
    Please help.
    Regards,
    Richard Steed

    If you use the JDBC driver that's included in the AS/400 Toolbox for Java you don't need to use ODBC at all, you can access the AS/400 directly. See this link:
    http://www-1.ibm.com/servers/eserver/iseries/toolbox/

  • Can I build a XY chart control to define a spline on the front panel

    Dear LabView users,
    I would like to replace a 2d numeric array control with a XY chart where the users could drag data points on the chart to create the spline of their choice. Is this possible?
    best regards
    Richard Elliott
    Cardiff University

    I think you will be better off using an XY graph and events for mouse clicks.
    http://sine.ni.com/apps/utf8/niepd_web_display.display_epd4?p_guid=E64297151FA72B7DE034080020E74861

  • How can I make a pdf-file of the front panel?

    I like to make a pdf-file of the front panel. Thus I need a vi, where I can input the printer name (as the pdf-printer is not the default one), the vi and the name of the future pdf-file.
    Thanks, Verena

    Try this and if you were to search the forum with "pdf" as the search parameter, you'd find several postings on the same subject. One of them is here and another is here with some email addresses of individuals with existing toolkits.

  • How to: display large error note in the front panel?

    hi guys,
    When "error out" has an error, I would like to display HUGE RED TEXT in the FRONT PANEL saying: "STOP, ERROR DETECTED!"  )
    How to do that?
    Thanks for your help.
    Solved!
    Go to Solution.

    Place an indicator on the panel. Set the text to HUGE and RED, and set its value to "STOP, ERROR DETECTED!". Make it not visible. When you get an error, use the "Visible" property node to display it.
    To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.

  • How Can i specify multiple server names in rwservlet.properties  file?

    How Can i specify multiple server names in rwservlet.properties file without clustering?
    I am using oracle 10g Application server. we have 3 servers Repsvr1, RepSvr2 and RepSvr3. Now i need to configure rwservlet.properties file to point to these servers based on any running report. i got 3 keymap files with reports info.
    Sample entry in the key map file is:
    key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
    key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
    rwservlet.properties file letting me to enter only one servername. Even though i merged all 3 keymap files into 1, still i have the server name issue. If i leave the server to the default name still i am getting the below error.
    REP-51002: Bind to Reports Server Repsvr1 failed. However, i know the default rep_<servername> would be used incase we dont have SERVER=<value> parameter in the rwservlet.properties file.
    If i specify the servername in the rwservlet.properties file then only Repsvr1 reports are working fine and other 2 server reports are giving the same error like
    REP-51002: Bind to Reports Server <<Server Name>> failed.
    how can i configure the info which will work all 3 reports. 2 Port servers are invoking using oracle forms and report server is invoking using ASP pages.
    If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error, whenever i am trying to integrate all 3 to workable i am getting binding error. if i exclude the server from rwservlet.properties still i am getting the same error.

    My RELOAD_KEYMAP setting is YES only.As i said If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error.
    keymap file entries
    key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
    key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
    If i use http://server.domain:port/reports/rwservlet? cmdkey = key1 should bring the report from Repsvr1 and http://server.domain:port/reports/rwservlet? cmdkey = key2 should bring the report from Repsvr2, but i am getting an error from Repsvr2 saying that REP-51002: Bind to Reports Server repsvr2 failed.
    Only Servername Repsvr1 is in rwservlet.properties file. Now what is the best option to by pass the server from rwservlet.properties file and should be from keymap file. if i comment server name in rwservlet.properties file still i am getting REP-51002: Bind to Reports Server <<Server Name>> failed error for both keys.

  • How can i send simple message from PC-to-another device

    How can i send simple message from PC-to-another device
    just simple message (like command String) not SMS or Data File.
    I have a computer with bluetooth and the oter side is Embeded Blue
    Thanks.

    http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_AQ_Configuration.pdf
    This document details how to create triggers on a table that send out JMS messages.
    In this example, the messages are going to Oracle BAM.. your message could go to your J2EE application listening to its own topic/queue.
    an alternative idea.
    you could also just cache your lookup table with something like Oracle Coherence and than try to ensure that all changes to the lookup go through Coherence, so that you won't need to do notification from the db up to the application. the application and the lookup data management tool would be using the data grid for management of the lookup table data, and the data grid (coherence) would persist the lookup data changes back to the db.

  • I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad. How can I found out if I will be able to access all the functionality in Alice? Will I need to purchase a local plan of some sort?

    I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad to use while traveling back and forth from the U.S. to Australia, and within Australia. How can I found out if I will be able to access all the functionality of the iPad in Alice? Will I need to purchase a local plan of some sort? I have never owned an Apple product before -- I'm a newby!

    Aside form the limitation of LTE to the 700MHz and 2.1GHz bands (which rules out LTE in Europe I gather, at least as it stands now) the new iPad should let you use a GSM 3g/2g/edge network anywhere.  The CDMA Verizon model will only be able to use it's native CDMA radio band in the USA (that radio will be locked to Verizon), but it's international GSM radio is the same as the AT&T model.
    Keep in mind though that by far the cheapest option when abroad is to take advantage of free wifi as much as possible (well, that is always the cheapest option, since it is free).  I know several people who have taken their wifi-only iPads and iPad2s to Europe and said they did not find the lack of 3G really inconvenient at all as most towns had plenty of free or cheap wifi access all over the place.
    And in 3 years, your iPad will be at least 2-3 generations behind, LTE will have already been replaced by 5G or whatever the next new generation of cellular ends up being named (and the "young" kids will be wondering what the heck 3G even means or meant - dang that stuff was from the olden days!), and you can pitch that ancient piece of technology and start things all over again 

  • How can we specify the Mailbox for Notes?

    In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
    Thanks in advance.
    Message was edited by: Ekapon

    You could use the DecimalFormat or NumberFormat to do the job.
    double number 1234.567;
    DecimalForamt df = new DecimalFormat("###.##");
    String s = df.format(number);or
    double number 1234.567;
    NumberFormat nf = NumberFormat.getNumberInstance();
    nf.setMaximumFractionDigits(2);
    /* if needed.
       nf.setMaximumIntegerDigits(value);
       nf.setMinimumFractionDigits(value);
       nf.setMinimumIntegerDigits(value); */
    String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

  • How can I sync my iPad to a computer after syncing it to the iCloud? I have the option of setting it up new, or restoring to a sync from many months ago. I dont want to lose any apps but I would like to back up on computer. No auto sync like other devices

    How can I sync my iPad to a computer after syncing it to the iCloud? I have the option of setting it up new, or restoring to a sync from many months ago. I dont want to lose any apps but I would like to back up on computer. No auto sync like other devices.

    Plug it into your computer. Tell it to sync with "this computer" instead of iCloud. You shouldn't have to remove any apps. Otherwise, you can save the app data by using i-FunBox ( http://www.i-funbox.com/ ) just go to the "devices" tab and select 'user applications' and select all of your apps and tell iFunBox to "copy to pc" you're done! You have them all backed up.

  • How can I specify the default tab in a CHM Output?

    My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
    I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
    So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

    Hi there
    This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
    Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

Maybe you are looking for