How can I start Internet

Hi
I am using Solaris 10 I want to configure my ip address , Gateway and Dns Ip address in Solaris 10 throuh terminal mode How can I configure
and use it
pl. inform me regards
Satish

For static IP address, you need to edit following files:
* /etc/hosts - enter static IP address of your system and hostname
* /etc/defaultrouter - enter IP address of your router
* /etc/resolv.conf - enter domain name, search domain name, and name server addresses
* /etc/inet/netmasks - enter netmask if you use one
* /etc/nsswitch.conf - the "host" entry should look like "files dns"
After editing these filed, reboot the system.
Hopefully this helps.

Similar Messages

How can I start using Oracle Express Edition

Good afternoon, how can I start using Oracle Express Edition? I have it installed it but I can not enter any user or key that allows me to manage the program from the Internet. I have understood that this version is free.
Correct me I'm wrong and please do noted me. In my country this course very expensive and I'm looking to learn on my own.
Edited by: user12301712 on 03-dic-2009 9:46

Hi
During installation wizard asked you about password for SYS and SYSTEM user, you had to set it. If you forgot you can loggin to ORACLE via SQL plus without password:
c:\>SQLPLUS / sys as sysdba
after connect you can set new password for any user, for example (SYSTEM user):
ALTER USER SYSTEM identified by NEW_PASSWORD;
After this you can login to APEX (Internet enviroment)
Remember Oracle it's not only Internet frontend, it's huge tools with many functions. If you need study Oracle you need many time and zest but it is worth-while.
Yes Oracle XE is free (read licence agreement).

If it starts downloading on the ipad how can i start downloading on computer

if I have rented a movie on my ipad and it starts downloading on the ipad how can i start downloading on computer as it is taking too long via wifi

I know you need iTunes tosynchorinize your iPad, and i know ther is a connection kit (i searched internet before posting this question).
The point is:
We are on vacation. the iPad is my fathers. We have here only his iPad and my laptop. We wanted to put foto's we made with a digital camera foto's on the iPad, so i connected the iPad to my laptop, and was able to copy the foto's to the iPad. So they are on the iPad, but they cannot be viewed. Since I do not want to instll software on my laptop I do not need my self, and we see no point in buyin a connection kit for one time use, it would be great if you could just copy foto's to the iPad and then view them.
I would appreciate it very much if someone could tell me how to do this. I am not used to working with tablets.so I am used to thinking "PC wise": youo copy files to a location on your computer and then you use a program to open those files. I know it works differently on an iPad, but it woul be great if this was one option that also would be available.

SAP dispatcher status is stopped in Console how can i start it

Hi All
Help me out
*SAP dispatcher status is stopped in Console how can i start it
Dispatcher turns green to yellow suddenly and status changes to stopped and all WP elemets shows status as ended.
Alert from Syslog : SAP Basis System: Message server disconnected
Tracert : Disp+work.exe
trc file: "dev_disp", trc level: 1, release: "640"
Thu Oct 02 12:32:52 2008
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid   560 (PC with Windows NT)
relno      6400
patchlevel 0
patchno    21
intno      20020600
make:      multithreaded, ASCII
pid        736
***LOG Q00=> DpSapEnvInit, DPStart (00 736) [dpxxdisp.c   1100]
     shared lib "dw_xml.dll" version 21 successfully loaded
     shared lib "dw_xtc.dll" version 21 successfully loaded
     shared lib "dw_stl.dll" version 21 successfully loaded
     shared lib "dw_gui.dll" version 21 successfully loaded
Thu Oct 02 12:32:58 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm)          6624     (828)
DpShMCreate: sizeof(tm_adm)          2219848     (11044)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)          192000     (384)
DpShMCreate: sizeof(vmc_adm)          0     (320)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05270040, size: 2505416)
DpShMCreate: allocated sys_adm at 05270040
DpShMCreate: allocated wp_adm at 052717A8
DpShMCreate: allocated tm_adm_list at 05273188
DpShMCreate: allocated tm_adm at 052731B0
DpShMCreate: allocated wp_ca_adm at 054910F8
DpShMCreate: allocated appc_ca_adm at 05495748
DpShMCreate: allocated comm_adm_list at 05496EB8
DpShMCreate: allocated comm_adm at 05496ED0
DpShMCreate: allocated vmc_adm_list at 054C5CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 054C5CF8
DpShMCreate: allocated wall_adm at 054C5D00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2450 MB
<ES> 2449 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( home) [dpxxdisp.c   9719]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
DpMsgAdmin: Set patchno for this platform to 21
Release check o.K.
Thu Oct 02 12:33:38 2008
ERROR => W0 (pid 1500) died [dpxxdisp.c   12170]
ERROR => W1 (pid 3796) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3548) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 1464) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3368) died [dpxxdisp.c   12170]
ERROR => W5 (pid 3400) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2620) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 380) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-1500 (SIGUSR2)
ERROR => DpWpKill(1500, SIGUSR2) failed [dpxxtool.c   2468]
killing W1-3796 (SIGUSR2)
ERROR => DpWpKill(3796, SIGUSR2) failed [dpxxtool.c   2468]
killing W2-3548 (SIGUSR2)
ERROR => DpWpKill(3548, SIGUSR2) failed [dpxxtool.c   2468]
killing W3-1464 (SIGUSR2)
ERROR => DpWpKill(1464, SIGUSR2) failed [dpxxtool.c   2468]
killing W4-3368 (SIGUSR2)
ERROR => DpWpKill(3368, SIGUSR2) failed [dpxxtool.c   2468]
killing W5-3400 (SIGUSR2)
ERROR => DpWpKill(3400, SIGUSR2) failed [dpxxtool.c   2468]
killing W6-2620 (SIGUSR2)
ERROR => DpWpKill(2620, SIGUSR2) failed [dpxxtool.c   2468]
killing W7-380 (SIGUSR2)
ERROR => DpWpKill(380, SIGUSR2) failed [dpxxtool.c   2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:48 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long)               Thu Oct 02 07:03:48 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     1500 Ended         no      1   0             0
1 DIA     3796 Ended         no      1   0             0
2 UPD     3548 Ended         no      1   0             0
3 ENQ     1464 Ended         no      1   0             0
4 BTC     3368 Ended         no      1   0             0
5 BTC     3400 Ended         no      1   0             0
6 SPO     2620 Ended         no      1   0             0
7 UP2      380 Ended         no      1   0             0
Dispatcher Queue Statistics               Thu Oct 02 07:03:48 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
8
8
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          13
wake_evt_udp_now     0
wake events           total     9, udp     7 ( 77%), shm     2 ( 22%)
since last update     total     9, udp     7 ( 77%), shm     2 ( 22%)
Dump of tm_adm structure:               Thu Oct 02 07:03:48 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Thu Oct 02 07:03:48 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:53 2008
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (676) (SOFT_KILL)
Stop icman
killing process (924) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:676 HANDLE:1564)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:54 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:676 HANDLE:1564)
[DpProcDied] Process died (PID:924 HANDLE:1556)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'home'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name          -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1572
MsIDetach: detach MS-system
EsCleanup ....
Thu Oct 02 12:33:55 2008
***LOG Q05=> DpHalt, DPStop ( 736) [dpxxdisp.c   8478]
Good Bye .....
Trace from WP table DIA 1
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Thu Oct 02 12:32:59 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.19)
B New connection 0 created
M systemid   560 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    21
M intno      20020600
M make:      multithreaded, ASCII
M pid        1500
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1500) [dpxxdisp.c   1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm)          6624     (828)
M DpShMCreate: sizeof(tm_adm)          2219848     (11044)
M DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
M DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
M DpShMCreate: sizeof(comm_adm)          192000     (384)
M DpShMCreate: sizeof(vmc_adm)          0     (320)
M DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 05A70040, size: 2505416)
M DpShMCreate: allocated sys_adm at 05A70040
M DpShMCreate: allocated wp_adm at 05A717A8
M DpShMCreate: allocated tm_adm_list at 05A73188
M DpShMCreate: allocated tm_adm at 05A731B0
M DpShMCreate: allocated wp_ca_adm at 05C910F8
M DpShMCreate: allocated appc_ca_adm at 05C95748
M DpShMCreate: allocated comm_adm_list at 05C96EB8
M DpShMCreate: allocated comm_adm at 05C96ED0
M DpShMCreate: allocated vmc_adm_list at 05CC5CD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05CC5CF8
M DpShMCreate: allocated wall_adm at 05CC5D00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPSUD's password
C Connecting as /@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    9753]
C Try to connect with default password
C Connecting as SAPSUD/<pwd>@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    9753]
B ***LOG BV3=> severe db error 1033      ; work process is stopped [dbsh#2 @ 1195] [dbsh    1195 ]
B ***LOG BY2=> sql error 1033   performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1271]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9379]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server home_SUD_00 on host home (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Thu Oct 02 12:32:59 2008
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9555
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 246]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1500) [dpnttool.c   357]
Thanks in advance please help me out
Edited by: sudhakar aleti on Oct 2, 2008 12:54 PM
Edited by: sudhakar aleti on Oct 2, 2008 12:56 PM

Hi All please find the result r3trans -d
4 ETW000 r3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 03.10.2008 - 11:02:35
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Fri Oct 03 11:02:36 2008                            5494 0.005494
4 ETW000 [dev trc     ,00000] db_con_init called                                    40 0.005534
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             26 0.005560
4 ETW000 [dev trc     ,00000] Loading DB library 'dboraslib.dll' ...                33 0.005593
4 ETW000 [dev trc     ,00000] load shared library (dboraslib.dll), hdl 0        139566 0.145159
4 ETW000 [dev trc     ,00000]      using "C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll"
4 ETW000                                                                              22 0.145181
4 ETW000 [dev trc     ,00000] Library 'dboraslib.dll' loaded                         7 0.145188
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000                                                                              13 0.145201
4 ETW000 [dev trc     ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.19)
4 ETW000                                                                            2501 0.147702
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000                                                                              12 0.147714
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000                                                                              18 0.147732
4 ETW000 [dev trc     ,00000] New connection 0 created                              13 0.147745
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              15 0.147760
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                      12391 0.160151
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              12 0.160163
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              14 0.160177
4 ETW000 [dev trc     ,00000] Found ORACLE_HOME=C:\oracle\ora92 in Registry        796 0.160973
4 ETW000 [dev trc     ,00000] -->oci_initialize                                    400 0.161373
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.WE8MSWIN1252
4 ETW000                                                                           34020 0.195393
4 ETW000 [dbsloci.    ,00000] *** ERROR => Cannot connect: TNS-name missing         11 0.195404
2EETW169 no connect possible: "DBMS = ORACLE                           --- TWO_TASK = ''"
Thanks
Sudhakar A

How can I start anew with Photos and clear the (minimal) stuff it has uploaded

I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
more than I have-and of course it got stuck there, like it has for the last week.
I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
<Re-Titled By Host>

How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
It is hard to say from your post, why the migration did not succeed in your case.
by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang? Or did already the upgrade to the Photo Library fail?
If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions. (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
Can you launch Photos at all? If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

How can i start Terminal in a specific folder

how can i start Terminal in a specific folder

From the menu bar, select
 ▹ System Preferences... ▹ Keyboard ▹ Keyboard Shortcuts ▹ Services ▹ New Terminal at Folder: On
Right-click or control-click a folder in the Finder and select that item from the contextual menu.

How can I install internet explorer on my iMac?

How can I install internet explorer on my iMac?

WZZZ wrote:
Nope didn't notice that. No idea what it was doing in the list of current discussions--I guess it was one of those old threads that wakes from the dead and reappears out of nowhere.
Yep. The wonderful, wacky world of Jive.

How can I start a new paragraph within the same table cell?

In Numbers, when adding text within a table frame, how can I start a new line within the same frame (rather than advancing to the next cell)? I'd like to enter a mini-list of several items of various lengths of data.

While Wayne's answer solves your problem, another possibility is to uncheck the box at the bottom of the Table inspector for "Return key moves to next cell." If that is unchecked, the return key types a paragraph return within the cell (the same as Option Return with the box checked).
With that box unchecked, Shift Return types a soft return (new line without a paragraph break).

How can I start a second window of a second profile through the command line?

I have two profiles set up, 'default' and 'second'. If both are already running how can I start a second window of profile 'second'?
firefox -p 'second' : opens a new window of the default and,
firefox -p 'second' -no-remote : tells me that firefox is already running.

I don't think that this is possible.<br />
You need to open this second instance (Firefox profile folder) with the -no-remote command line switch and that makes it impossible to open external links via the command line or via a double-click.<br />
You can only open a link in such an instance by dragging the link on the tab bar of that Firefox window.

How can i start oracle databases? i am using Oracle 8.1.6 for linux.

when i run dbstart,it gives me following message:
Database "ora4cweb" warm started.
but when i use sqlplus,it says:
ORA-01034: ORACLE not available
i made a mistake ,i shutdown my linux before i shutdown oracle databases,how can i start oracle databases now?thanks in advance.

try it without the scripts...
login to linux as oracle
start server manager
svrmgrl
connect internal
startup
select sysdate from dual;if that works
exitcheck listener
lsnrctl
statif nothing running type
start
exitnull

How can i start my iphone 5 after it went on safemode and itunes cant help me!! i was trying to update it!!

how can i start my phone after it went on safe mode while i was updating it!! it says i need to connect with itunes but when i doo it tells me its an error !! i cant use my phone at all!!

modular747,
Had same problem, got answer from supprot community and it worked.
Hold down your power bar (on top) and your Home button (on face at bottom) for about 10 - 20 sec. and your phone will be restored - nothing lost or changed. Worked like a charm for me 20 sec ago.
Good luck

How can I get internet explorer on my macbook pro?

How can I install internet explorer on my macbook pro? Thanks!

Install Windows 7 into a virtual machine program (IE comes with it), I suggest VirtualBox as it's free and gets updates for near forever. However VMFusion and Parallels has more features but then to drop you if you don't upgrade OS X.
Windows in BootCamp or Virtual Machine?

I purchased the newest software update for my ipod touch 1st generation and it is saying it is it will now begin download but the status bar doesn't even appear? How can I start the download?

I purchased the newest software update for my ipod touch 1st generation and it is saying it is it will now begin download but the status bar doesn't even appear? How can I start the download?

Well first off you shouldn't have had to pay for a download (just an assumption from the word "purchased".
If you are trying to install iOS 5 on your iPod touch, it won't work they arent compatible. I suggest checking what version of software you are trying to install and posting it in this forum so people can have a better understanding.

HT201342 I have an icloud address but now I am told "that address is taken". How can I start to use it again?

How can I start to use my own address? It is old from .me

Welcome to the Apple community.
Unfortunately you cannot change an iCloud mail address once you have created it. You can however use an iCloud alias which you can set up at iCloud.com.
To create an alias.....
Navigate to the Mail feature at iCloud.com and click on the gear icon in the bottom left corner. Choose Preferences from the drop down menu, then select accounts from the options across the top, here you can create your alias.

How can i start the web analyzer to look the report

HAi
I created a query in Bex. And then i created the 'Web templates' for this query in WAD.
Now how can i start the Web Analyzer to look this query in the web. I want to see only through web analyzer.
So pls tell me how can i start the web analyzer. i mean step-by step method for opening the web analyzer and to look the report.
thnaks
kumar

Hi Ravi.
The web analyzer is not used to open templates created in the WAD. If you want to open the query in the web analyzer you should open it by calling the 0ANALYZER template ID. I.e. http://server.domain.com:port/sap/bw/BEx?cmd=&template_id=0ANALYZER&sap-language=EN
Alternatively you can open the web template created in the WAD in the browser by clicking "Execute in the Browser..." or just enter the template ID in the URL provided above.
Hope it helps (assign points if helpfull!).
BR
Stefan.

How can I start Internet

Similar Messages

Maybe you are looking for