How can I start multiple Labview build executables in a sequence

I need to start several executables in a certain order with pauses between them.
How is this done.

Why don't you make a new vi which contains a sequence structure and their you put in the program you want to run first (inserting a sub.vi) and then a pause or the second program and so on.
I attached a screenshot by which i think you want to have your program.
If you want to open other executables (for example ms exel and after few seconds open ms word) then its also possible to use the sequence structure.
I hope i understand the question correctly, and this will help you solve your problem
Attachments:
sequence.JPG ‏24 KB

Similar Messages

How can you start the tag config editor from a vi or when labview starts?

how can you start the tag config editor from a vi or when labview starts?

Hi,
There is a VI called "dsc_TagEditorLauncher.vi" under "C:\Program Files\National Instruments\LabVIEW 7.1\project\lvdsc" folder that can be used to launch the TCE programmatically. I hope this helps.
Best Regards,
Remzi A.
Applications Engineering
National Instruments

How Can I Use Multiple Weblogic Instances in a Single OS

Hello Everyone,
Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle Enterprise Linux 5.
Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
The main problem here is :
In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
What might be the issue?
I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
Can anyone suggest a resolution for this please ?
Thanks in advance.

Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS

How can I scan multiple pages to one file with MG 7120

My printer does not have ADF. How can I scan multiple pages to one file on my MG 7120?

Hi albabynyr,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single file. To scan using the IJ Scan Utility, please follow these steps:
1. Start IJ Scan Utility by going to your Start menu, then selecting All Programs, then Canon Utilities, then IJ Scan Utility (folder), then IJ Scan Utility (program).
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
3. Click the DOCUMENT SCAN option on the left pane of the window.
4. In the right pane of the window, locate the SELECT SOURCE field and select the DOCUMENT option.
5. Set the color mode, document size, and scanning resolution as required in the rest of the fields shown in the window. Click DOCUMENT SCAN ORIENTATION SETTINGS... to specify the orientation of the documents to be scanned.
6. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the DOCUMENTS folder.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. After a page has scanned, the screen to continue or end scanning appears. If you have more pages to scan, place the next page on the platen and click Scan. Do this each time a page has completed scanning. After the last page has been scanned, click Exit. Scanned images are saved in previously selected folder location specified in the SETTINGS... window. Click the CANCEL button to cancel scanning if needed during scanning.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How can I send multiple string commands into a VISA write?

Hi Fellow LabVIEW users
I am very new to LabVIEW (2.5 months) so please forgive me if my lingo is not up to par.
How can I send multiple string commands to a VISA write. For example each string command looks like this
1) 3A00 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0033 (Scenario 1)
2) 3A01 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0034 (Scenario 2)
3) 3A01 0000 0000 33FF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0067 (Scenario 3).
and so on and so forth. And there are a number of scenarios.
Each String scenario will give a different string output which will be interpreted differently in the front panel.
Right now I have to manually change the string commands on the front panel to give me the desired output. How can I do this without manually changing the commands i.e. hard coding each scenario into the block diagram?
Thanks, any feedback will help.
mhaque

Please stick to your original post.

How can I export multiple PDF fillable forms into a spreadsheet (Excel) using VBA?

Hi guys,
I never used VBA with with Adobe Acrobat. I would like a tip to start doing that. What I would like to do know is:
1 - I have multiple PDF Forms that are filled.
2 - I want all the data from those forms to be exported to Excel via VBA code.
3 - Adobe Acrobat already have an option to do that manually (Forms > Merge Data Files Into Spreadsheet) and it works perfectly.
4 - I would like to access that feature using VBA, then generate a spreadsheet.
Any tips? How can I start?
Thanks!

A good place to start is Karl Heinz Kremer's blog, where he has a few examples:
http://khkonsulting.com/2010/09/reading-pdf-form-fields-with-vba/

How can I maintain multiple white spaces in a PDF written from InDesign?

I need to have 2 white spaces maintained (within a part #) in the PDF I write, but when I open in Acrobat it converts it to one space.
I've tried word spaces, set spaces and applying "no color" to a placeholder character and nothing is working!
Any ideas or suggestions?

I am talking about normal white space. Multiple fixed widt spaces are not a problem. How the space is handled in a PDF depends on how it is created.
Viele Grüße
Wilhelm Georg Adelberger
Von meinem iPhone gesendet
Am 21.08.2014 um 12:01 schrieb Peter Spier <[email protected]>:
How can I maintain multiple white spaces in a PDF written from InDesign?
created by Peter Spier in InDesign - View the full discussion
It may not be a great idea to use multiple spaces, but it certainly is not prohibited and sometimes is necessary -- you might want a 2em space, or a thin space before and after a tab you underline in a form.
I'm able to select the multiple spaces just fine in Acrobat 9 using the text touch-up tool.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6661037#6661037
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How can I insert multiple page contents in the page layout properly?

I wanted to create 4 columns on the page layout. These 4 columns are of page contents.
After creating new web page based on that page layout, I attempted to enter 4 different inputs on all 4 columns.
Then, the result (from all columns) becomes the same.
Image - edit the web page based on 4 columns page layout:
Image - after edit & save:
How can I insert multiple page contents in the page layout properly?

First, I copied the HTML snippet for the Page Content on Sharepoint's Design Manger. The code of Page Content HTML snippet is shown below:
<div data-name="Page Field: Page Content">




<div id="ctl02_label" style="display:none">Page Content</div>
<div id="ctl02__ControlWrapper_RichHtmlField" class="ms-rtestate-field"
style="display:inline" aria-labelledby="ctl02_label"><div align="left"
class="ms-formfieldcontainer"><div class="ms-formfieldlabelcontainer"
nowrap="nowrap"><span class="ms-formfieldlabel"
nowrap="nowrap">Page Content</span></div>
<div class="ms-formfieldvaluecontainer"><div class="ms-rtestate-field">
Page Content field value. Lorem ipsum dolor sit incididuntet dolore.</div>
</div></div></div>


</div>
After I published the page layout, I found the code for Page Content from its ASPX page. The code is shown below:
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/></div>
So, I attempted to create 4 columns by using 4 HTML snippets of Page Content on the same page layout. The page layout is generated from HTML file to ASPX file.
Then I edited some parts in ASPX page layout:
<asp:Content runat="server" ContentPlaceHolderID="PlaceHolderMain">
<table>
<tr>
<td style="width:70px;"> </td>
<td style="width:250px; text-align:right;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:40px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:175px;"> </td>
</tr>
</table>
</asp:Content>
The 4 columns for Page Contents appeared on the web page when I created new page using that page layout. But the problem is that all 4 columns displayed the same result from 4th column.

How can we handle multiple applications in session method

how can we handle multiple applications in .. session method.
can any body reply me.
thanks

Hari,
hi Check out this sample code to use session method
REPORT ztest_report
NO STANDARD PAGE HEADING
                        LINE-SIZE 255
                        MESSAGE-ID ZRASH.
                Internal Table Declarations                          *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
         KUNNR(10),
         BUKRS(4),
         KTOKD(4),
         ANRED(15),
         NAME1(35),
         SORTL(10),
         STRAS(35),
         ORT01(35),
         PSTLZ(10),
         LAND1(3),
         SPRAS(2),
         AKONT(10),
       END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
         KUNNR(10),
         EMSG(255),
       END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
         KUNNR(10),
         SMSG(255),
       END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
       V_TLINES LIKE SY-TABIX,
       "For storing total records processed.
       V_ELINES LIKE SY-TABIX,
       "For storing the no of error records.
       V_SLINES LIKE SY-TABIX.
       "For storing the no of success records.
         Selection screen                                            *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
             V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
         Start-of-selection                                          *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
       TOP-OF-PAGE                                                   *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
         End of Selection                                            *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*&      Form form_uploadff
    Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = LV_FILE
    FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = 'X'
    HEADER_LENGTH                 = 0
    READ_BY_LINE                  = 'X'
    DAT_MODE                      = ' '
IMPORTING
    FILELENGTH                    =
    HEADER                        =
    TABLES
      DATA_TAB                      = IT_FFCUST
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
    DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
    DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM.                    " form_uploadff
*&      Form Form_bdcgenerate
    Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
    PERFORM POPULATEBDC USING :
                                'X' 'SAPMF02D' '0105',
                                ' ' 'BDC_OKCODE' '/00' ,
                                ' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
                                ' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
                                ' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
                                'X' 'SAPMF02D' '0110' ,
                                ' ' 'BDC_OKCODE' '/00',
                                ' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
                                ' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
                                ' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
                                ' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
                                ' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
                                ' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
                                ' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
                                ' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
                                'X' 'SAPMFO2D' '0120',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0125',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0130',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0340',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0360',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0210',
                                ' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0215',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0220',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0230',
                                ' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
    CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
    MESSAGES INTO IT_CUSTMSG.
    IF SY-SUBRC <> 0.
*--Populating the error records internal table.
      IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_ERRCUST.
      CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
      IF V_FLAG1 = ' '.
        PERFORM FORM_OPENSESSION.
        V_FLAG1 = 'X'.
      ENDIF.
*--Inserting the error records into already open session.
      IF V_FLAG1 = 'X'.
        PERFORM FORM_INSERT.
      ENDIF.
*--Populating the Success records internal table.
    ELSE.
      IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_SUCCUST.
      CLEAR IT_SUCCUST.
    ENDIF.
*--Displaying the messages.
    IF NOT IT_CUSTMSG[] IS INITIAL.
      PERFORM FORM_FORMATMSG.
    ENDIF.
*--Clearing the message and bdc tables.
    CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
    PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM.                    " Form_bdcgenerate
*&      Form populatebdc
      FOrm to Populate the BDC table.
FORM POPULATEBDC USING    VALUE(P_0178)
                           VALUE(P_0179)
                           VALUE(P_0180).
IF P_0178 = 'X'.
    IT_CUSTBDC-PROGRAM = P_0179.
    IT_CUSTBDC-DYNPRO = P_0180.
    IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
    IT_CUSTBDC-FNAM = P_0179.
    IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM.                    " populatebdc
*&      Form FORM_OPENSESSION
      Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
   EXPORTING
     CLIENT                    = SY-MANDT
     GROUP                     = LV_SESNAM
     HOLDDATE                  = '20040805'
     KEEP                      = 'X'
     USER                      = SY-UNAME
     PROG                      = SY-CPROG
IMPORTING
   QID                       =
   EXCEPTIONS
     CLIENT_INVALID            = 1
     DESTINATION_INVALID       = 2
     GROUP_INVALID             = 3
     GROUP_IS_LOCKED           = 4
     HOLDDATE_INVALID          = 5
     INTERNAL_ERROR            = 6
     QUEUE_ERROR               = 7
     RUNNING                   = 8
     SYSTEM_LOCK_ERROR         = 9
     USER_INVALID              = 10
     OTHERS                    = 11
IF SY-SUBRC <> 0.
    WRITE :/ 'Session not open'.
ENDIF.
ENDFORM.                    " FORM_OPENSESSION
*&      Form FORM_INSERT
      fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE                  = 'FD01'
    POST_LOCAL             = NOVBLOCAL
    PRINTING               = NOPRINT
    SIMUBATCH              = ' '
    CTUPARAMS              = ' '
    TABLES
      DYNPROTAB              = IT_CUSTBDC
    EXCEPTIONS
      INTERNAL_ERROR         = 1
      NOT_OPEN               = 2
      QUEUE_ERROR            = 3
      TCODE_INVALID          = 4
      PRINTING_INVALID       = 5
      POSTING_INVALID        = 6
      OTHERS                 = 7
IF SY-SUBRC <> 0.
    WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM.                    " FORM_INSERT
*&      Form FORM_CLOSESESS
      Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM.                    " FORM_CLOSESESS
*&      Form FORM_FORMATMSG
      Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
      ID        = SY-MSGID
      LANG      = SY-LANGU
      NO        = SY-MSGNO
      V1        = SY-MSGV1
      V2        = SY-MSGV2
      V3        = SY-MSGV3
      V4        = SY-MSGV4
    IMPORTING
      MSG       = LV_MSG
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS    = 2.
IF SY-SUBRC = 0.
    WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM.                    " FORM_FORMATMSG
*&      Form form_writeop
      To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
           / 'No of Error Records :',V_ELINES,
           / 'No of Success Records :',V_SLINES,
           / 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM.                    " form_writeop
Don't forget to reward if useful..

How can i start the web analyzer to look the report

HAi
I created a query in Bex. And then i created the 'Web templates' for this query in WAD.
Now how can i start the Web Analyzer to look this query in the web. I want to see only through web analyzer.
So pls tell me how can i start the web analyzer. i mean step-by step method for opening the web analyzer and to look the report.
thnaks
kumar

Hi Ravi.
The web analyzer is not used to open templates created in the WAD. If you want to open the query in the web analyzer you should open it by calling the 0ANALYZER template ID. I.e. http://server.domain.com:port/sap/bw/BEx?cmd=&template_id=0ANALYZER&sap-language=EN
Alternatively you can open the web template created in the WAD in the browser by clicking "Execute in the Browser..." or just enter the template ID in the URL provided above.
Hope it helps (assign points if helpfull!).
BR
Stefan.

How can I add multiple, successive destinations in "Maps" such as on a delivery trip with several stops ?

How can I add multiple, successive destinations in"Maps" such as on a delivery trip with multiple stops and so needing driving directions i.e. set up a route ?

Maps help:
Mark a location with a pin
You can drop a pin on a location to get directions or help you find it again.
Open Maps
On your map, go to the location you want to mark with a pin.
Choose View > Drop Pin. If the pin isn’t exactly where you want it, put the pointer on it and hold down the button until the pin “hops.” Drag the pin into place, then release the button.
To see information about a location, click its pin, then click the Info button. To close the Info window, click outside of it.
To remove a pin, select it, then choose View > Clear Pin.
Get directions
Using Maps, you can get directions to help you navigate on foot or behind the wheel. Once you've decided where you're going, click the Share button to send your map and directions to your iPhone. (Your iPhone must have iOS 7 and be signed into the same iCloud account as your Mac.)
Open Maps
Do one of the following:
Click Directions to open the directions sidebar, then enter the starting and ending locations.
On the map, click a pin to display its info banner, click the info button to see more info, then choose “Get Directions.” (If your starting location doesn't have a pin, you can Control-click or tap it with two fingers, then choose Drop Pin.)
Click either the car (driving directions) or person (walking directions).
If multiple routes appear on the map, click the one you want to take.
To zoom in on a turn, click it in the directions sidebar.
To close or reopen the directions sidebar, click Directions in the toolbar.

How can I make multiple pictures slowly fade to white in FCP X ?

I am new to FCP X and I'm creating a picture slideshow. How can I make multiple pictures slowly fade to white in FCP X ?
For example, I would like to have 10 pictures all play in 5 seconds, and starting off with the 1st one being little light; 2nd lighter; 3rd lightter; etc., to 10th being completly white screen...
Can anyone help ?

Here is what I would do. Add a 5 second white generator solid to your storyline. Add your 10 half second clips as attached clips. Select them all, right click and make a compound clip. Then keyframe the compound clips opacity from 100% t0 0% with one keyframe at the beginning and one at the end. That will give you a linear reduction in opacity over the 5 seconds(10 pics). You can play with the keyframes to get the effect you want if linear isn't doing it.

How can I start the program without the run button

How can I start the program the instant i open the vi?
without the use of Run.
Thanks
Solved!
Go to Solution.

Under vi properties, execution, click run when opened like in Jeff's screen capture below . Don't post any code set to run when opened to the forums!
=====================
LabVIEW 2012

How can I start install the design on FPGA

hi ,
i design a system on the labview 8.2 thats detect some parameter of the ECG signal , now i wnat to install the design on the FPGA kit
kown the input signal is real time ECG signal .
how can i start doing this ?
what the needed informaton to do that ?
thank you

Hi - I just want to clarify that National Instruments does not make any signal conditioning modules or other products that are designed for direct connection to a human subject (we don't design or certify to the required medical safety standards). Our products are often used in conjunction with amplifiers or signal conditioners that are designed for these applications that have outputs that are filtered, isolated, and amplified and are ready to be digitized by a DAQ board or other NI product.
If used on animals, these safety concerns are often not as big an issue, but you still need a specialized signal conditioner that has a relatively high gain and balanced differential inputs (with high common-mode rejection) to acquire a good, low-noise ECG signal. This is similar to a thermocouple type input module, but with more bandwidth than a typical thermocouple module and AC coupling.
Bottom line: you really need to use a specialized biosignal amplifier that has a single-ended analog output to connect to NI DAQ boards or FPGA boards.
Steve J.
National Instruments
Visit the NI Biomedical User Group at:
www.ni.com/biomedusers

How can I have multiple users on iTunes (in order to connect to a shared office iPad)?

How can I have multiple users on iTunes (in order to connect to a shared office iPad)? Currently each of us has our own iTunes account, so I've made an "all office" Apple ID. However, I can't seem to get two different accounts (my personal and the office) to work on my machine. Even when I login as "the office", my personal library is still showing. Additionally, when I try to setup with a first-time use in iTunes, I get an error that I don't meet the minimum age requirement - no matter what birthdate I enter!

The library exists regardless of which user is logged in.
The only way around that is to create different user accounts on the computer.
There is no way to have 20 unique iTunes users access a shared iTunes under a single login on the computer.

How can I start multiple Labview build executables in a sequence

Similar Messages

Maybe you are looking for