How can i start my iphone 5 after it went on safemode and itunes cant help me!! i was trying to update it!!

how can i start my phone after it went on safe mode while i was updating it!! it says i need to connect with itunes but when i doo it tells me its an error !! i cant use my phone at all!!

modular747,
Had same problem, got answer from supprot community and it worked.
Hold down your power bar (on top) and your Home button (on face at bottom) for about 10 - 20 sec. and your phone will be restored - nothing lost or changed.  Worked like a charm for me 20 sec ago.
Good luck

Similar Messages

  • HT201210 how can i enable my device after it has been disabled and itunes wont connect to it?

    itunes wont connect to my device because it has a passode set. but i can not disable the passcode because my device is disabled. what can i do about it?

    Put iPhone into Recovery Mode. Open iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Click the Restore button of iTunes.

  • HT4623 How can I activate my iphone after i upgraded it?

    How can I activate my iphone after i upgraded it?

    riveranaruth  see the thread you started
    https://discussions.apple.com/thread/4868478

  • HT4993 How can i unlock my iPhone after ending a contract?

    How can i unlock my iPhone after ending a contract?

    If it's locked to Sprint and you're not a Sprint customer, you're out of luck. They will not unlock it for you. Sell it to someone in the US who can use it and buy a phone you can use.

  • HT201365 How can I recover my Iphone after I erase it?

    How can I recover my Iphone after I erase it because I erase my Iphone from find my Iphone and I can't activate it agin.

    Why can't you activate it again? Plug it into your computer and restore it if nothing else works.

  • HT1430 How can I restart my iphone 4 with no sleep button and frozen apps?

    how can I restart my iphone 4 with no sleep button and frozen apps?

    So, I called support this morning, if this happens to you, call them.
    There's nothing you can do on your own at this point (without voiding a warranty.)

  • I cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

    i cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

    See this support document for information about update and restore errors. Resolve iOS update and restore errors

  • How can you start up your ipod if holding the hold and home button does not work?

    how can you start up your ipod if holding the hold and home button does not work?

    Remi,
    How long did you hold these buttons for? Did you try more than once?  Have you tried letting it charge for a bit and trying again?
    If nothing else, see this article for more troubleshooting assistance.
    http://support.apple.com/kb/TS2771
    B-rock

  • How to disable passcode on iphone if you forgot the paascode and you cant upload on itunes computer

    how to disable a passcode from iphone if you forgot the passcode and you cant load on iTunes computer?

    You'll need the passcode to disable passcode.
    Forgot or Wrong Passcode
    http://support.apple.com/kb/HT1212
    Forgot Passcode use recovery mode to restore
    http://support.apple.com/kb/HT1808

  • How can I unlock my Iphone after I have use my finding my Iphone icon and I have follow all the step to recover my Id apple and password.

    I 'm trying to unlock my 5s iphone  I was trying the icon Find my Iphone. And I  was luck and now I dont remenber my id apple or password. But I did look in to the instruction above in how to use again my phone. But nothing happen. What can I do to put back my phone to work again.

    How does one forget their Apple ID?  That simply sounds fishy.
    Reset the password by going to https://iforgot.apple.com/password/verify/appleid

  • HT1386 How can I start an iPhone if it does not respond to the itunes?

    I have a iphone 3G and it was jailbroken. Now when i want to restore it and update it to iOS 5 it is not responding. It was in recovery mode before whe i plugged into the computer but now it is not even responding with the itunes.How can i resolve this problem?

    gaganpreet singh wrote:
    I have a iphone 3G and it was jailbroken.
    Thanks for playing, but discussion of jailbroken devices is prohibited here.

  • How can i restore my iphone after a failed update

    i tried to update my iphone and it gave an unknown error message with code (1015) which rendered the phone useless unless i restore. then i tried restoring it but gave the same error message after its almost done. please help me on how to restore my iphone even if its without the update.

    See: http://support.apple.com/kb/TS3694#error1015
    That error usually means that either:
    You are trying to downgrade the phone to an earlier version
    You don't have the latest version of iTunes
    Your phone has been hacked or jailbroken in the past

  • How can i boot my iphone after erasing using findmyiphone

    I accidentally erased my iphone using find my iphone and removed it also. now it says sim pin locked. how can i boot it again normally?

    Hello Mr.MacMac,
    It sounds like you are trying to restore your device but you are seeing a message about the Sim Pin being locked. I recommend the information in the following article:
    iOS: Understanding the SIM PIN
    http://support.apple.com/kb/ht1316
    You can enable, disable, or change your SIM PIN in the following locations:
    iPhone: Settings > Phone > SIM PIN
    iPad (Wi-Fi + Cellular models): Settings > Cellular Data > SIM PIN
    Note: Some carriers provide SIM cards with a default SIM PIN already enabled. Contact your carrier to find out what your default SIM PIN code is.
    Restoring
    When restoring the device, you will need to unlock the SIM card to complete the restore process. The device and iTunes display the following prompts to notify you:
    To complete the restore process:
    Disconnect the device from your computer.
    Tap Unlock on the device.
    Enter the SIM PIN to unlock the SIM card.
    Reconnect the device to your computer.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How can I unlock my iphone after it was wipe by the cloud

    My phone was wipe remotely by the icloud.  How can I reset it to be used without the persons Apple id and password.

    This is not a flaw in the system. It is a theft deterent that meant to render the device useless and it works well.
    If this was a company phone then it should be setup as a managed device with Apple Configurator or some other MDM (Mobile Device Management) software. This would have prevented the situation you now have.
    In short, Activation Lock cannot be removed without the Apple ID & password of the account it is locked to.
    You can try to contact Apple but they most likely, they can't/won't help.
    Apple Support Numbers

  • How can i recover my iphone after i remote lock it

    i bought my phone from a friend so it isnt register but i remote lock it how can i recover it

    http://support.apple.com/kb/HT2526

Maybe you are looking for

  • My complaint and poor customer service from BT

    I am posting a reduced version of the complaint i sent to BT, partly because i would like to know if anyone else has had the same problem and partly in the hope that someone here will see it and be able to help me with the problems i am having. Here

  • How do i rotate photos in mail 2.1.3

    how do i rotate photos in mail 2.1.3   OSX 10.4.11

  • Suggestion for a much needed app

    I am a volunteer firefighter. I am dispatched to calls via a Motorola Monitor voice pager. Since approximately 84% of firefighters in the U.S. are volunteers, and the vast majority of them use the same system that my department does, an app that woul

  • Problem Displaying images

    Hi I am trying to make a mud and the one thing I wanted to make different was an actual image map. My code reads the map from a text file and then places it into an array which then is displayed using diffent images for different characters. I wanted

  • SAPScript: logo color in Print Preview ???

    Hi all, when i am viewing the logo in SE78 it is coming with proper Color, but as i am viewing the same logo in Print Preview of Layout, it is appearing without color with distored image. Any Ideas?? Thanks in advance.