How can I startup from my hard drive instead of Darwin/BSD screen?

Hi,
I have read most of the forum that was discussed regarding about the darwin/bsd screen. I still can not find the solution to solving my problem.
After using the Disk Warrior disc as a startup to fix the directory, and restarting the computer. It startup from the Disk Warrior disc again. After i took out the disc, this is when the darwin/bsd screen appears.
I had tried the following:
pressing OPTION KEY while it boots up, still wont recognize the HD
pressing C KEY while it boots up, still wont recognize the HD
pressig the SHIFT key while it boots up, still wont recognize the HD
Also, I had misplaced the disk utility disc..
can someone tell me how to resolve this situation..
desepartely seeking help

Hi!
I am not sure if you have seen this solution to Darwin/BSD screen, but it has worked for others: http://discussions.apple.com/thread.jspa?threadID=320663&start=15&tstart=0
If Option booting does not get you to boot off your external boot drive there a couple of things I can think of:
1. Hold down the "X" key from a cold start while you hit the power button.
2. Boot from the Installer CD, then go to the Installer Menu and choose startup drive.
3. A third, for good measure. It never hurts to Reset the PRAM, and often helps. Reset PRAM (from a cold start hold down Command + Option + P + R while hitting the power button and holding for 3 chimes. Release and allow to boot.
Hope at least one of these help.
Good luck.
cornelius
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS (10.4.4)   Mac OS X (10.4.5)   Beige G3 OS 8.6

Similar Messages

  • Activation: how can I recover from a hard drive crash?

    My hard drive crashed on me...  All my data is safe, but now I have to figure out how to reactivate both Lightroom 3 and CS3.
    I have rebuilt the failed machine with a new hard drive, but it was getting rather old so I also took the opportunity to purchase a new machine.  My intention is to get Lightroom and CS3 installed and registered on the new machine.  I understand that under normal circumstances I could deactivate Adobe products on the old machine, install and reactivate on the new machine.  But since I rebuilt it, the old machine doesn't actually have Lightroom and CS3 installed and activated -- no activation, so no chance to deactivate.
    I see two options.  Which is easier?
    I could reinstall both Lightroom and CS3 on the old machine, activate them, then deactivate them, then install and activate on the new machine.  If I reinstall and reactivate on the old machine, will Adobe's activation service recognize that I'm reactivating on a machine that already had Lightroom and CS3 installed (everything is the same except the hard drive)?  If not, will I be able to activate since I will be trying to activate an already-activated license?
    Alternately, I could just install on the new machine and attempt to activate there.  I expect I'll run into problems, again because I'm trying to activate with a key that was used to activate on a different system.  I expect I'll have to phone into Adobe to clear this up.
    I'm concerned that if I take the wrong path it will make it more difficult to get everything working in the end, possibly to the point where Adobe will refuse to allow me to activate my licences on my new machine.  Does anybody have any advice?
    Thanks.

    Since CS3 is not a shipping version there is NO activation needed, only the current shipping version. Install CS3 and insert the serial number.
    Do the same with LR. No install, uninstall, gymnastics needed nor phone calls to Adobe Tech Support.
    I did this when my power supply shorted and took the whole machine up in smoke, all four hard drives worth. When I got the new computer I just installed CS2 with the license and no activation needed.
    Rich

  • How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

    How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
    I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
    Someone, Please help

    Hi Allen,
    Is there any way to store the back up to Mac and restore after formating?

  • How can a format an external hard drive to Fat 32 format

    how can i format an external hard drive to a Fat 32

    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to MBR then click on the OK button. Set the format type to MSDOS (FAT)  Click on the Partition button and wait until the process has completed.

  • How can i reformat my external hard drive without loosing any data?

    how can i reformat my external hard drive without loosing any data?

    Welcome to the Apple Support Communities
    It's impossible to format a hard drive without losing the data. One thing you can do before formatting is to copy the files from the external drive to your internal drive, and then, format the external drive. After formatting, copy the files to the external drive again, and everything will be as before formatting it

  • How can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

    Hello everyone, how can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

    OK. Start with:
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Click on the Erase tab in DU's main window. Select one of the two partitions, preferably the first one, change the Format type: to MSDOS then click on the Erase button.

  • Changed hard drive... How do I transfer from old hard drive to new hard drive

    hanged hard drive... How do I transfer from old hard drive to new hard drive.
    I have installed the new hardrive on my macbook and reinstalled the software... how do I transfer the information form the old drive to
    the new one.
    ?can I put the old drive in another macbook and connect via firewire???
    Thanks

    Put the old hardrive in an external hardrive case....like this...
    eshop.macsales.com/shop/firewire/on-the-go
    .....this is just an example their are less expensive models....

  • How can I use a firewire hard drive on a new Macbook with one USB-C only?

    How can I use a firewire hard drive on a new MacBook with only one USB-C?

    kaz-k is correct about FireWire not being supported by any possible connector or adaptor to USB-C and never will.  However, there is no such thing as a FireWire Hard Drive.  There are only SATA (or if it is a really old one, ATA,) drives in a FireWire enclosure.  If you can remove the drive from the case/enclosure - bust it open somehow if it is a glued-up unit - then the drive can be placed into a regular USB3 enclosure. Then it can connect to the new MacBook via any one of the adaptors Apple sells.

  • How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.

    How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.

    You can't unless you have a bootable system on an external drive you can use. Otherwise, you need either the original disc that came with your computer or a retail copy of Snow Leopard DVD. The latter contains 10.6.3, so your model must be capable of booting from that or an earlier version of OS X.
    You can purchase replacement discs from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.

  • HP Pavilion 500-210 QE Can't boot from any hard drive.

    Good Evening. As you can see from the subject, my computer just can't boot from any hard drive that I put on it. I tried swapping the power supply, the SATA cable, resetting the BIOS, enabling legacy boot, changing from AHCI to IDE and RAID... 
    When I get to the BIOS setup, I can see the hard drive and its specifications, but it just won't boot or show up when I'm trying to install a new OS. I'm not an expert, but I think the problem might be in the motherboard SATA ports, but I'm not sure. Just to make sure, I did try another hard drive and it didn't work aswell. 
    I was also thinking about buying an external hard drive and instaling my OS on that, but I don't even know if that's possible and I would really like to have my computer working again.
    Thank you for your attention!
    This question was solved.
    View Solution.

    What is the installed operating system?
    Did you make a recovery disk set?
    Did you happen to make a  Windows 8.1 startup disk or USB recovery thumbdrive?
    Have you tested the hard disk?
    Press the power button and then immediately tap the Esc key. In the Startup menu, choose F2 for Diagnostics. In the HP Basic System Diagnostics menu choose hard disk. Run the test and post the results here.
    The issue you are facing has nothing to do with the SATA ports. It is a configuration issue. Your PC is a modern one and its BIOS (UEFI) is far more advanced than what you may have seen before.
    If you want to install a different operating system then you will have to make a few changes in the BIOS configuration. Secure Boot is turned on by default for Windows 8 and Windows 8.1. If you try installing a different OS without turning this off then your system won't boot up. You may be running into this if you are trying to install another operating system.
    The image below is  what will be seen in the BIOS of your PC in the security tab --> . In the secure boot configuration options do not clear the secure boot keys! Those keys are your operating system license activation keys.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How can my daughter use the hard drive in the Time Capsule ...

    So, I am in Oklahoma and my daughter is in Tennessee...
    She has a Time Capsule where the Wi-fi base station quit working, but the hard drive may be OK.
    She bought an Airport Express to use as a wi-fi router.
    The question, then, is:
    How can my daughter use the hard drive in the Time Capsule to do Time Machine backups?
    Thank you very much for your insights.
    Roberto

    It can be done but is very messy. That is assuming the TC is still functional which I kind of doubt.. the wifi is seldom the only thing that will die .. so whatever problems it has the wifi would be the least of it.
    Anyway.. do a factory reset to get started.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    If the LED is not lit then the TC is dead, not just the wireless.
    The setup for using the TC is explained in the bottom of this thread.
    TC in a second local network.
    https://discussions.apple.com/thread/4817218?tstart=30
    The idea is to set the TC to provide router function.. and the computer plugged in by ethernet to as a second network.. but there are rules on how this is done which I have explained in that thread.
    I notice that Mountain Lion deals better with order of network priority than Snow Leopard used to .. so it might not need to have manually set gateway and dns.. although I would still recommend it. It simply stops the second network causing issues.
    It is much easier to simply purchase an external drive and plug that in.
    It is cheaper, faster and more reliable than using the TC for TM anyway.
    Plus a lot of the later machines no longer have ethernet ports.. and using dongles is far from neat.. although thunderbolt to ethernet is IMHO necessary accessory for anyone without ethernet.

  • How can I use my external hard drive for my iphoto instead of my mac book pro memory?

    i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • HT1923 hi, my mac air is really low on disk space, can i remove iTunes (which is huge) to an external hard drive to free up space and then just run it from the hard drive. instead of taking space on the mac? even if the mac no longer has enough to accommo

    Hi, my mac air is really low on disk space, can I remove itunes (which is huge) to an external hard drive to free up space?...and then run it from the hard drive instead of the mac,even if the mac no longer has space to accomodate the size of the library?

    Yes.
    Copy your music iTunes Library folder to the external drive and change the Advanced settings in iTunes to point to this new location.
    Once you're happy with these changes you can delete the same Library from your User account to free up space on the internal drive.

  • How can I backup an external hard drive using Time Machine?

    How can I backup an external hard drive connected to my MacBook Pro using Time Machine?

    Attach drive, open Time Machine preferences, be sure external drive is not in the Exclude list.

  • How can i add an external hard drive to my time capsule

    How can i add an exteranl hard drive to my time capsule

    yes, plug a USB drive .. correctly formatted.. in.

Maybe you are looking for