How can I stop an action sequence with another
Hi,
I am quite new to flash catalyst. I made a side with an office where you can click the phone to go to the status "phone". In there you should be able to call some virtuell people. I made buttons with names that trigger different action sequences with showing the name of the called person in the display and playing a sound file that sounds like a call. Now my problem is when I am clicking a different name while it is still in one action sequence, the other one shows up over the first and both sounds are playing at the same time.
How is it possible to tell the action sequence to stop all others when it is started?
Thank you for your help.
Sorry, I'm a bit confused now. Just to clear this out:
WDDOBEFOREACTION is for validating user inputs BEFORE Actions and HERE you can prevent actions from happening
WDDOAFTERACTION is called JUST WHEN an action is happening for all visible Views (it's to prevent redundant code which would be equal for all event handlers)
WDDOBEFORENAVIGATION is AFTER Actions and BEFORE navigation.
Check the chart in the following Link (sorry it's german, english version seems not available, but the chart is in english nevertheless)
http://help.sap.com/saphelp_nw73/helpdata/de/49/b8c706c7c26d7ce10000000a421937/content.htm
In my opinion put an if clause into WDDOBEFOREACTION, check whether the respective field is filled; and in case it is filled, execute your method; if not, don't.
That's why I am confused, you kind of answer your question within your question itself )) or I still don't understand what you want to accomplish.
best regards, hope this helps you (if not, try to explain it even more detailed for me ;-D)
Lukas
Similar Messages
-
How can i stop the Action Wizard from putting the original file into the Source folder with my changed documents?
[discussion moved to Creating, Editing & Exporting PDFs forum]
-
How can I share my iTunes library with another user on my laptop?
How can I share my itunes library with another user on my laptop?
If you type "Shore itunes library" into the search bar at the top of this page by "Support" you will find:
iTunes: How to share music between different accounts on a single computer -
How can i share my itunes library with another computer
how can i share my itunes library with another computer
Fingers crossed, the following document may be of some help with that:
iTunes: Setting up Home Sharing on your computer -
How can i share the pages application with another computer?
How can U share the pages application with another computer?
Just make sure it is for you or your family.
If you purchased Pages through the Mac App Store, then just login on the other computer using the same Apple I.D. and you can install it at no extra charge.
Peter -
HT3951 How can I share books and audio with another computer?
How can I share books or audiobooks with another computer?
You can't re-download audiobooks on any computer - they are currently a one-time only download. Music can be re-downloaded in some countries, they are listed on this page. But you should be able to copy your purchases from, for example, your backup and add them to the computer's iTunes via File > Add Folder To Library.
-
How can i stop refresh action of the IE Browser in my applet
I am running my applet in IE browser, My applet loads with an initial screen, applets starts changing its state as user is working on it, but if the user uses the Refresh option of the browser or goes to url and press ENTER key, my applet comes back to the initial screen.
How do i stop my applet from going back to the initial screen. Help is very urgently needed.
thanks
Sridhar NallapuThank you for the response,I have some complex screens that i show on the applet, JDesktopPane that is displayed in the Applet contains number for internal frames which are dependent on the data that is displayed in other internal frame. SO saving the state of the applet becomes very diffucult for me.
I want something like repaint functionality to happen when the browser refresh button is clicked. But on refresh button of the Browser will invariably load the Applet.
I am looking for a solution where we could stop reloading of the applet.
or call specific method while reload is happening.
I am looking for a solution, where applet refresh can stopped thru a java script. -
How can I sync my iPhone calendar with another iPhone using iCloud?
Must each iOS device being sync'd with another use the same apple id to sync using iCloud?
Yes. Both devices would have to use the same Apple ID under Settings > iCloud, and have Calendars turned on.
However, you can use another service (I use Gmail) to sync a shared calendar without having to use the same Apple ID.
My partner and I share a joint Gmail account, and have it added to our iPhones, and have the Calendar option enabled. Whenever I want to add an event to the calendar, I just temporarily change from my default (iCloud Home) to the Gmail. -
How can i unlock sim to use with another company
i want to use my iphoe with another company such as t-mobile nd i want to unlock my iphone 3gs.
No. If you hack the phone to unauthorized unlock, it will re-lock whenever updated or restored and randomly when syncing. Unauthorized modifications of the phone can't be discussed in this forum.
Note that using your phone with T-Mobile will cripple many features - NO 3G, FaceTime, MMS, or Visual Voicemail. -
How can i change button's value with another button?
You can see in file attach my problem.
I'm trying change value of button with another button and two button can be off to. But buttons aren't it.
Can you help me?
Thanks.
Attachments:
Twobuttons.vi 27 KBHola Carlos
No tengo muy claro lo que quieres, pero te envio un ejemplo usando eventos, en que los 2 controles pueden estar a off a la vez pero no a on.
Mira a ver si es lo que quieres. Usando eventos puedes hacer cualquiera logica.
Espero que te sirva
Saludos
Alipio
"Qod natura non dat, Salmantica non praestat"
Attachments:
Twobuttons.vi 31 KB -
How can I stop a task sequence if a custom HTA preflight check fails?
In our currently deployment method, we launch an HTA program before initiating the OSD process. This is only when run from the RAP menu, not via PXE. When a user initiates OSD through that menu, they get a message prompting them to close Outlook, and
a countdown of 5 mins, then OSD starts. They also have the ability to click on an 'OK' button to proceed on their own.
I've created a new script which checks WMI if Outlook and/or OCS are open, and if the machine is running on battery, spit out a "Failed" response and stop the HTA. I've also added a "recheck" button to re-do the check, and an 'OK
button if people jsut want to continue.
I'm curious if there is a way to prevent the task sequence from continuing if any of those conditions arent met. Currently it just pops up and says "Failed, Cannot conitue", but if they close the window, the task sequence thinks the program
has run, and the OSD migration starts. I'd like to be able and get the script to cancel the OSD process if a check fails.
Has anyone had success with this, using WINXP? I'd use the MS pre-flight check but it's only for WIN7.Interesting. Thanks for the response. Is there anybody out there that can assist with VBS part of the solution?
Here's the code I'm working with. Currently the battery piece isnt working as it should but I can figure that our, eventually. I'd like to get Jason's proposed solution in the code. If this isn't the right place, I'll take this somewhere
else.
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<title>OSD Preflight checks</title>
<HTA:APPLICATION
APPLICATIONNAME="OSD Preflight checks"
ID="objOSDPreReqChecks"
SCROLL="no"
CONTEXTMENU="no"
SINGLEINSTANCE="no"
MAXIMIZEBUTTON="no"
MINIMIZEBUTTON="no"
WINDOWSTATE="normal"/>
<!-- #region STYLEs-->
<style type="text/css">
H1{color:Black;text-align:center;font-family: Arial, Helvetica, sans-serif;font-size: 26px;}
p{font-family:"Arial";font-size:10px;}
fail{color:Red;text-align:center;}
.Version {float:left; font-size:1.0em;font-style:italic;color:#888888;font-weight:bold;}
.Header1 {width: 180px; text-align: right;font-weight:bold;}<!-- '1st column heading -->
H2 {font-family: Arial, Helvetica, sans-serif; text-align: center;}
H3 {font-style: italic;}
.style2 {width: 180px; text-align: left;}
.Header2 {width: 150px; text-align: right;font-weight:bold;}<!-- '2nd column heading -->
.style4 {width: 410px; text-align: left;}
.StatusBar
font-family: Arial, Helvetica, sans-serif;
text-align: center;
.hidden {display: none; visibility: hidden;}
</style><!-- #endregion -->
</head>
<script language="VBScript" type="text/vbscript">
'======================================================================================
' Script
' Version
' Purpose To check a machine is suitable for taking an OS deployment
'======================================================================================
'Features
' Modular design
' Verbose "Debug Mode"
' In-built data validation
' Custom error handling
' Custom error codes - 90x0
' Generic WMI handler
'BUGfix: Change CLng to CDbl to avoid overflow (in GetRAM)
'fixed - moved head section to top to become head > script > body
'fixed - fCheckModel display with leading ,
'fixed - fgetmodels dictionary list
Option Explicit
' #region GLOBAL DECLARATIONS: Persistent fold region
'======================================================================================
'GLOBAL Vars
'Things to just display (in GUI)
Dim strRAM
Dim strCPUInfo
Dim strCPUName
Dim strCPUDesc
Dim iCPUCount
Dim iCPUCoreCount
Dim iRAM
Dim strBIOSver, strBIOSDate, strBIOSInfo
'Time related
Dim TimerInterval 'timer to refresh HTA at start
Dim iTimer 'abort timer
Const iAbortTimeout=300000 'delay before window closes (in milliseconds)
Dim pbTimerID
Dim pbHTML
Dim pbWaitTime
Dim pbHeight
Dim pbWidth
Dim pbBorder
Dim pbUnloadedColor
Dim pbLoadedColor
Dim pbStartTime
'Dictionary
Dim objModelsDict,colKeys,strKey 'models
Dim objApprovedMakesDict
'Misc GLOBAL vars
Dim blnDebug 'set TRUE to trigger debug mode
Dim bAbortBuild 'Boolean flag to abort or not abort
Dim strTemp 'throwaway/scratch
Dim strNamespace 'wmi default namespace for ANY machine
Dim strComputer 'wmi reference to current machine, just .
Dim strService 'WMI service
Dim strQuery 'custom WQL
Dim ErrMsg 'custom error messages
Dim iErrMode 'State machine for error mode
Dim lFlags 'WMI flag
Dim strDisks
'Pre-requisites - things that will cause build to abort if values do not meet spec
Dim strHTAVendor 'Make of hardware
Dim strHTAVendorState
Dim strHTAModel 'Model of hardware
Dim strHTAModelState 'Model state
Dim strHTARAM 'RAM
Dim strHTARAMState 'RAM state
Dim strHTACPUSpeed 'Processor speed
Dim strHTACPUCores 'Number of cores
Dim strHTACPUFullInfo 'CPU + cores
Dim strHTAHDD 'Disk info
Dim strHTAHDDState 'Disk state
Dim strHTACheckRAW 'NTFS check
Dim strHTAArchitecture 'Processor support
Dim strHTAProduct 'Product ID
Dim strHTAOutlook 'Outlook running
Dim strHTAOutlookState 'Outlook state
Dim strHTABattery 'Battery check
Dim strHTABatteryState 'Battery state
'for WQL filters
Dim strWQLPCInfo 'Pre-req - (1) for various inc. domain role (servers)
Dim strWQLRAM 'Pre-req - (2) RAM
Dim strWQLCPU 'Pre-req - CPU speed string (not int)
Dim strWQLBootOrder 'Pre-req - Boot order string
Dim strWQLSATAMode 'Pre-req - HDD mode
Dim strWQLGenericBIOS
Dim strWQLCPUCount 'Pre-req - how many CPUs
Dim strWQLCPUInfo
Dim strWQLFSType 'Pre-req - Check HDD not RAW (i.e. is NTFS)
Dim strWQLDisks 'Disks
Dim strWQLChassis 'Machine type
Dim strWQLID 'Unique code from OEM
Dim strWQLProc 'is Outlook running = False
Dim strWQLBattery 'is on Battery = False
'State
Const cProblem = " Problem!"
Const cRunAgain =" RunCheck: Run System Check Again"
Const cSuccess = " Success!"
Const cPassed=" Pass"
Const cFail=" Fail"
'Pre-requisite to check: SET VALUES HERE vvvvvvvvvvvvvvvv
Const cApprovedOEM="Hewlett-Packard"
Const LegacyOEM1="Dell Inc."
Const LegacyOEM2="IBM"
Const cMinimumMemoryMB = 1000 'RAM in MB
'Const cMinimumMemoryMB = 1000000 'force fail test data RAM in MB
Const cMinFS="NTFS"
' Const cMinFS="HPFS" 'force fail test data
Const iMinCores=1
'Const iMinCores=10099 'force fail cores test data
Const iMinCPUSpeed=2 '20 'in GHz
'Const iMinCPUSpeed=90000 'in GHz
Const iMinCPUArch=32
'Const iMinCPUArch=64
' #endregion
' To hide anything use ID.className = "hidden", to show set to "", e.g. NotFoundArea.className = "hidden"
Sub Window_Onload
Err.Clear
VersionSpan.InnerText = objOSDPreReqChecks.Version 'Get version
self.focus
self.moveTo 100,100 'Move window top left
StatusBar.InnerText="Validating machine..."
document.body.style.cursor = "wait" 'hourglass cursor
'Call PreflightChecks 'use for testing as a VBS only, otherwise HTA timer will call below
TimerInterval = window.setInterval("PreflightChecks",10)
End Sub
Function PreflightChecks
' #region HEADER NOTES: Persistent fold region
'Version history
'ver 5 OCTOBER 2011 - added error handler
'ver 3rd Nov - removed HPonly queries
'// Solution: Custom Script for use with MDT - Adapted from hardwareinfo.vbs Mikael Nystrom – http://deploymentbunny.com
'Typical BIOS content
'Processor Speed = 2133/1066 MHz
'Boot Order = Network Controller,ATAPI CD-ROM Drive,USB device,Hard Drive,Diskette Drive,PnP Device #2,PnP Device #3,PnP Device #4,PnP Device #5,PnP Device #6,PnP Device #7,PnPe #8,PnP Device #9,PnP Device #10,PnP Device #11
'SATA (disk) mode: *IDE,--,RAID,-- or IDE,*AHCI,RAID
'On Error Resume Next
' #endregion
' #region CONSTANTS: Persistent fold region
'======================================================================================
'Fields available in HP BIOS
Const sAsset = "Notebook Asset Tag"
Const sOwner = "Notebook Ownership Tag"
Const sMan = "Manufacturer"
Const sNoteModel = "Notebook Model"
Const sCPU = "Processor Type"
Const sCPUSpeed = "Processor Speed"
Const sRAM = "Memory Size"
Const sModel = "Product Name"
Const sBIOSName ="System BIOS"
Const sBIOSVer = "BIOS Version"
Const sBIOSDate = "BIOS Date"
'Other BIOS stuff you could use too
'Const sOwnerTag = "Enter Ownership Tag"
'Const sBIOS = "PCID"
'Const sBIOS = "Define Custom URL"
'Const sBIOS = "Set Alarm Time"
'Const sBIOS = "PCID Version"
Const TextMode="1" 'text case sensitive for dict obj
'WMI core constants
Const wbemFlagReturnImmediately = 16 'wmi - Causes the call to return immediately.
Const wbemFlagForwardOnly = 32 'wmi - Causes a forward-only enumerator to be returned.
'Forward-only enumerators are generally much faster and
'use less memory than conventional enumerators, but don't allow calls to SWbemObject.Clone_
'Advisory config values - as in "you want to the change these"
Dim strHTABootOrder
Dim strHTASATAMode
'Dim strHTACPU
' #endregion
'======================================================================================
' #region WQL: Persistent fold region
lFlags = wbemFlagReturnImmediately + wbemFlagForwardOnly
'Queries of things to check (HP)
strWQLBootOrder = "select Name, value from HP_BIOSSetting where Name='Boot order'"
strWQLSATAMode = "select Name, value from HP_BIOSSetting where (Name='SATA emulation' or name='SATA device mode')"
strWQLDisks ="SELECT * FROM Win32_DiskDrive where mediatype like 'Fixed%hard disk%'" 'win32_disk only avail after W7
strWQLFSType ="SELECT * from Win32_LogicalDisk where DriveType='3'" 'only bother with HDDs
'Generic WMI query strings
strWQLGenericBIOS="SELECT Manufacturer,SMBIOSBIOSVersion,ReleaseDate FROM Win32_BIOS WHERE PrimaryBIOS = True"
strWQLCPUCount= "SELECT NumberOfProcessors,NumberOfLogicalProcessors from Win32_ComputerSystem"
strWQLCPUInfo="SELECT Name,DataWidth,description,MaxClockSpeed,NumberofCores,NumberOfLogicalProcessors from Win32_Processor"
strWQLPCInfo="SELECT Domain,DomainRole,SystemType,Manufacturer,Model,TotalPhysicalMemory FROM Win32_ComputerSystem"
' strWQLPCInfo="SELECT Domain,DomainRole,SystemType,Manufacturer FROM Win32_ComputerSystem"
strWQLChassis="SELECT ChassisTypes from Win32_SystemEnclosure"
strWQLID="SELECT IdentifyingNumber,UUID from Win32_ComputerSystemProduct"
strWQLRAM="SELECT * FROM Win32_PhysicalMemory"
strWQLProc="SELECT * FROM Win32_Process"
strWQLBattery="SELECT * FROM BatteryStatus Where Voltage > 0"
' #endregion
' #region MAIN algorithm
'=====================================================================================================
' MAIN
'Algorithm
'1) Check make (vendor)
'2) Check model (in list)
'3) Check RAM >x
'4) Check HDD TYPE (HDD is not RAW)
'5) Check CPU architecture
'6) Check outlook
'7) Check battery
'=====================================================================================================
'Initialise
window.clearInterval(TimerInterval) 'Reset timer to 0
' blnDebug=True
blnDebug=False
bAbortBuild=False 'default to DON'T abort
' bAbortBuild=True
'Build list of approved vendors
Set objApprovedMakesDict = CreateObject("Scripting.Dictionary")
objApprovedMakesDict.comparemode=VBTextCompare
objApprovedMakesDict.add cApprovedOEM,"OK"
objApprovedMakesDict.add LegacyOEM1,"OK"
objApprovedMakesDict.add LegacyOEM2,"OK"
objApprovedMakesDict.add "Lenovo","Testdata"
If blnDebug Then Stop
'1) all machines check make
strHTAVendor=fCheckVendor(strWQLGenericBIOS) 'check vendor in BIOS - if vendor not approved ABORT without proceeding
If bAbortBuild=True Then
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "FATAL ERROR - goodbye cruel world"
iTimer = window.setTimeout("Abort", iAbortTimeout, "VBScript")
Else
StatusBar.InnerText="Vendor: " & strHTAVendor & vbTab & " " & strHTAVendorState
'2) Discover current Model
strHTAModel=fGetModelName(strWQLPCInfo) 'get model name from WMI
strHTAModel=fUniversalCheckData(strHTAModel,"'Discover Model - fGetModelName'") 'validate
Call fGetModels 'get list of all valid models (from text file)
strHTAModel=fCheckModel(strHTAModel)
'2a) Model number (optional)
strHTAProduct=fGetComputerSystemProdIDNumber(strWQLID) 'manufacturer's product ID
strHTAProduct=fUniversalCheckData(strHTAProduct,"'Discover ID - fGetComputerSystemProdIDNumber'")
' StatusBar.InnerText=StatusBar.InnerText & VbCrLf & vbTab & "Product Code: " & vbTab & strHTAProduct
'3) Check installed Memory
strHTARAM=fGetRAM(strWQLRAM) 'find RAM size
strHTARAM=fUniversalCheckData(strHTARAM,"'Detect RAM - fCheckRAM'")
strHTARAM=fCheckRAM(strHTARAM) 'check RAM meets req
If strHTARAMState=cFail Then Exit Function
'4) Disk format IS NTFS
strDisks=fGetDrives(strWQLFSType) 'Get formatting info for all drives
strHTACheckRAW=fUniversalCheckData(strDisks,"'Detect filesystem - fCheckNTFS'") 'Validate data
strHTACheckRAW=fCheckNTFS(strDisks) 'Check FS format is acceptable (not RAW)
If strHTACheckRAW=cFail Then Exit Function
'Generic CPU calls
strHTACPUFullInfo="CPUs:" & fGetCPUInfo(strWQLCPUInfo) & " with CPU cores:" & iCPUCoreCount
strBIOSInfo="BIOS version: " & strBIOSver & ", dated " & strBIOSDate
'5a) CPU Speed check (info from http://www.robvanderwoude.com/wmiexamples.php)
strCPUInfo=WMI(strWQLCPUInfo,strNamespace) 'Get CPU details
strTemp=split(strCPUInfo,"@"): strHTACPUSpeed=strTemp(1)
strHTACPUSpeed=fUniversalCheckData(strHTACPUSpeed,"'Check processor - fCheckCPUSpeed'") 'Validate data
strHTACPUSpeed=fCheckCPUSpeed(strHTACPUSpeed) 'Check CPU clock speed
'5b) cores check
strHTACPUCores=fUniversalCheckData(iCPUCoreCount,"Check core count - fCheckCores") 'Validate data
iCPUCoreCount=fCheckCores(iCPUCoreCount) 'pass or fail?
'5c) CPU address width
strHTAArchitecture=fUniversalCheckData(strHTAArchitecture,"Check core count - fCheckCores") 'Validate data
strHTAArchitecture=fCheckCPUArch(strHTAArchitecture)
'6) Check outlook
strHTAOutlook=fCheckProcess(strWQLProc)
'7) Check Battery
strHTABattery=fCheckBattery(strWQLBattery)
'end checkss
document.body.style.cursor = "default"
'Display hardware values in GUI (in table)
Vendor.innerhtml = strHTAVendor 'Use str...var..STATE if you want Pass/fail text instead
Model.innerhtml = strHTAModel
Product.innerhtml = strHTAProduct
RAM.innerhtml = strHTARAM
CPUspeed.innerhtml = strHTACPUSpeed
CPUInfo.innerhtml = strHTACPUFullInfo
HDDFS.innerhtml = strHTACheckRAW
CapableArchitecture.innerhtml=strHTAArchitecture
BIOSversion.innerhtml = strBIOSver
BIOSDate.innerhtml = strBIOSDate' CPUName.innerhtml = strCPUDesc 'GetCPUName
End If
'======================================================================================
' #endregion
End Function
'generic WMI queries, by field and namespace
Function WMI(strQuery,strNameSpace)
'Aim: generic WMI calls
'return value of BIOS
On Error Resume Next
Dim colItems,objItem
Dim objWMI
Const strService = "winmgmts:{impersonationlevel=impersonate}//" 'binding to WMI
Const strComputer = "." 'this machine
Set objWMI = GetObject(strService & strComputer & strNamespace) 'GLOBAL wmi
Set colItems = objWMI.ExecQuery(strQuery,,lFlags)
For Each objItem In colItems
If Err Then
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "WMI query: " & strQuery & " in " & strNamespace & objItem.Name
Call ErrHandler("WMI error " & strQuery,1)
Else
WMI=objItem.Name 'Return value
End If
Next
End Function
Function fGetModelName(strWQLPCInfo)
'Aim: Get model name from BIOS - WMI field sometimes varies if laptop, so try two
'Return STRING: Model string from BIOS or "UNKNOWN" if null
On Error Resume Next
Dim colPCInfo,objPCItem
Dim strModel
Set colPCInfo = GetObject("winmgmts:").ExecQuery(strWQLPCInfo,"WQL",lFlags)
If Err Then
Call ErrHandler("fGetModelName: Error querying WMI " & strWQLPCInfo,2)
Else
For Each objPCItem In colPCInfo
If Not IsNull(objPCItem.Model) Then
strModel=objPCItem.Model
' iRAM=objPCItem.TotalPhysicalMemory
Else
If (strHTAVendor=cApprovedOEM And IsLaptop = True) Then ' resort to HP specific query for older laptops
'Notebook
strModel=QueryHPBIOS(sNoteModel)
if strModel="" then strModel=QueryHPBIOS(sModel) 'try alt value
Else
strModel=QueryHPBIOS(sModel)
End If
End If
Next
End If
If strModel = "" Then
fGetModelName = "UNKNOWN"
Model.style.visibility="hidden"
Else
fGetModelName=strModel
End If
End Function
'====================================================
'====================================================
Function fGetRAM(strQuery)
'Aim: get RAM installed. NB Win32_ComputerSystem::TotalPhysicalMemory may not be accurate
'Return integer
On Error Resume Next 'equiv to Err.Clear
Dim colItems, item
Dim iTotalMemory
Set colItems = GetObject("winmgmts:").ExecQuery(strQuery,"WQL",lFlags)
If Err Then
Call ErrHandler("fGetRAM: Error querying " & strQuery,2)
Else
iTotalMemory = 0
For Each item In colItems
iTotalMemory = iTotalMemory + CDBL(item.Capacity)/(1024^2)
Next
End If
If iTotalMemory = "" Then
fGetRAM = "RAM UNKNOWN"
RAM.style.visibility="hidden"
Else
fGetRAM=iTotalMemory
End If
End Function
'====================================================
'====================================================
Function fGetCPUInfo(strQuery)
'Aim: query WMI for CPU info - number and number of cores
'Return: function=CPU count, var for the cores: iCPUCoreCount, strHTAArchitecture, strCPUDesc
On Error Resume Next
Dim colItems, objItem
Dim NumberOfProcessors
Set colItems = GetObject("winmgmts:").ExecQuery(strQuery,"WQL",lFlags)
If Err Then
Call ErrHandler("GetCPUInfo: Error querying " & strQuery,2)
Else
For Each objItem In colItems
If Err Then
Else
If Not IsNull(objItem.NumberOfCores) Then
NumberOfProcessors = Trim(objItem.NumberOfCores) 'NumberOfProcessors
End If
If Not IsNull(objItem.NumberOfLogicalProcessors) Then
iCPUCoreCount = Int(Trim(objItem.NumberOfLogicalProcessors))
End If
If Not IsNull(objItem.DataWidth) Then
strHTAArchitecture=Trim(objItem.DataWidth) & "-bit"
End If
If Not IsNull(objItem.description) Then
strCPUDesc = Trim(objItem.description) 'cpu name
End If
End If
Next
If NumberOfProcessors = "" Then
NumberOfProcessors = "UNKNOWN"
End If
fGetCPUInfo = Int(NumberOfProcessors)
' iCPUCoreCount = Int(NumberOfLogicalProcessors)
End If
End Function
'====================================================
'====================================================
Function fGetComputerSystemProdIDNumber(strWQLID)
'Aim: Get UUID from Win32_ComputerSystemProduct
'Return: great big integer
Dim colSys,objSys
Dim strUUID
On Error resume next
Set colSys = GetObject("winmgmts:").ExecQuery(strWQLID,"WQL",lFlags)
If Err then
Call ErrHandler("fGetComputerSystemProdIDNumber: Error querying " & strWQLID,2)
Else
For Each objSys In colSys
If Not IsNull(objSys.IdentifyingNumber) Then
strUUID = Trim(objSys.IdentifyingNumber)
End If
Next
If strUUID = "" Then
fGetComputerSystemProdIDNumber = "UNKNOWN"
Else
fGetComputerSystemProdIDNumber = strUUID
End If
End If
End Function
'=================================================================================
'=================================================================================
Function fGetDrives(strQuery)
Dim colDisks,objHDD
Dim strDriveType, strDiskSize, strDisk
Dim strDiskFSType
Dim iGBUnits
On Error Resume Next
iGBUnits=1073741824
Dim iRAW
iRAW=0
Set colDisks = GetObject("winmgmts:").ExecQuery(strQuery)
For Each objHDD In colDisks
Select Case objHDD.DriveType
Case 1 strDriveType = "Drive could not be determined."
Case 2 strDriveType = "Removable Drive"
Case 3 strDriveType = "Local hard disk."
Case 4 strDriveType = "Network disk."
Case 5 strDriveType = "Compact disk (CD)"
Case 6 strDriveType = "RAM disk."
Case Else strDriveType = "Drive type Problem."
End Select
strDiskFSType = objHDD.FileSystem
'Find C
If objHDD.Name="C:" Then
If isNull(objHDD.FreeSpace) Then
If blnDebug=True then Call ErrHandler("ALERT!! Volume " & objHDD.Name & "is RAW",1) 'Abort/clean
fCheckDrives="ALERT!! Volume " & objHDD.Name & "is RAW"
End If
End If
strDiskSize = Int(objHDD.Size /iGBUnits) & "GB" 'calc size of disk
strDisk = strDisk & VbCrLf & "Vol " & objHDD.Name & " (" & strDriveType & ") size: " & strDiskSize & " (free: " & Int(objHDD.FreeSpace /iGBUnits) & "GB), " & strDiskFSType
fGetDrives=strDisk
Next
If (Err.Number <>0) Then
Call ErrHandler("WMI Property Query Error: [" & Err.Number & "]",2)
fGetDrives = -1
Exit Function
End If
End Function
'=================================================================================
'=================================================================================
Function fUniversalCheckData(varData,strStage) 'template
'Aim: Check value passed...
'is not blank
'is in range x..y
'spelt OK
'is in a list
'format is text, numeric
'return: string: the original value
On Error Resume Next
Dim Err
if blnDebug Then StatusBar.InnerText = StatusBar.InnerText & VbCrLf & "Validating " & strStage & " data..."
If Err Then
Call ErrHandler("WARNING: Error discovering value in " & strStage,2) '1=Quit,2=Warn
strHTAModel="Unknown"
Else
Select Case varData
Case IsEmpty(varData) Or IsNull(varData)
Call ErrHandler("WARNING: Error in "& strStage,2) '1=Quit,2=Warn
fUniversalCheckData="Unknown"
Case IsNumeric(varData)
If varData<0 Then
Call ErrHandler("WARNING: Value negative"& strStage,2) '1=Quit,2=Warn
fUniversalCheckData="Unknown"
End if
' & varData &
Case IsDate(varData)
Case Else
fUniversalCheckData=varData 'Data OK - return value unchanged
End Select
End If
End Function
'=================================================================================
'Checks - follow if true DO, if false warn/abort
'=================================================================================
Function fCheckBattery(strQuery)
'Aim: Find if battery is running
'Return pass/fail
On Error Resume Next 'equiv to Err.Clear
Const wbemFlagReturnImmediately = &h10
Const wbemFlagForwardOnly = &h20
Dim colItems, item
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\WMI")
Set colItems = objWMIService.ExecQuery("SELECT * FROM BatteryStatus Where Voltage > 0", "WQL", _
wbemFlagReturnImmediately + wbemFlagForwardOnly)
For Each item In colItems
if objItem.PowerOnline = True Then
strHTABattery=objItem.PowerOnline
strHTABatteryState = cFail
Err.Raise 9010,"fCheckBattery",strHTABattery & " Laptop running on battery. OSD Cannot continue."
Call ErrHandler(ucase(strHTABatteryState) & ": " & Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1)
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "FATAL ERROR - Laptop on Battery. Please plug into an outlet before proceeding."
iTimer = window.setTimeout("Abort", iAbortTimeout, "VBScript")
Else
strHTABatteryState = cPassed
End if
Next
fCheckBattery=strHTABattery
End Function
'====================================================
Function fCheckProcess(strQuery)
'Aim: Find if outlook is running
'Return pass/fail
On Error Resume Next 'equiv to Err.Clear
Dim colItems, item
Set colItems = GetObject("winmgmts:").ExecQuery(strQuery,"WQL",lFlags)
For Each item In colItems
if item.Name = "OUTLOOK.EXE" Then
strHTAOutlook=item.Name
strHTAOutlookState = cFail
Err.Raise 9010,"fCheckOutlook",strHTAOutlook & " running. OSD Cannot continue."
Call ErrHandler(ucase(strHTAOutlookState) & ": " & Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1)
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "FATAL ERROR - Outlook Running, please close outlook before proceeding."
iTimer = window.setTimeout("Abort", iAbortTimeout, "VBScript")
Elseif item.Name = "communicator.exe" Then
strHTAOutlook=item.Name
strHTAOutlookState = cFail
Err.Raise 9010,"fCheckOutlook",strHTAOutlook & " running. OSD Cannot continue."
Call ErrHandler(ucase(strHTAOutlookState) & ": " & Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1)
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "FATAL ERROR - Communicator Running, please close OCS before proceeding."
iTimer = window.setTimeout("Abort", iAbortTimeout, "VBScript")
Else
strHTAOutlookState = cPassed
End if
Next
fCheckProcess=strHTAOutlook
End Function
'====================================================
'1 - Make
Function fCheckVendor(strVendor)
'Aim: Check make is one the OS/build is designed For
'Return: STRINGS for "Make", BIOS version and BIOS date (generic): strHTAVendorState pass or fail
On Error Resume Next
Dim colItems,objItem
Set colItems = GetObject("winmgmts:").ExecQuery(strVendor, "WQL", lFlags)
For Each objItem In colItems
strHTAVendor=objItem.Manufacturer
if objApprovedMakesDict.exists(strHTAVendor) then
strBIOSver=objItem.SMBIOSBIOSVersion
strBIOSDate=Mid( objItem.ReleaseDate, 5, 2 ) & "/" & Mid( objItem.ReleaseDate, 7, 2 ) & "/" & Left( objItem.ReleaseDate, 4 )
strHTAVendorState=cPassed
Else
strHTAVendorState=cFail
Err.Raise 9010,"fCheckVendor",strHTAVendor & " found. The build will not work on this make of hardware"
Call ErrHandler(ucase(strHTAVendorState) & ": " & Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1)
bAbortBuild=True
end if
Next
fCheckVendor=strHTAVendor
End Function
'=================================================================================
'=================================================================================
'2 - Models check
Function fCheckModel(strThisModel)
'Aim Check target machine is in list of models
'Return string
On Error Resume Next
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "Checking model..." & VbCrLf
If objModelsDict.exists(trim(strThisModel)) then ' if current model in objDict then huzzah
strHTAModelState=cPassed
StatusBar.InnerText=StatusBar.InnerText & vbTab & "Model detected: " & vbTab & strHTAModelState
Else
strHTAModelState=cFail
Err.Raise 9010,"fCheckModel",strThisModel & " found. The build will not work on this model of hardware"
Call ErrHandler(ucase(strHTAModelState) & ": " & Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1)
end if
fCheckModel=strHTAModel
End Function
'=================================================================================
'=================================================================================
'3 - RAM
Function fCheckRAM(strRAM)
'Aim: Check installed RAM > x
'Return string digits with units, e.g. 4GB
'use strHTARAM for value
'==================================================================
' Memory Preflight Check (from MDT2012)
'==================================================================
On Error Resume Next
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "Checking RAM..."
If Err.Number <> 0 Then
Call ErrHandler("Error occurred while calculating computer's memory.",2)
End If
fCheckRAM = Int(strRAM/1024) & "GB" 'format in GB
If Int(strRAM) > cMinimumMemoryMB Then
strHTARAMState=cPassed 'Sufficient memory - show whole number in GB"
StatusBar.InnerText=StatusBar.InnerText & vbTab & "RAM installed: " & vbTab & strHTARAMState
Else
strHTARAMState=cFail
Err.Raise 9030 ,"fCheckRAM","Not enough memory in this machine!" & " Required physical memory is: " & cMinimumMemoryMB & " MB."
Call ErrHandler(ucase(strHTARAMState) & ": " & Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1) 'abort build
End If
End Function
'=================================================================================
'=================================================================================
'4 - NTFS disk
Function fCheckNTFS(strDiskFS)
'Aim: Check HDD is NTFS
'Return string
On Error Resume Next
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "Checking file system is not RAW..."
If Instr(1,strDiskFS,cMinFS,VBTextCompare)<>0 Then
fCheckNTFS=cMinFS 'disk format is OK (NTFS)
StatusBar.InnerText=StatusBar.InnerText & vbTab & " File system: " & cPassed
Else
fCheckNTFS=cFail
Err.Raise 9040 ,"fCheckNTFS","WARNING: Disk not correct file-system. Type required is: " & cMinFS & "." & VbCrLf & _
"The deployment will fail unless you reformat the target disk immediately."
Call ErrHandler(Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",2) 'halt build
End If
End Function
'====================================================
'=================================================================================
'5 - CPU checks
'=================================================================================
Function fCheckCPUSpeed(strCPU) 'any HW
'Aim: Check CPU speed
'Return string = number + appropriate units, e.g. 5HGz (strCPU)
On Error Resume Next
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "Checking CPU spec..."
Select Case Right(strCPU,3) 'check units
Case "MHz"
strCPU=Left(strCPU,4)/1000 'reformat to GHz
Case "GHz"
strCPU=strCPU 'unit already OK
Case Else
Call ErrHandler("CPU units are unknown",2)
End Select
'Check clock speed
If Int(Left(trim(strCPU),1))>=iMinCPUSpeed Then
fCheckCPUSpeed=strHTACPUSpeed 'CPU is fine i.e don't change value
StatusBar.InnerText=StatusBar.InnerText & vbTab & "CPU Speed: " & cPassed
Else
fCheckCPUSpeed=cFail 'already in GHz
Err.Raise 9050,"fCheckCPUSpeed","CPU speed pre-requisite failed. Minimum processor clock speed is: " & iMinCPUSpeed
Call ErrHandler(Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1) 'halt build
End If
End Function
'=================================================================================
'=================================================================================
Function fCheckCPUArch(strCPUArch) 'any HW
'Aim: Check CPU width
'Return string
On Error Resume Next
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "Checking CPU bus width..."
'Check clock speed
If Int(Left(trim(strCPUArch),2))>=iMinCPUArch Then
fCheckCPUArch=strHTAArchitecture 'CPU is fine i.e don't change value
StatusBar.InnerText=StatusBar.InnerText & vbTab & "CPU width: " & cPassed
Else
fCheckCPUArch=cFail 'already in GHz
Err.Raise 9052,"fCheckCPUArch","CPU width pre-requisite failed. Minimum processor width required is: " & iMinCPUArch
Call ErrHandler(Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",1) 'abort build
End If
End Function
'=================================================================================
Function fCheckCores(iCores)
'Aim: Check hardware (CPU) has a minimum number of cores
'Return Integer
On Error Resume Next
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & "Checking CPU cores..."
If iCores>=iMinCores Then
fCheckCores=iCores
StatusBar.InnerText=StatusBar.InnerText & vbTab & "Core count: " & vbTab & cPassed
'StatusBar.InnerText=StatusBar.InnerText & vbTab & "CPU cores: " & cPassed
Else
fCheckCores=cFail
Err.Raise 9051,"fCheckCores","WARNING: Not enough cores on the CPU to support the build. Minimum CPU cores is: " & iMinCores
Call ErrHandler(Err.Description & " (Code: " & Err.Number & " - " & Err.Source & ")",2) 'halt build
End If
End Function
'=================================================================================
'=================================================================================
Function fCheckHPCPUSpeed 'HP ONLY
'Aim: Check CPU speed
'return: string
'Check CPU speed
On Error Resume Next
strWQLCPU = "processor speed"
strTemp=QueryHPBIOS(strWQLCPU,"")
Select Case Right(strTemp,3)
Case "MHz"
strTemp=Left(strTemp,4)/1000 'reformat to GHz
Case "GHz"
strTemp 'is OK
Case Else
Call ErrHandler("CPU is unknown",2)
End Select
'Check clock speed
If strTemp>=iMinCPUSpeed Then
fCheckCPUSpeed= strTemp & "GHz"
Else
Err.Raise 9050,,"CPU speed pre-requisite failed"
Call ErrHandler("CPU is too slow",1)
fCheckCPUSpeed=cFail 'already in GHz
End If
End Function
'=================================================================================
'=================================================================================
Function fGetModels
'Aim: Read external text file
'return: dictionary object - models as key, integer as value e.g. Dell Optiplex,12
'On Error Resume Next
Dim objFSO
Dim objFile
Dim strFile
Dim strEntry
Dim n
Dim strfilepath
Dim iLineCount 'count lines to avoid listing first item with ,.
Set objModelsDict = CreateObject("Scripting.Dictionary")
set objFSO=CreateObject("Scripting.FileSystemObject")
Const ForReading=1
strfilepath = Left(window.location.pathname,InStrRev(window.location.pathname,"\"))
strFile=strfilepath & "Models.txt"
set objFile=objFSO.OpenTextFile(strFile,ForReading)
iLineCount=0
'read in each line of data until you reach the end of the file
do While objFile.AtEndOfStream<>True
strEntry=objFile.ReadLine
'you can now do what ever you want with the line as referenced with the strEntry variable such as
'echoing it back (e.g. wscript.Echo strEntry) or passing it as a variable to a function of subroutine (e.g. MyFunction strEntry)
objModelsDict.comparemode=VBTextCompare
objModelsDict.Add strEntry,iLineCount
iLineCount=iLineCount+1
If blnDebug then
If iLineCount=1 Then
StatusBar.InnerText=trim(strEntry)
Else
StatusBar.InnerText=StatusBar.InnerText & ", " & trim(strEntry) 'list models
End If
End If
Loop
objFile.Close
End Function
'=================================================================================
'=================================================================================
'====================================================
Function ErrHandler(strErrorMsg,iErrMode)
'Aim: to handle error states
' 1 = Abort
' 2 = Warn
'Return 'Appropriate text message explaining the error
'====================================================
Const msgTitle="SCCM Deployment Preflight Checklist"
'On Error Resume Next '< don't use that as we want to KEEP the error properties
'Abort=1
If iErrMode=1 Then
StatusBar.InnerText=strErrorMsg 'overwrite status with Error message
' StatusBar.InnerText=StatusBar.InnerText & VbCrLf & " " & strHTAOutlook & " " & strHTAVendor & " " & strHTAVendorState & _
' VbCrLf & " " & strHTAModel & strHTAModelState & _
' VbCrLf & " " & strHTARAM & strHTARAMState & _
' VbCrLf & " " & strHTAHDD & strHTAHDDState
iTimer = window.setTimeout("Abort", iAbortTimeout, "VBScript") 'Abort (close) after n seconds
'MsgBox strErrorMsg,vbExclamation,msgTitle
'ErrBar.class=""
ElseIf iErrMode=2 Then
'Warning
StatusBar.InnerText=StatusBar.InnerText & VbCrLf & strErrorMsg & " " '& "(" & Err.Description & " :" & Err.Number & ")"',vbExclamation,msgTitle
Err.Clear
End If
End Function
'====================================================
Sub Abort
'Aim: Quit gracefully
window.close()
End Sub
</script>
<!-- #region BODY -->
<body>
<br />
<div>
<span style="version"> <span id="VersionSpan"></span></div>
<div style="text-align: center;">
<H1 style="font-family: Arial, Helvetica, sans-serif; font-size: large; text-align: center; color: #000000; text-transform: capitalize">System information</H1>
<span>
<table border="1" cellspacing="0" cellpadding="0" style="width: 912px"
id="SysInfoTable">
<tr class="h1">
<td align="right" class="Header1" style="width: 76px; height: 18px">
</td>
<td align="right" class="Header1" style="height: 18px"><em id="VendorCaption">Vendor</em></td>
<td align="left" class="style2" style="height: 18px"><span id="Vendor"></span></td>
<td align="right" class="Header2" style="height: 18px"><em id="ModelCaption">Model</em></td>
<td align="center" class="style4" style="width: 400px; height: 18px"><span id="Model"></span></td>
</tr>
<tr>
<td align="right" class="Header1" style="width: 76px">
</td>
<td align="right" class="Header1"><em id="ProductCaption">Product ID</em></td>
<td align="left" class="style2"><span id="Product"></span></td>
<td align="right" class="Header2"><em id="RAMCaption">Memory(in MB)</em></td>
<td align="left" class="style4" style="width: 400px"><span id="RAM"></span></td>
</tr>`
<tr>
<td align="right" class="Header1" style="width: 76px">
</td>
<td align="right" class="Header1"><em id="CPUCaption">CPU speed (in GHz)</em></td>
<td align="left" class="style2"><span id="CPUspeed"></span></td>
<td align="right" class="Header2"><em id="CPUInfoCaption">No: CPU\Cores</em></td>
<td align="left" class="style4" style="width: 400px"><span id="CPUInfo"></span></td>
</tr>
<tr>
<td align="right" class="Header1" style="width: 76px">
</td>
<td align="right" class="Header1"><em id="DiskFSCaption">Filesystem info</em></td>
<td align="left" class="style2"><span id="HDDFS"></span></td>
<td align="right" class="Header2"><em id="CapableArchCaption">Architecture</em></td>
<td align="left" class="style4" style="width: 400px"><span id="CapableArchitecture"></span></td>
</tr>
<tr>
<td align="right" class="Header1" style="width: 76px">
</td>
<td align="right" class="Header1"><em id="BIOSVerCaption">BIOS version</em></td>
<td align="left" class="style2" ><span id="BIOSVERSION"></span></td>
<td align="right" class="Header2"><em id="BIOSDateCaption">BIOS Date</em></td>
<td align="left" class="style4" style="width: 400px"><span id="BIOSDate"></span></td>
</tr>
</table>
</span>
</div>
<div class="StatusBar">
<br />
<Span id="StatusBar">Loading...please wait.</Span>
</div> <br><br>
<div align="center">
<input type="button" name="btnStop" id="btnStop" value="Continue" onclick="Abort">
<input type="Button" value="Re-Scan Machine" name="button1" onClick="Window_Onload" class="button">
</div>
</body><!-- #endregion -->
</html> -
How can I STOP mail from syncing with .mac????
I don't have a .mac account, I will never have a .mac account, I have in mail prefs BOTH boxes under "synchronize with other computers using .mac" unchecked, and yet Mac Mail tries to tie up my entire system "synchronizing with .mac" all the time, especially when traffic is heavy (downloading or uploading). I've got activity viewer on and the stop sign is ghosted, there appears to be no way to stop Mail from doing this useless tie up time wasting process that manages to completely freeze up mail until it's completed and sometimes slow up other programs as well. I only have POP accounts, no IMAP accounts that have to be synced.
This didn't start happening until I upgraded to 10.4.11. Prior to that Mail blazed through everything, and it NEVER tried to sync with .mac.
Is there any way to turn this useless "feature" (for me) OFF?
Thanks!I was on Tiger earlier, but just got home to a Leopard machine... and a power outage during the day seems to have blown my Tiger's Monitor, but look for...
/Users/bd/Library/Application Support/SyncServices/Local/clientdata/com.apple.DotMacSync
I'd try dragging the whole folder, if it exists...
/Users/YourUserName/Library/Application Support/SyncServices
to the Desktop & reboot, we can always move it back if need be.
/Users/YourUserName/Library/Preferences/ByHost/com.apple.DotMacSync.<ethernet MAC address>.plist
/Users/YourUserName/Library/Preferences/com.apple.DotMacSync.plist
are both other good choices to drag to the desktop.
We might even have to go in and Copy this to the Desktop then Trash the originl...
/System/Library/CoreServices/dotmacsyncclient -
How can I stop my phone buzzing with alarms
using a 58000 Xpress Music
I synch with Outlook - great!
I have a todo item and the phone now reminds me too - great!
Unfortunately the alarm assumes I am there, all the time with my phone, and it's default time is 6 a.m so if the phone s in my bedroom like today, and have a todo item I get woken up.
Even if I turn off the alarm tone I get woken up as there appears to be no way to suppress the vibrating buzzer which will carry on trying to wake me u until I get up and press the screen or until the battery runs out (which it does quite quickly when the buzzer is continually making the phone vibrate).
Every other calendar app I have seen reminds you politely once only unless asked to snooze, and has the ability t be totally silent and non-invasive
Can I make my phone behave in a "normal" way?
Thanks in advance
JohnJohn,
Have you figured out how to turn off the buzzing? Really irritable! My only solution is to delete all the calender events and go on the market for a Windows Mobile phone. ..funny you would think in these times that Nokia would like to keep customers by giving them want they want...Not asking alot really...
Steve -
How can I stop Front Rew kicking with ATV remote?
I have all new kit and trying to work out how to avoid the Frontrow or iTunes on my iMac reacting to the remote while directing the ATV2 device.
Does anyone know how I can do this?
I have tried shielding the signal which worked with the previous version ATV (1) and remote but not this time.
(I do not really need to use the remote for the iMac but would in future like to be able to switch on or off for use with iMac.)
Thanks for any help!In the Security System Preferences you can disable the infrared remote on the iMac. Or, you can "pair" one remote with each device. Unfortunately, if you have only one remote you can only pair it with one device. The other device won't know it's been paired with something else.
-Doug -
HT1338 how can i stop recurrent beach balling with iPhoto 11 on mac OSX 10.7.5
Iphoto 11 keeps beach balling and often takes the whole computer with it. - Mac OSX 10.7.5. I have run the internal iphoto repair database/thumbnail/permissions utility without effect.
Can anyone tell me if a mac mini with 2 GB of RAM and a 2.4GHz Intel Core 2 Duo processor should be able to run Mac OSX 10.7.5 and iphoto 11? I am thinking I am just short of resources causing recurrent beachballing of iphoto and crashing of the whole computer. I have 133 GB of 320 GB free on the HD. Thanks for any advice.
Maybe you are looking for
-
Problem in loading Ntriple to Oracle
Hello, Can some one please point what could be wrong in loading of Data in Ntriple format using the Code provide by Oracle to convert RDF data in N-Triple format to Oracle's RDF storage type, SDO_RDF_TRIPLE_S in Oracle10g R2. called TestNTriple2NDM.j
-
Messages are set to "To be delivered "
Hi, we are having a problem in XI adapter engine. all the messages are being set to be delivered we are finding this status as "to be delivered" after we disconnected the target systems as we are moving our servers to a different location but if the
-
Hi Apple Community, I have an annoying Screen blemish on white tited pixels on my retina display Macbook pro. Should I get this checked out???? Do I deserve a new one??? Inch from bottom bessel. 1.75inch from left bessel.
-
TS3212 C Runtime Error installing itunes
I tried to run the itunes 64 setup(1) exe. for 11.1.4.62x64. I keep getting error message "an application has made an atttempt to load the C runtime library incorrectly. Error 7 (windows error 1114). help!
-
Unknown "from" email address when I compose new email
Hello, Starting last night, I noticed that when I go to compose a new email, an unknown email address defaults into the "From" section of the new email. If I pull down on the unknown address, my real address is there, but not selected. I can select i