How can I stop getting the error message of firefox not being permitted into a website?

Okay so yesterday while on my school site trying to do work and access my course, this error message popped up saying either my internet connection is not good, which it is working, or that the website is busy but it wasn't so it had to be with my firewall and firefox. So I went to firefox website to see if I can fix it, I did what they said to do and to remove firefox from the list of programs I'm allowing in and then to allow it back in. And it didn't work. So i updated firefox and it worked perfectly.
Until today, I tried to access my course and it popped up with the same message. So I tried to do what I did yesterday with removing it from the list and allowing it back in but it didn't work. And firefox is up to date so I honestly don't know what else to do. Can you help?

Sounds like you were 'fixing' the firewall for Firefox access. If Firefox is working everywhere except your school website, I doubt if your issue is with the firewall.
Please provide a screenshot of that error message.
https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem
It is best to use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed a maximum file size of 1 MB.
Then use the '''Browse ....''' button below the '''''Post a Reply''''' text box to upload the screenshot.

Similar Messages

How can I stop getting this error message?

Ive been having a problem with AA3 since I installed it and I cant seem to figure it out. It doesnt happen everytime, but usually when I open AA3, load or start a session, and press the play or record button, AA3 crashes giving me the following error message.
Does anyone have any tips on how I can stop this from happening? It makes doing projects in AA3 extremely nerve wracking, never knowing if it could crash in the next second. And especially when you cant get the project to load up without crashing, extremely embarrasing when there is a band with me.
Anyway thanks for the help.

>So is this a problem with other devices using the same sound card?
Yes. You can only use an ASIO driver (which is what Audition now uses) with one program at a time. I suspect that when Audition opens, it finds what it thinks is a legitimate device, but no legitimate means of accessing it. You can't blame Adobe either - this is purely an ASIO limitiation, and Adobe only introduced ASIO because people clamoured for it for years (most of them not realising the downside to it).
You
might find that you can get around this by using the (free)
ASIO4ALL driver, which converts Audition's ASIO output to WMD, which has rather less problems from this POV.

TS3274 I am getting the error message "you are not a part of the administrator group". How do I get rid of this

I am getting the error message "you are not a part of the administrator group" when I try and set up my ipad and log in with my apple id. How can I bypass this error message?

Firstly, I recommend to go to Central Administration > Security > Manage the farm administrators group > make sure that your account is listed.
Yes, the account that I log into the server is a Farm Admin account
Secondly, did you do the backup or restore operations with PowerShell command or through Central Administration?
Used to be able to do it thru the CA, now I'm running PowerShell and using the scheduled tasks to run it when needed.
If you are using PowerShell, I recommend to run SharePoint Management Shell as administrator.
I'm able to run the backup with the account that is in the Farm Admin group. as I have that setup as the PowerShell account to run under.
If you are using Central Administration, I recommend to run Internet Explorer as administrator.
I still get this error when I run IE as the log in to the server who is in the build in and the SPS Farm Admin Security group:
You are not a local administrator. You must be a member of the Administrators group on the server that is running Central Administration to perform most backup and restore operations.

TS3683 I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013. I keep getting the error message "iTunes could not back up iPad "" because an error have occurred." Any suggestions on what I can do to resolve this error?

I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013. I keep getting the error message "iTunes could not back up iPad "" because an error have occurred." Any suggestions on what I can do to resolve this error?

Hi there BuffaloSailor!
I have an article here with some troubleshooting suggestions for this issue:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Ever since upgrading to Lion I keep getting the error message "disk was not ejected properly."

Ever since upgrading to Lion on my iMac G5 Intel Core 2 Duo, I keep getting the error message "disk was not ejected properly." I have repaired permissions and reformatted my external LaCie 2TB USB hard disk, but the error continues. I use this disk for my Time Machine backups. This always seems to happen when the computer wakes from sleep, but not consistently. The computer was asleep overnight and backed up as soon as it awakend this morning. Two hours later I get the improper ejection message. I have used the same external disk with Snow Leopard (all versions), but never had this error message or problem. This disk has been in use without any problems since February, 2011. Upgrading to Lion is when this problem began. This is the below message (but from online image from Snow Leopard, but Lion message is essentially the same).

I had a similar issue. Mine was with a Seagate GoFlex drive. The solution was to install GoFlex for Mac 1.1.2 which included a 64-bit driver to disable the drives built in sleep timer:
http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=goflex-mac-install-softw are&vgnextoid=77002aaf8cc5d210VgnVCM1000001a48090aRCRD
I document how I discovered this in my blog post:
http://www.innerexception.com/2011/10/tale-of-computing-misery-how-to-fix.html

I want to de-install mac-excel test version and get the error message: you have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. I am sysadm

I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?

Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
Go to System Preferences a open up the Users pane;
On the left side of the pane, you shuold see Login Options;
Enabled editing option clicking on the lock (it will ask your password);
Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
Select Enable Root Account (you can set a password, or not);
Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
Theorically, from this account you will be able to unistall the application.
After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps

TS1717 ATH.exe has stopped working. How do I stop getting this error message and fix the problem?

I keep getting the error message ATH.exe has stopped working. How do I fix the problem so I don't the error message anymore?

There is a problem that Apple needs to fix (ha ha.. there are many but I digress) with ATH hanging after an ios device has been removed from the USB slot.
Re-inserting the device creates a new ATH instance which has some kind of conflict with the existing (hung) instance.
The solution is to end the process using CTRL-Alt-DEL and under processes there will mostlikely be two (or more). Kill them both, re-insert your device and it should sync OK.
Apple - please fix this (and the firewall problem) immediately.

TS1538 Since my iPhone 4 update I can no longer up date it through my computer I am running windows 7 and before the iPhone update I didn't have any problems now I get the error message iTunes could not connect to this iPhone. An unknown error occurred (0

Since my iPhone 4 updated I can no longer sync it or charge it with iTunes I get an error message ------>iTunes could not connect to this iPhone. An unknown error occurred (0xE000084)

From this support document http://support.apple.com/kb/TS3694 see this:
Unknown Error containing "0xE" when restoring
To resolve this issue, follow these steps. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. Learn about issues syncing iOS devices with P55 and related Intel Chipsets.

Library Lost - Please HeIp I tried updating my old ipod & now all 10,000 songs in my library have an ! next to them and I get the error message "song " " could not be used because the original file could not be found" on every song I try to play

Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years). I plugged it into my pc, it was recognized and the software updated. I created a new playlist and tied to sync the ipod. This ipod had never been used on this pc/itunes since the pc is only 2 years old. When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing. I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs). When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them. Only my recent purchases from itunes do not. When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found." How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!? I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again.
Any help is greatly appreciated.

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

When trying to change ringtone I keep getting the error message file type not supported.

I have downloaded some ringtones fro VZ Tones and when I go to make them the default it gives me the error message file type not supported. If I go to my storage and try to look at pictures, it tells me the same thing.

That's definitely odd CrystiDawn, and I understand it can be quite frustrating. Let's get to the bottomof this. What device make and model phone do you have? Did you receive a text message with a link to download the ringtones? If so, once downloaded, please go to all your Apps, locate "Files" and play the ringtone using the media player. You will have the option to set it as ringtone while playing and pressing the menu icon. Were the pictures taken from the phone or transferred using the USB cable?
AdaS_VZW
Follow us on Twitter at @VZWSupport

How can I fix getting the error 11111 when submitting a podcast to Apple?

I am starting a new podcast but when I submit the link to Apple through iTunes I get the error 11111.

Hi have been looking at dropbox do you think that this answer below would work??
Force a file or folder to download
Using the new direct link above, you can further modify the URL to force the browser to download the file, rather than handle it natively. To force a file download, append a direct link with ?dl=1. For example:
https://dl.dropbox.com/s/xttkmuvu7hh72vu/MyFile.pdf
(Note that the URL begins with dl.dropbox.com, as instructed in the section above.)
Becomes:
https://dl.dropbox.com/s/xttkmuvu7hh72vu/MyFile.pdf?dl=1
Enter the new URL in the address field of your browser and it should automatically download, instead of open, the file.
Public folder links
Accounts created before July 31st, 2012 are pre-populated with a Public folder. All the functionality of Public folders (and more) is available from anywhere in your Dropbox by creating a Dropbox link.
The primary difference between Dropbox links and Public links are that unmodified Public links will render in your browser by default rather than open in a preview window on the Dropbox website. If you would rather force the Public link to directly download rather than render in the browser, add ?dl=1 to the end of the URL, as described above.

I am trying to log in to my MSN Hotmail e-mail account, and after entering my login info, I get the error message that Firefox cannot find the server. Why not?

When trying to log into my MSN Hotmail account (@msn.com), after I enter my credentials, Firefox gives me an error message that "Firefox can't find the server at blu152.mail.live.com". I am able to log in easily from the same computer using Internet Explorer. I think this problem just started yesterday. Why is Firefox unable to connect to my e-mail account?

Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

When building an executable I get the error message var.lsb not found.

When building that executable with LV 5.0 it will work, but it will not work on a korean version of WinNT 4.0.

When exactly does the error message come up? When you're doing the build or when you attempt to run the executable?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

TS3694 how do i stop getting an error message 4002 -- itunes unable to complete my transaction? message is false -- i can do transactions.

Had a persistent itunes error message on my old Macbook -- 4002 unable to complete your transaction -- which came up every time I start itunes. But the message was false. I can buy music from the store. Bought a new macbook pro and transferred my files over to it. Now get the same error message on my new machine. How do I make this go away? Thanks.

Hi, Kenny.
Thank you for visiting Apple Support Communities.
There are a couple things that I would recommend trying. Try closing all open applications and power cycle the device. Next, go through the section labeled Troubleshoot issues on an iPhone, iPad, or iPod touch in the second article below. If the issue persists, try completely signing out of the iTunes Store on the iOS device and sign back in. Be sure to test downloading an application after each step.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H.

I have spent dozens of hours over the last years trying to find out why I get the error message "...not authorized to copy" when I try and drag a download from ADE to my nook. Why is this simple procedure not foolproof. There are hundreds of people sear

Typical - what on earth am I doing at this page and why was I sent here
Now I get a message saying there is an error and my content could not be saved
What is wrong with you people?
How can you make such a simple operation so complicated that it is festooned with error messages
LEARN THE MEANING OF FOOLPROOF YOU IMBICILES

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

How can I stop getting the error message of firefox not being permitted into a website?

Similar Messages

Maybe you are looking for