How can I stop 'Insufficient priveleges' from not saving play lists?

When playing I Tunes I constantly recieve a message 'Insufficient priveleges to save the play list', it flashes up time after time despite all attempts to close it down. I have deleted I tunes and re-loaded it, but the problem persists. I run the programme 'as administrator' and have tried to ensure that folder permissions are OK -BUT

Exclude the iTunes folder from any on-access anti-virus scanning.
tt2

Similar Messages

  • How can I stop my iPhone from starting to play music in my pocket?

    Almost everytime I get my phone out of my pocket it's playing music! How do I stop it doing this it's always locked before it goes into my pocket.

    It should only do that if you hold down the T key at startup.  Otherwise the PRAM battery is probably near death, or the T key needs to be cleaned so it doesn't think it is being held down.  To clean the keyboard properly, you will probably need to bring it in for service.

  • How can I stop my iPhone from synching my contacts and groups lists twice?

    How can I stop my iPhone from synching my contacts and groups lists twice....I am using iCloud but am not sure how correct this duplication.

    Go into Settings>Mail, Contacts, Calendars. Is this happening at the bottom in the signature section, or in the header of the mail where your email address is? If it is the signature, then go to the Signature area of the Mail settings. If this is in the header, then go to the account in question and edit your account information to include your name instead of Johnny.

  • When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

    When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

    In Logic:
    Preferences/Audio Set Recording Delay to 0 <zero>
    This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
    On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number.  It's actually a bug in Logic, as it should always display the waveform.

  • How can I stop a JFrame from closing when clicking the close button.

    I need to display a dialog when a user attempts to close my app, giving them the option to close, minimize or cancel. How can I stop the form from closing after the user makes his selection? I have the folllowing code, but my form still closes after selecting an option:
    private void formWindowClosing(java.awt.event.WindowEvent evt) {                                  
            //An array of Strings to be used a buttons in a JOptionDialog
            String[] options = {"Close", "Minimize", "Cancel"};
            //Determines what the user wants to do
            int result = JOptionPane.showOptionDialog(null, "What to you want to do?  Close the application, minimize or cancel?", "Please select an option...", 0, JOptionPane.QUESTION_MESSAGE, null, options, options[0]);
           //Determines what to do, depending on the user's choice
            if (result == 0) {
                //Close the application
                System.exit(0);
            } else if (result == 1) {
                //Minimize the application
                this.setState(Frame.ICONIFIED);
        }Any help would be much appreciated!

    import java.awt.event.*;
    import javax.swing.*;
    public class test extends JFrame {
         public static void main( String[] args ) {
              new test();
         public test() {
              setSize( 200, 200 );
              //the next line makes the JFrame not close
              setDefaultCloseOperation( JFrame.DO_NOTHING_ON_CLOSE );
              //now add a listener that does the trick
              addWindowListener( new WindowAdapter() {
                        public void windowClosing( WindowEvent e ) {
                             //ask the user and do whatever you wish
              setVisible( true );
    }

  • How can I stop iPhone 5s from blinking apple logo

    how can I stop iPhone 5s from blinking apple logo

    Hello tigersrock,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Have a nice day,
    Mario

  • How can i stop deleted gmails from reappearing?

    how can I stop deleted gmails from reappearing?

    Ignore him!  Syncing will not solve this.
    if this just started, it may also resolve on its own.   A reboot may resolve it quicker.
    When you delete, are you confirming the delete by taping "done" Or "delete"?

  • How can I stop the program from going through all of the text previously put in.  It is making the process very slow.

    How can I stop the program from going through all of the text previously put in.  It is making the process very slow. 

    while True:
    and just indent everything else under it
    Ends when you press ^C.
    if you wish to have a way to break out of the loop, say, when you press enter at the VPC number without entering anything, add the following after your vpc input:
    if not vpc:
    break
    which will break out of the while loop and end your program.
    Last edited by buttons (2007-12-14 22:03:06)

  • How can I stop my screen from going on and off when I play games ?

    HOw can I stop my screen from going on and off all the time when I touch it.

    Maybe it is a hardware problem, but you will not know that unless you start eliminating all possible software issues. Try this. Close all apps in the recents tray and reboot your iPad.
    Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • All my contact are being copied to my friend's iphone and i also am getting his contacts on my phone,when i delete a contact it also deletes it from his phone,we are sharing the same apple ID. How can i stop our contacts from being shared between us

    All my contact are being copied to my friend's iphone and i also am getting his contacts on my phone,when i delete a contact it also deletes it from his phone,we are sharing the same apple ID. How can i stop our contacts from being shared between us

    Everything that you have checked in your icloud settings will be shared between devices using the same Apple ID.  If you don't want icloud to share that information, then simply turn off that process under settings > icloud

  • How can i stop my phone from vibrating in my ear when i am on the call?

    How can i stop my phone from vibrating in my ear when i am on the call? I usually keeps my phone on vibration mode so i get notified when there is a new mail or message? However, when i am on the call, then also, it vibrates in my ear everytime a mail comes. Very irritating. I use my business phone and mails keep coming every 2-5 mins.
    Please help.

    very impractical . specially when you call A LOT and receive notifications constantly!

  • How can i stop internet media from flooding elements 6?

    how can I stop elements 6 from constantly importing internet photos and flooding my memory?

    PSE isn't importing photos off the internet, but it could be importing photos from your hard drive that are being placed there as you browse the internet.
    It's likely that you've told PSE to import all new photos on your hard drive using the Watched Folders mechanism.
    In the Organizer, go to File > Watch Folders...
    See the list of folders PSE is currently watching.
    Check the setting near the bottom of the dialog as to what PSE should do when it finds new images in the folders it is watching.
    Make any necessary changes to have it do what you want it to do.
    Cheers
    Bob

  • Hi, how can I stop my screen from freezing up.Its acts like a scratch card, I use the mouse cursor to rub away to find the password box?

    HI,how can I stop my screen from freezing, It acts like a scratch card,I run over it with the mouse to scratch away at the grey screen to find the password box
    underneath?

    OS X: Login window partially appears, cursor movement redraws screen

  • How can i stop an email from being sent?  i cannot find an outbox in outlook

    How can I stop an email from being sent.  I cannot find an outbox in Outlook

    Outlook is a Microsoft product, I'd suggest posting on the Office for Mac Product Forums.

  • Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

    Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

    If you are printing via a Windows shared printer and it is the Windows user account that you are being prompted for then you can save this in the Keychain, as shown below.

Maybe you are looking for

  • Error got while creating a jdbc in Weblogic server 9.2

    Hi All, I am getting the following error +"Warning! Connectivity to backend database not verified. This is either because required connection pool attributes "TestConnectionsOnReserve" or "TestConnectionsOnRelease" have not been enabled, or an invali

  • Satellite Pro M50 (PSM55E-001001EN) - Some keys are not work

    Hi all Ive got a problem with my keyboard on the above model. I originally thought it was just the keyboard so I bought another one and installed it and this one is doing the same. Problem:- r button and y button not working originally new keyboard n

  • Field Type  to choose???

    Hi Gurus, We have one field called "Main EAN" which we have created in MDM and syndicating back in SAP. This is the field in SAP by same name and has check box to ticked.I mean if you tick the check box then the EAN(European Article number) is Main E

  • What is a system base driver

    I upgraded to W7U x64 and the device manager under other device indicates that two The drivers for this device are not installed. (Code 28) To find a driver for this device, click Update Driver. It can't find them automatically. Any suggestions what

  • Networker 7.3.2 software compression is not working...

    Hi, After reading some docs, I have understood that using the ASM "+compressasm:." will do the trick for you to be able to use the software compression. As pre-configured Directives like "Unix using compression" is available where "+compressasm:." AS