How can I stop the fan from running continuously on my iMac? I have tried resetting the SMC and this did not work.
I have a 27 in. iMac OS X, Version 10.7.5, Intel Core i5 and have a problem with the very loud and annoying fan running continuously. The fan starts up immediately upon powering up and stays on all the time. I have researched this on the internet and have tried resetting the SMC unsuccessfully. Should I try fan control software?
To reset the SMC means to reset the power management settings for your Mac. To do this, follow these simple steps.
1) Shutdown your Mac by going to the Apple Logo in the upper left hand corner of the screen and selecting "Shut Down" from the drop down menu.
2) Turn your machine back on while continuing to hold down the power button.
3) After the initial boot chime, your power indicator light should flash three times.
4) Your screen will remain black and you will hear the boot chime again. At this point, you may release the power button and allow your Mac to boot up normally.
All the best with getting your Mac Mini to run smoothly.
Similar Messages
-
I have tried to log into my apple account so I can download my songs onto my iPhone. It keeps telling me my apple id is disabled. I've tried resetting my password but that did not work. How can I fix this?
After resetting your password you might then need to log out of your account on your device by phone on your id in Settings > Store (Settings > iTunes & App Stores if it's on iOS 6) and then log back in so as to 'refresh' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
How can I stop my battery from running out in my in my iphone 5 with the new i0s7
how can I stop my battery from running at a super fast rate on my in my iphone 5 with the new i0s7, ever since I upgraded I am needing to charge up at least 3 times a day.
https://discussions.apple.com/message/23361957#23361957
-
How can i activate my iphone 4 running ios 7.x if i have forgot my apple id and password
how can i activate my iphone 4 running ios 7.x if i have forgot my apple id and password
iOS: Forgotten passcode or device disabled after entering wrong ...
-
After updating to iOS7 on my iPhone 4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.
I finally just resolved this after not being able to enable location services since upagrading to iOS 7. Posting the solution here 'cause I couldn't find it anywhere else.
I enabled Restrictions under Settings > General > Restrictions and created a passcode (I'm not sure if this was part of the solution, but it wasn't enabled for me by default.)
In Restrictions, under Privacy, Location Services was set to "Allow Changes" (This still didn't solve the issue of the greyed-out Location Services switch though - I still couldn't turn it on.)
Also in Restrictions, I also switched "Find My Friends" to "Allow Changes"
Once I did step 3, the switch under Settings > Privacy > Location Services was no longer greyed out and could be switched on.
Hope this helps! -
My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?
Most of your purchases content can be downloaded again via the Purchased tabs in each of the store. I realize that this will be a problem for the iTunes Store on the iPad, but that has nothing to do with apps, since apps are in the App Store.
If you backed up synced with iTunes before you restored the iPad, your content should be in iTunes on your Mac and you should be able to sync it back again. -
I bought a belkin mini display unit cable( new) and connected the thunderbolt port in the MBA ( 11" , mid 2012) to the Imac mini display unit port using this cable. Pressed the CMD & F2 keys on the Imac keyboard as required but this did not work. Should I try with another cable ? Should i try with a thunderbolt cable ( recommended by appple support ) -- but they too were not sure about this. Is the Mid 2010 21.5" Imac not able to function as an display unit? Any guidance would help and will be much appreciated.
Welcome to Apple Support Communities
Only the 27-inch iMac and Mid 2011 and newer iMacs can be used as an external screen, so you can't use your Mac as an external screen. See > http://support.apple.com/kb/PH11302
You can still use your iMac as an external display, using an application like ScreenRecycler -
My Mac is 18 months old and the fan has decided to run as soon as the mac is idle, sleeping or shut down, as soon as i touch the mouse pad or keypad it stops, i have to turn it off at the mains to stop the fan running, i have also tried resetting the SMC but to no avail, please can someone help?
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)
Avast! Uninstall -
Hi There,
My itunes quits unexpectedly when I try to login. I cannot even open the application, not sure why this is happening. Have upgraded my itunes and this has not solved the problem either. If anyone can help me out, that would be appreciated. ThanksHello balisurfergal,
Thank you for using Apple Support Communities.
For more information, take a look at:
Mac OS X 10.6: If an application quits unexpectedly
http://support.apple.com/kb/PH7044
iTunes 10 for Mac: May quit unexpectedly on launch
http://support.apple.com/kb/TS3494
Have a nice day,
Mario -
I just updated my Iphone 4S to the new software. Ever since I did the update it has been searching for cell service and I am not able to make outgoing calls or get texts. I have tried to back up and restore but it keeps giving me the error message 3002. I tried to click on the error number but there is no info about it. Could someone help?? Thanks
After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed. -
my work computer has an old OS and does not support newer version of Firefox. Unaware of this i tried ti install the latest version only to find it did not work and i have lost use of firefox.
I would really like a link to version 3.6.24'''3.6.24 is supported'''
http://www.mozilla.org/en-US/firefox/all-older.html
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
I need to back up my files and date before erasing my drive, but my time machine backup is not coming up. How do I access my hard drive to back up my files?
A erase of the drive or boot partition is not always necessary.
Flashing question mark at boot could be a easy fix, sometimes it's the firmware that simply forgot what bootable volume to boot from.
Try holding the Option key down while booting the machine, a choice of bootable options appears, select your OS X and boot up.
When you get in, head to System Preferences > Startup disk and set it again new. This will tell the firmware what to boot from. Test it to see.
Now if you don't have a selection of bootable options, it could be that the drive is dead, or OS X is erased or corrupted so it can't boot.
You'll have to run through this list of fixes to see what's going on, if you need a hardware fix or what, I've also included links if you can't fix it and need to recover your data etc.
(If it's not remmebering your boot selection then also run through the list to reset things.)
Step by Step to fix your Mac -
I just bought an ipod nano. I cannot sync it . It will say on the screen that it is syncing and that it is finished but then there is not music on it from my computer. Can anyone helo me?
As you connect your ipod to iTunes, an option in the upper right of the screen will appear. When you click this, it will show the different menu for your ipod.
-
Also, it shutdown unexpectedly when I was using an application. I use it regularly.
Have you tried plugging the charger into a different electrical outlet?
Troubleshooting: My computer won't turn on -
All my contact are being copied to my friend's iphone and i also am getting his contacts on my phone,when i delete a contact it also deletes it from his phone,we are sharing the same apple ID. How can i stop our contacts from being shared between us
Everything that you have checked in your icloud settings will be shared between devices using the same Apple ID. If you don't want icloud to share that information, then simply turn off that process under settings > icloud
Maybe you are looking for
-
RFC connection error between Netweaver 7 EHP1 and Ides ECC6
Hi Friends, I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3. During the creation I get a connection error, says. check connction parameter. I checked the parameter, everything is fine. Server, System and number. When I went
-
Is there a way to edit multiple videos at once
The thing is that I have a bunch (about 800) of .SWF videos and i need to include in each one of theme a Starting and an Ending scene, I guess i could create an aggretor file but i don't know if it is possible to perform this in a batch editing way,
-
Blackberry pearl and music files
I know there's not a way to transfer music files to a Blackberry Pearl from a Mac using Bluetooth, but I was wondering if anyone knows if there is another way to do it? Using the USB cable perhaps? I downloaded PocketMac and I'm using that to sync my
-
[SOLVED] Re: File Adapter + Debatching + uniquemessageseparator
Hi all I am facing a strange problem using File Adapter + Debatching + uniquemessageseparator. There are two BPEL servers, both with the same version (10.1.3.3) and running the same BPEL process. The process reads an EDI flat file using uniquemessage
-
What is the best way to match back 3rd party vendor data to our SQL Server Database?
So we have this 3rd party data that we need to match back to our database. We have determined that the "ID" column that the 3rd party is sending us back data is a concatenated key of our member's SSN, Gender, and CCYYMMDD Birthdate. In 90% of the cas