How can I stop the intro voice when I play a genius mix
HOw can I stop the intro voice when I play a genius mix?
Hi Diavonex. Yes I was aware of this option.
Subsequently I have done a litle research and downloaded a music app called "Track 8" which has a much clearer interface (larger type) and the abillity to change the background colour to dark or light.
This is much more readable in the car in bright light, and much better at night too.
You can also turn off auto-lock within the application, which is great, as it doesn't affect other apps.
Although this app is really only an interface sitting on top of the music app, it offers a much better experience
in my opinion that the stock player which seems to have devolved rather than evolved.
Similar Messages
-
My new ipod seems to dim after a short time, even when plugged into a power supply, unlike my previous ipod, which used to stay illuminated
when plugged into the car stereo and external power
Now in order to see the playlist I have to swipe or touch the home button, using the music player. However using a GPS app, the screen stays
fully illuminated......as it should!
Is this normal now for playing music?
Also, the new grey on white menu display for music is very hard to read in the car in bright daylight.......unlke the old white on black. Nothing I
can do about that sadly except complain to apple directly :-(Hi Diavonex. Yes I was aware of this option.
Subsequently I have done a litle research and downloaded a music app called "Track 8" which has a much clearer interface (larger type) and the abillity to change the background colour to dark or light.
This is much more readable in the car in bright light, and much better at night too.
You can also turn off auto-lock within the application, which is great, as it doesn't affect other apps.
Although this app is really only an interface sitting on top of the music app, it offers a much better experience
in my opinion that the stock player which seems to have devolved rather than evolved. -
How can I stop the voice over from my apple tv
I have just connected my Apple TV which appears to be working ok. How do I stop the interactive voice from speaking.
I have the 2nd Gen Apple TV and it is where I said. Have you updated yours to the latest firmware/software? I can't see why you are unable to find it otherwise. I will take pictures if you want me to.
-
When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?
In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform. -
I have an Iphone $S, when I am on the phone and I get a new message my phone vibrates and rings, How can I stop this from happneing when I am on the phone
Flip the Ring/Silent switch. Make sure Vibrate when silent is off in Settings>Sound.
-
My macbook keeps locking all of my folders and files, even when I try unlocking them myself in Get Info and disabling autolocking in Time Machine, how can I stop the locking as well as unlock my files?
Managed to solve this myself. Just went to properties > hidden.
-
I am using wireless 4G Wireless Sierra dongle. I have a Mac Air. How can I stop the pop up screen trying to modify configuration when I connect. I can connect with no problems but I have to click 'cancel' (on pop up screen that says network needs to modify my configuration) sometimes as many as 50 times!!! very annoying as the pop up is in middle of screen & won't go away unless i click it. Thank you foray help!
Contact the providers technical support staff.
Ciao. -
I have google toolbar installed on my Firefox 4, whenever I start firefox two tabs open, one is my homepage gmail and the other is "google toolbar updated".
How can I stop the second tab from opening?See these articles for some suggestions:
* [[Firefox has just updated tab shows each time you start Firefox]]
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved -
How can I stop the iWeb welcome movie from appearing
How can I stop the iWeb welcome movie from appearing every time iWeb starts up?
Oh yes and now that we are talking: when I plug in my ipod, I want iTunes to start, not iPhoto.
Who knows these tricks?iPhoto seems to be viewing the iPod as a camera. Therefore go to iPhoto's General preference pane and select No application in the Connecting camera opens: menu.
OT -
how do I stop the sound (bong) when i receive a new email even though my settings are set to vibrate only?
Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.
You can check the properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
Make sure that "Load this bookmark in the sidebar" is not selected. -
Hi One & All
While we are working on Delegate(provider) for JAXWS client handler in Weblogic10 , we have some technical issues and need some assistance.
Problem Description
In OUTBound of a provider, how can we stop the provider invoking its endpoint and send a response back?
Example:
I have a provider with some handlers configured for both IN and OUT flows. When the Jaxws provider is making a request, the OUTBound Handler gets invoked and in this Handler I would like to stop invoking actual endpoint and send back my own response. That means I should be able to tell the Handler chain to stop further processing of this flow, set a response message into message exchange and invoke the IN flow. How do I do that?
This kind of mediation/interception is possible in standard specifications like JAX-WS, Servlets etc… wondering if Weblogic10 JAXWS provides any sort of this kind.
Also we would like to know who is invoking a provider endpo int in JAXWS stack in weblogic10? Is it an OUTBound handler at the end of handler chain or some other transport component after the handler chain?
Thanks in Advance
Suresh
Edited by: user12494412 on Jan 22, 2010 7:06 AMI completely agree with this....I have used Windows and Skype for many years. I recently installed an older version of Skype to run on Windows 8.1 because the new version is SO AWFUL. As much as I prefer the older version (6.14), the daily number of SPAM CONTACT requests is rediculous and most are just variations of the same spammer. Maybe it is time to look for a replacement for both?
-
With the new version of numbers, 3.0, how can I stop the document from moving horizontally? When I scroll up or down I find it annoying that the document might shift to the left, and then I have to scroll it back to the right. The only way I've found to stop it from moving horizontally is by reducing the document down to about 50%, but then I can't read the document. I prefer having the document set at 125%, but then the bottom horizontal scroll bar shows up, and then the document can shift to the left if I'm not exact with my scrolling up or down.
Hi Nels,
Please update your profile. Numbers 3.0 will not run on Mountain Lion (10.8.x)
With the new version of numbers, 3.0
imac, Mac OS X (10.6.3)
iMac, OS X Mountain Lion (10.8.4)
Regards ,
Ian. -
How can I stop the install process?
How can I stop the install process? It tells me my disk is damaged and to restart and repair, but when I restart it tries to install again....it's a never ending cycle. I'd rather keep the system I have than continue this mess.
Hello Serau1s,
It sounds like you are installing Mavericks, and are being prompted to restart and repair your hard drive, but when the computer restarts it goes back to the installation process. The following article should help you get that disk repaired by getting you to the recovery partition, named:
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836
Print this help page so you can refer to it later. (You don’t have access to Disk Utility Help when you restart up your computer in the next step.)In the Disk Utility Help window, choose Print from the Action pop-up menu (looks like a gear).
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done. Otherwise, you may need to do one of the following steps.
If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. Check each file in the list of affected files. If you can replace a file or recreate it, delete it. If it contains information you need, open it and examine its data to make sure it hasn’t been corrupted. (Most of the files in the list have aliases in a DamagedFiles folder at the top level of your disk.)
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.If you continue to have problems with your disk, it may be physically damaged and need to be replaced.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
HT5295 How can I stop the auto play feature automatically playing/streaming the next podcast?
How can I stop the auto play feature automatically playing/streaming the next podcast?
Hi there.
I listened to podcast there were two things I found that helped me out. Both we're in the podcast app itself.
Firstly change the default sorting order. When looking at the list off episodes a available on your ios device tap on the description part at the top, this will bring up the settings for that podcast (subscribe mark as played etc) scroll to the Bottom and select oldest first. This will mean that if you are listening to the latest download it will stop at the end as there will be no more to play.
Secondly, and useful if listening to older podcasts in the list, you can use the timer to stop once the current episode has ended. To do this when you are in the podcast playback screen slide the "album artwork" up, revealing the playback options and nifty tape playing animation this is where you adjust playback speed and set a timer. The timer has a number of options to set playback to stop after set amount of time. However one of these options is to stop once the current episode you are listening to ends. This can also be current chapter if the podcast you are listening to supports chapters.
Hope this helps, if not clear let me know -
How can I stop the program from going through all of the text previously put in. It is making the process very slow.
while True:
and just indent everything else under it
Ends when you press ^C.
if you wish to have a way to break out of the loop, say, when you press enter at the VPC number without entering anything, add the following after your vpc input:
if not vpc:
break
which will break out of the while loop and end your program.
Last edited by buttons (2007-12-14 22:03:06)
Maybe you are looking for
-
My PC hard drive crashed and I had to format my PC. I do not have a back up for my itunes data. How could sync my phone to itunes without loosing my data? If I download itunes and try to sync with my iPhone, is there is any chance to loose my data
-
Reports are not opening after SCCM 2012 R2 Upgrade
Hi, I have upgraded my SCCM 2012 SP1 to R2, After that I am unable to run a report and getting below error System.Web.Services.Protocols.SoapException: The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: Logon fail
-
Please help how do i delete so
Hello, I just recently bought a zen micro and have a few questions. First it comes with a battery. So when i put in the battery there is another thing there like a chips is that a battery too was i suppose to hold onto the other battery? I might not
-
Issue viewing multiple embedded videos in single pdf
Hello, I am having trouble viewing pdfs with more that three videos embedded. For some reason only the first three videos play correctly. All successive videos play a copy of one of the first 3 videos. If I change the order in which I view the vide
-
Premiere Pro CS3 won't see my HD Camera
I have Premiere pro cs3 on my windows XP pro computer. i have a Sony HVR-A1U HD CAMERA. when i plug in my camera through firefire it does not see my camera. any ideas??