How can I stop the No SIM error message

I have been back to my supplier (3G) today and have had a new SIM installed to no avail. I am still getting the NO SIM message on the 3G network.
What can I do ?

I have a similar Mac mini setup running Mac OS X 10.5.6 (Leopard) and I do NOT see that message?
Making a wild guess, by any chance did you configure a Bluetooth keyboard/mouse in System Preferences -> Keyboard & Mouse?
The equipment I have connected to my Mac mini are the ethernet cable and a USB External disk (Drobo w/3TB). Nothing else is attached to my Mac mini.
I only had a keyboard/monitor/mouse connected once when I first set up my Mac mini. I have not needed to connect it to anything since then. And I do not see any messages about missing mouse

Similar Messages

How can I stop the install process?

How can I stop the install process? It tells me my disk is damaged and to restart and repair, but when I restart it tries to install again....it's a never ending cycle. I'd rather keep the system I have than continue this mess.

Hello Serau1s,
It sounds like you are installing Mavericks, and are being prompted to restart and repair your hard drive, but when the computer restarts it goes back to the installation process. The following article should help you get that disk repaired by getting you to the recovery partition, named:
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836
Print this help page so you can refer to it later. (You don’t have access to Disk Utility Help when you restart up your computer in the next step.)In the Disk Utility Help window, choose Print from the Action pop-up menu (looks like a gear).
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done. Otherwise, you may need to do one of the following steps.
If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. Check each file in the list of affected files. If you can replace a file or recreate it, delete it. If it contains information you need, open it and examine its data to make sure it hasn’t been corrupted. (Most of the files in the list have aliases in a DamagedFiles folder at the top level of your disk.)
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.If you continue to have problems with your disk, it may be physically damaged and need to be replaced.
Thank you for using Apple Support Communities.
All the very best,
Sterling

How can I stop the sharing on the iPhones that are in the same account because its sharing every thing even text messages

How can I stop the sharing on the iPhones that are on my account because its sharing everything even text messages and its driving everybody crazy

An icloud account is designed to be used by one user to keep his/her devices in sync.
If you have muitiple family members or friends using the same account as yours, then have them get their own Apple IDs and icloud accounts.
If you mean you want to stop the sharing between all your devices, then on any one device, go to Settings>icloud and turn off the services you don't want that device to share/sync. Or turn off icloud altogether if that's what you want.

How can I stop the flickering/juddering that appears on my iPhone 5's screen?

How can I stop the continuous flickering/juddering that appears, usually after I switch Wi-Fi on, on the screen of my iPhone 5? It has only started occurring since I updated to iOS 7.0.3. Thanks.

It's happening continuously now!

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

How can i stop the itunes update notification

how can i stop the itunes software update notification. I have alreaady unchecked the box to automatically check for updates.

Don't tap the install button.

How can i stop the i tune pop force quit doesn't work

hi ,
please help " how can i stop the i tune pop force quit doesn't work"

Refunds on downloaded software are virtually nonexistent.
I have had cases where I purchase software on a physical disk. If I don't like the software I can uninstall it from my computer and sell it legally. Recouping most of my loss.

How can I stop the oracle XSLT processor from inserting extra whitespace in HTML?

How can I stop the oracle XSLT processor from inserting extra whitespace in HTML?

Use <xsl:output mode="html" indent="no"/> as a top-level element child of your <xsl:stylesheet> element.

How can I stop (the annoying) McAffee Antivirus from downloading every time Adobe Flash needs to upate (which lately is every second day)

How can I stop (the annoying) McAffee Antivirus from downloading every time Adobe Flash needs to upate (which lately is every second day)

don't auto update. manually update and untick mcaffee.

How can I stop the iWeb welcome movie from appearing

How can I stop the iWeb welcome movie from appearing every time iWeb starts up?
Oh yes and now that we are talking: when I plug in my ipod, I want iTunes to start, not iPhoto.
Who knows these tricks?

iPhoto seems to be viewing the iPod as a camera. Therefore go to iPhoto's General preference pane and select No application in the Connecting camera opens: menu.
OT

How can I stop the recent and favorites from show on the screen of my i-phone and i-pad, this is a new feature of iso 8

How can I stop the recent and favorites from show on the screen of my i-phone and i-pad, this is a new feature of iso 8

Hi AppleLove78,
I'm sorry to hear you are having issues with your new iPhone 6. If you continue to have audio or call quality issues, you may find the information and troubleshooting steps outlined in the following article helpful:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
Regards,
- Brenden

I am making an iMovie (HD 6.0.3) using old photos. How can I stop the zoom in on some of the clips?

How can I stop the zoom in on some clips of old photos? I am using iMovie HD 6.0.3 I don't want to take it off of every picture.

Select the photo in your timeline you wish to change, then with Meda/Photo tab open, click the Show Photo Settings button.
In the new window that opens, uncheck Ken Burns Effect.
Matt

In OUT Bound of a Jaxws provider, how can we stop the provider invoking its endpoint and send a response back?

Hi One & All
While we are working on Delegate(provider) for JAXWS client handler in Weblogic10 , we have some technical issues and need some assistance.
Problem Description
In OUTBound of a provider, how can we stop the provider invoking its endpoint and send a response back?
Example:
I have a provider with some handlers configured for both IN and OUT flows. When the Jaxws provider is making a request, the OUTBound Handler gets invoked and in this Handler I would like to stop invoking actual endpoint and send back my own response. That means I should be able to tell the Handler chain to stop further processing of this flow, set a response message into message exchange and invoke the IN flow. How do I do that?
This kind of mediation/interception is possible in standard specifications like JAX-WS, Servlets etc… wondering if Weblogic10 JAXWS provides any sort of this kind.
Also we would like to know who is invoking a provider endpo int in JAXWS stack in weblogic10? Is it an OUTBound handler at the end of handler chain or some other transport component after the handler chain?
Thanks in Advance
Suresh
Edited by: user12494412 on Jan 22, 2010 7:06 AM

I completely agree with this....I have used Windows and Skype for many years. I recently installed an older version of Skype to run on Windows 8.1 because the new version is SO AWFUL. As much as I prefer the older version (6.14), the daily number of SPAM CONTACT requests is rediculous and most are just variations of the same spammer. Maybe it is time to look for a replacement for both?

With the new version of numbers, 3.0, how can I stop the spread sheet from scrolling horizontally without reducing the size?

With the new version of numbers, 3.0, how can I stop the document from moving horizontally? When I scroll up or down I find it annoying that the document might shift to the left, and then I have to scroll it back to the right. The only way I've found to stop it from moving horizontally is by reducing the document down to about 50%, but then I can't read the document. I prefer having the document set at 125%, but then the bottom horizontal scroll bar shows up, and then the document can shift to the left if I'm not exact with my scrolling up or down.

Hi Nels,
Please update your profile. Numbers 3.0 will not run on Mountain Lion (10.8.x)
With the new version of numbers, 3.0
imac, Mac OS X (10.6.3)
iMac, OS X Mountain Lion (10.8.4)
Regards ,
Ian.

How can I stop the intro voice when I play a genius mix

HOw can I stop the intro voice when I play a genius mix?

Hi Diavonex. Yes I was aware of this option.
Subsequently I have done a litle research and downloaded a music app called "Track 8" which has a much clearer interface (larger type) and the abillity to change the background colour to dark or light.
This is much more readable in the car in bright light, and much better at night too.
You can also turn off auto-lock within the application, which is great, as it doesn't affect other apps.
Although this app is really only an interface sitting on top of the music app, it offers a much better experience
in my opinion that the stock player which seems to have devolved rather than evolved.

How can I stop the No SIM error message

Similar Messages

Maybe you are looking for