How can I stop the spinner in the 'checking for mail' column?
Whenever I ope my mail app and read the bottom left column, I see the spinner and 'checking for mail'. Then I see 'sending 1 of 2'. Then the bar fills in, as though 2 mails have been sent. There is no mail sent. Then later I open the app again and it starts all over.
Hello TheTiger81: You made a valiant effort to help me. Yet I went back, opened my mail and the same thing happened all over again. I appreciate your trying to get me beyond this. Makes me sorry I complained about my iPad that kept turning off. This spinner problem seems worse, as I feel it will take a toll on the battery. Thanks very much.
And if you have any other suggestions, I will try them. Do you think I should try your suggestion more than just once?
Similar Messages
-
how can I open the outbox for mail? That is, mail that i have finished and pressed 'send' but has not appeared in the 'sent' folder
The reason it will not be in the sent folder is, it failed to send.
If it failed to send, then you will see the Outbox icon. 'Pending' would be a more descriptive name.
When it eventually sends, the Outbox will not show in the Mail app interface.
Until it is sent it will stay stuck in the Outbox.
If it refuses to send, you can manually delete it in Finder, at the location ~/Library/Mail/Mailboxes/Outbox.mbox
Close Mail first, before you search for that email using the Finder.
Mail version 4.6. Mac OS version 10.6.8 -
How can I change the output for certain columns only?
I am finding it hard to explain my issue , as I am very green when it comes to database, but I will try my best.
I am writing a script that will query a database and output 5 columns, the first and last name of a student, the last name of their adviser, their enrollment status, and how many years they have been enrolled.
I have the student's enrollment date and graduation date stored, however not all students have graduated, so that field is null for some students.
my question is, how can I use their enrollment status of graduated to change the calculation of how long they were enrolled for.
This is what I have so far :
SELECT
STUDENTS.NameFirstS,
STUDENTS.NameLastS,
STUDENTS.EnrollStatus,
TRUNC((MONTHS_BETWEEN(SYSDATE, STUDENTS.EnrollDate))/12) as Years,
FACULTY.NameLast
FROM
STUDENTS,
FACULTY
WHERE
STUDENTS.ThesisAdvisor = FACULTY.FacultyId
I'm not sure where to go form here, like I said, I am very new. Thank You in advance!Thank you for the warm welcome :)
My Oracle Version is 11.2.0.1.0
Here is the create statement I used for the table.
CREATE TABLE STUDENTS
(StudentId NUMBER(9)
,NameFirstS VARCHAR(255) NOT NULL
,NameMiddleS VARCHAR(255)
,NameLastS VARCHAR(255) NOT NULL
,PhoneHome NUMBER(10) NOT NULL
,PhoneOffice NUMBER(10)
,HomeCity VARCHAR(255) NOT NULL
,HomeState VARCHAR(255) NOT NULL
,HomeStreet VARCHAR(255) NOT NULL
,EnrollDate DATE NOT NULL
,EnrollStatus VARCHAR(255) NOT NULL
,StudyArea VARCHAR(255) NOT NULL
,SpouseNameFirst VARCHAR(255)
,SpouseNameLast VARCHAR(255)
,ThesisTitle VARCHAR(255) NOT NULL
,ThesisInternational VARCHAR(255)
,ConvocationDate DATE
,ThesisAdvisor NUMBER(9) NOT NULL
,Mentor NUMBER(9) NOT NULL
,CONSTRAINT STUDENTS_pk PRIMARY KEY (StudentId)
,CONSTRAINT STUDENTS_Mentor_fk FOREIGN KEY (Mentor)
REFERENCES FACULTY(FacultyId)
,CONSTRAINT STUDENTS_ThesisAdvisor_fk FOREIGN KEY (ThesisAdvisor)
REFERENCES FACULTY(FacultyId)
And here is 2 inserts of random data
INSERT INTO STUDENTS (StudentId, NameFirstS, NameMiddleS, NameLastS, PhoneHome, PhoneOffice, HomeCity, HomeState
, HomeStreet, EnrollDate, EnrollStatus, StudyArea, ThesisTitle, ConvocationDate, ThesisAdvisor, Mentor)
VALUES(778506631
, 'John'
, 'Jacob'
, 'Smith'
, 3125551234
, 5182293313
, 'Wilksbury'
, 'Texas'
, '14 Main Road'
, TO_DATE('04-SEP-2003', 'DD-MON-YYYY')
, 'Graduated'
, 'Physics'
, 'Why Move'
, TO_DATE('07-JUL-2008', 'DD-MON-YYYY')
, 157928743
, 997569876
INSERT INTO STUDENTS (StudentId, NameFirstS, NameLastS, PhoneHome, HomeCity, HomeState, HomeStreet
, EnrollDate, EnrollStatus, StudyArea, SpouseNameFirst, SpouseNameLast, ThesisTitle, ThesisInternational, ThesisAdvisor, Mentor)
VALUES(251321188
, 'Larry'
, 'Timsfield'
, 2815551200
, 'Johnsburg'
, 'Florida'
, '223 Route 54'
, TO_DATE('09-SEP-2010', 'DD-MON-YYYY')
, 'Full Time'
, 'Medicine'
, 'Wanda'
, 'Timsfield'
, 'Cut Me Mick'
, 'Yes'
, 997569876
, 101325587
I don't know how to format them like you did in your reply, so they look like a quote, so I hope that just pasting them in is okay. -
How can I stop the sharing on the iPhones that are on my account because its sharing everything even text messages and its driving everybody crazy
An icloud account is designed to be used by one user to keep his/her devices in sync.
If you have muitiple family members or friends using the same account as yours, then have them get their own Apple IDs and icloud accounts.
If you mean you want to stop the sharing between all your devices, then on any one device, go to Settings>icloud and turn off the services you don't want that device to share/sync. Or turn off icloud altogether if that's what you want. -
How can I stop the flickering/juddering that appears on my iPhone 5's screen?
How can I stop the continuous flickering/juddering that appears, usually after I switch Wi-Fi on, on the screen of my iPhone 5? It has only started occurring since I updated to iOS 7.0.3. Thanks.
It's happening continuously now!
-
When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?
In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform. -
How can i stop the itunes update notification
how can i stop the itunes software update notification. I have alreaady unchecked the box to automatically check for updates.
Don't tap the install button.
-
How can i stop the i tune pop force quit doesn't work
hi ,
please help " how can i stop the i tune pop force quit doesn't work"Refunds on downloaded software are virtually nonexistent.
I have had cases where I purchase software on a physical disk. If I don't like the software I can uninstall it from my computer and sell it legally. Recouping most of my loss. -
How can I stop the oracle XSLT processor from inserting extra whitespace in HTML?
How can I stop the oracle XSLT processor from inserting extra whitespace in HTML?
Use <xsl:output mode="html" indent="no"/> as a top-level element child of your <xsl:stylesheet> element.
-
How can I stop (the annoying) McAffee Antivirus from downloading every time Adobe Flash needs to upate (which lately is every second day)
don't auto update. manually update and untick mcaffee.
-
How can I stop the iWeb welcome movie from appearing
How can I stop the iWeb welcome movie from appearing every time iWeb starts up?
Oh yes and now that we are talking: when I plug in my ipod, I want iTunes to start, not iPhoto.
Who knows these tricks?iPhoto seems to be viewing the iPod as a camera. Therefore go to iPhoto's General preference pane and select No application in the Connecting camera opens: menu.
OT -
How can I stop the recent and favorites from show on the screen of my i-phone and i-pad, this is a new feature of iso 8
Hi AppleLove78,
I'm sorry to hear you are having issues with your new iPhone 6. If you continue to have audio or call quality issues, you may find the information and troubleshooting steps outlined in the following article helpful:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
Regards,
- Brenden -
How can I stop my iphone 4s from asking for my icloud, yahoo and other passwords all the time?
As long as you share that AppleID for iCloud, you cannot. You are sharing a a single iCloud account and sync services. The only thing you can do is get a second AppleID and use it with iCloud - you do not have to use that new AppleID for anything but iCloud (ie. you can still share an AppleID for iTunes and App store purchases).
P.S. I am assuming you both want to sync your contacts with iCloud? -
How can I stop the zoom in on some clips of old photos? I am using iMovie HD 6.0.3 I don't want to take it off of every picture.
Select the photo in your timeline you wish to change, then with Meda/Photo tab open, click the Show Photo Settings button.
In the new window that opens, uncheck Ken Burns Effect.
Matt -
Hi One & All
While we are working on Delegate(provider) for JAXWS client handler in Weblogic10 , we have some technical issues and need some assistance.
Problem Description
In OUTBound of a provider, how can we stop the provider invoking its endpoint and send a response back?
Example:
I have a provider with some handlers configured for both IN and OUT flows. When the Jaxws provider is making a request, the OUTBound Handler gets invoked and in this Handler I would like to stop invoking actual endpoint and send back my own response. That means I should be able to tell the Handler chain to stop further processing of this flow, set a response message into message exchange and invoke the IN flow. How do I do that?
This kind of mediation/interception is possible in standard specifications like JAX-WS, Servlets etc… wondering if Weblogic10 JAXWS provides any sort of this kind.
Also we would like to know who is invoking a provider endpo int in JAXWS stack in weblogic10? Is it an OUTBound handler at the end of handler chain or some other transport component after the handler chain?
Thanks in Advance
Suresh
Edited by: user12494412 on Jan 22, 2010 7:06 AMI completely agree with this....I have used Windows and Skype for many years. I recently installed an older version of Skype to run on Windows 8.1 because the new version is SO AWFUL. As much as I prefer the older version (6.14), the daily number of SPAM CONTACT requests is rediculous and most are just variations of the same spammer. Maybe it is time to look for a replacement for both?
Maybe you are looking for
-
Can not receive my emails.
can not retrieve emails from iCloud.
-
jdeveloper version: 10.1.3.2.0.4066 jheadstart version: 10.1.3.1.25 I have just installed both of the above and am receiving errors on compilation in both my viewcontroller and model projects. I receive the following error on the view project as soon
-
I can no longer connect to wifi with the my phone. This is very troubling. I am planning on getting a new non-apple phone.
-
Photoshop CS4 (11.0.2) crashes when file opens (Windows 7 x64 Pro)
Did a recent install of Windows 7 x64 Pro and installed Adobe Web Suite and updated all adobe programs. When I use photoshop to open a file, the file opens then photoshop hangs and windows says it has stopped responding then closes. This is a fresh i
-
ORA-00936: Missing Expression when using a claculation as a condition item
Hi I created a calculation below to create a subtotal on each row of a group of selected items. SUM(Invoice Amount)OVER(PARTITION BY Supplier Num ORDER BY Payment Currency Code) This worked fine - but then I wanted to create a condition based on this