How can i suppress the bus off of a NI CAN card without resetting the device

I want to resume my CAN application from a bus off without setting up all my tasks again.
Is there any solution known for this issue?

Hi,
if you use frame API, try ncAction -> Reset. You could also try to stop and start the task again.
Let me know if that helps.
Kind regards,
Andreas S
Systems Engineer

Similar Messages

If you deleted a device off of find my iphone.how do you get the device to start back up agian and put it back on find my iphone?

if you deleted a device off of find my iphone.how do you get the device to start back up agian and put it back on find my iphone? becuase i have delted my dads iphone acedentily of find my iphone and it is nownot working. his phone is just staying at a black screen with a loading circle on it. i need to know how to fix this..like do i go the to apple store or the carrier store or can i fix it at home?

Try these two ways to fix the iPhone (in order). If neither works, you would have to take it to the store.
1. Reset the iPhone. Hold the on/off and home buttons togehter for about 10 seconds. If it works, you'll get the Apple logo and then something good should happen.
2. Try recovery mode as described here:
http://support.apple.com/kb/HT1808
If one of these work, you can then re-introduce the iPhone to Find My iPhone by doing Settings > iCloud > Find My iPhone = "On" on the device.

TS3276 When responding to an email, how do I suppress the "line" that appears on the left side of the originations email text?

When responding to an email, how do I suppress the "line" that appears on the left side of the originations email text?

Would you post a screen shot of a message so people can see what you are seeing? Make sure you cover any personal information using Preview. Post the screen shot in a Reply using the camera icon. Copy and paste doesn't work.
Screen shots

How can I see my USB device in the measurement&automation explorer?

I'm trying to use an USB-device with LabView7.0.
I followed the manual "using NI-VISA3.0 to control your USB device" which I found on the NI-webpage.
I generated an .inf file using the VISA driver developement wizard and installed it in the INV folder of my system (I'm using Win2000).
The following problems occured: after I connect my USB device the "add new hardware wizard" pops up and aks for a driver for the new hardware. when I direct it to the folder with the generated .inf file it doesn't accept this file as a driver.
second: the USB device doesn't appear in the measurement&automation explorer. I assume that as long as my device doen't appear there it is not recognized by NI-VISA and the comm
unication from LV wouldn't work?
How can a make my USB device visible in the meas.&aut. explorer?
Regards
Tobias

Tobias,
In the VISA Driver Development Wizard, you are required to specify the Vendor and Product ID. These numbers are what Windows will use to determine whether a specific driver is appropriate for a given device. If these numbers do not match between your device and the Windows driver (INF file) that you generate, you will see the behavior that you describe. Check to make sure that you are using the appropriate values. Also, did you right click on the INF file and install it as directed in step 2.2.2?
Page 5-87 of the VISA Programmer's reference manual specifies how to do a viOpen to a USB device in RAW mode, but you still need the same sorts of Product ID and Mfg ID that you needed for the INF file generation. Furthermore, if you are communicating with
your instrument directly, you will need to know exactly what command set it expects, so make sure you get that from the manufacturer as well. Finally, I want to mention that if this device complies with the USBTMC standard, then none of this is necessary--the steps above are for setting up a RAW USB connection. See this link for information.
Scott

How do I suppress the Font Mapping alert?

How do I suppress the Font Mapping alert?
We're using a Font Library fla, and the alert blocks the compiler, which blocks our build.
Let's say you have main.fla and fonts.fla. Main.fla doesn't have the font included in it (we don't want to bloat it). But this causes the Font Mapping dialog to come up.
Because it requires user interaction, this blocks our build from running.
Please advise.
Thanks,
Casey

Hi Casey,
Would you mind reposting this question over on the Flash Professional forums (http://adobe.ly/XnCf1)? This forum is primarily for end users, the Pro forums will get you in touch with a wider developer audience.
Thanks,
Chris

I've lost my password for my Airport, and cannot set up AppleTV without it. How can I either reset or recover the password?

I've lost my password for my Airport, and cannot set up AppleTV without it. How can I either reset or recover the password?

While you can reset your password, it might be wise to first check and see whether you can retrieve it, which will save you some time as far as setting up new connections on all of your devices with a new password.
On your iMac.....
Open Finder > Applications > Utilities > AirPort Utility
Click on the AirPort router icon, then click Edit in the smaller window that appears
Click the Base Station menu at the top of the screen....up where the other File, Edit, Window, and Help menus reside
Click Show Passwords

How can i change (reset) my i cloud passport if i had forgotten the old one?

How can i change (reset) my i cloud passport if i had forgotten the old one?

The following has instructions: If you forgot your Apple ID password
If you cannot complete the steps there then contact Apple Support: Apple ID: Contacting Apple for help with Apple ID account security

How can you soft reset an iphone 4s when power on/off button not working

How can you soft reset an iphone 4s when your on/ off button is not working?
My voicemail messages are unobtainable and i'm trying to work out how to fix this.

Sorry you don't.

TS4006 How can I turn on my device so I can locate my stolen I Phone??? And if not; how can I pettition APPLE that there is a defect in "Find My I Phone". If its stolen do I need device to be on in order to find????

How can I turn on my device remotely so I can locate my stolen I Phone???
And if there is a way but I just don't know then educate me please!!!!
And if not then how can I petition APPLE that there is a defect in "Find My I Phone".
If its stolen I should not need device to be on in order to find unless I can turn on remotely!!!!
Also another defect is that if the device is locked with a code then it should be really locked......
Why is it that you can still use buttons??????........
You should not be able to turn off unless you have the code!!!!!!
And with that defect corrected imagine how safe it would make the consumers if everyone knew that if a phone was locked, it was really locked!!!
Everyone would be able to find their phones and nobody could stop them from them finding their phones!!!!!
PROBLEMS SOLVED!!!!!! NOBODY'S I PHONE WOULD EVER BE STOLEN!!!!!!
Does anyone know can you turn on remotely??????

You cannot turn it on remotely. Griping and complaining won't make it any better.
What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

How can i master reset my phone

how can i master reset my phone

1) Using iTunes, restore it or 2) on the phone itself, Settings > General > Reset > Erase All Content and Settings.
Before doing this, do the following if you're going to sell it and not set it up for your use...
Settings > Messages > iMessage > Off
Settings > FaceTime > Off
Settings > iCloud > Delete Accout (this only unregisters and deletes it off the iPhone)
Settings > General > Reset > Erase All Content and Settings

How can i remove an associated device from my iTunes account?

how can i remove an associated device from my iTunes account?

Hi..
See, "Removing an associated device or computer from an Apple ID" here > iTunes Store: Associating a device or computer to your Apple ID
Your iTunes account is the same as your Apple ID.

How can i add a new device

how can i add a new device to Itunes

Not sure what your post's title means, but you can only add a device to your iCloud account directly on the device e.g. log into the account in Settings > iCloud
If your iPad isn't showing in your computer's iTunes when you connect it to your computer then is your iTunes up-to-date ? There is also some troubleshooting for a device not showing on these pages :
PC : iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Mac : iOS: Device not recognized in iTunes for OS X - Apple Support

How can i write to ntfs device

how can i write to ntfs device from mac

By default, OS X (and near all operating systems different than Windows) can't write in NTFS drives because of a Microsoft limitation.
To be able to write in NTFS drives, you have to use a third-party application. There are a lot, but the most recommended is Paragon NTFS, although it's a paid application. If you want a free app, try this > http://osxfuse.github.com

How can get emails on all devices?

How can get emails on all devices? When I read an email on my mac, my iphone doesn't download it. How can I change that setting?? I need to have all emails and all my devices!

It sounds like your using a POP3 email account versus IMAP. With a POP3 account if you do not have the settings configured to leave email on the server the problem you describe will occur. With Outlook 2010 (on a PC for example) you can go into the account settings and configure to leave email on the server. That way both devices will see the email. Check help for your Mac email program for instructions...
http://www.serverintellect.com/support/email/outlook-leave-on-server/
A better solution is if your email provider uses IMAP. IMAP sync email folders between multiple devices. Meaning any device will receive the email, all sent email can be seen on the devices. If you delete email from one device the email is deleted from all the other devices. Check with your email provider to see if they offer IMAP services.
If they do not your choices are to 1) configure email on the Mac as illustrated in the link above or 2) change email providers to something like Gmail or Outlook.com (as examples).
Also see this for the iPad...
Using a POP account with more than one device - Apple Support
FWIW I use Cox IMAP email and fully sync email between a Win 8.1 Update 1 laptop, a Win 7 desktop, an iPad 4, an iPhone 4 and an iPhone 5S.

How can I fix/reset a constantly out-of-date update?

There's an update, (doesn't really matter which one), which claims to be out of date. So I update it. And then... it claims to be out of date again.
How can I clear/reset/fix this? Is there a database somewhere of these things that I could clear out manually?

I think I found the problem here and there is no solution from Apple.
The problem is that the update in question is broken. It uses inconsistent file names with respect to case, so on case sensistive file systems it always appears out of date. This is just grossly insufficient QA on Apple's part and should never have been released as is.
But, of course, there's no going back to rerelease it now so we're just screwed on this one.

How can i suppress the bus off of a NI CAN card without resetting the device

Similar Messages

Maybe you are looking for