How can I suspend an App instalation

How can I suspend an App's instalation  in my Ipad 2 that doesn't respond, I was installing an App, in the Ipad appeared a grey Icon named Waiting (esperando) and the App screen said Installing, but the process never ends.
I have rebooted the Ipad several times but the instalation continues freezed
What can I do???
Thanks
Pedro

Apps stuck in waiting or won't download
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Similar Messages

  • How can I force an app install in App Store, or otherwise get App Store in a consistent state?

    I've recently reinstalled OS X Mountain Lion on a laptop (completely and thoroughly erased the partitions of the previous installation), and on this freshly created system, after I sign in to the App Store (to download previous purchases), the system behaves as if packages are already installed - which they are not!
    Under the Purchases tab, packages (such as Xcode or other previous purchases) are showing with a greyed out "INSTALLED" button on the right.  Other packages (which have not been installed) are showing with a (pressable) button of "UPDATE".  (For example, iPhoto has a newer version in Mavericks; it seems always possible to click on UPDATE and be prompted to install the latest version for Mountain Lion -- even though that process can be infinitely repeated).  But iPhoto (along with any other packages) has not been installed to the host yet.  /Applications/iPhoto.app and any others are not showing at all on the system, but App Store still believes that they're installed already (preventing a real install, or pretending that an upgrade is an upgrade and not an install).  There are some packages which DO say "INSTALL".  Those are the ones that I have never installed before on the laptop.  So it appears to be possible to still install some packages - but that's the set that I do not want to install.  So for example, now I can't seem to install Xcode or iPhoto or any other previously purchased applications.  It seems pretty clear that there are some bugs here.  But I am concerned about the source of the association - how is OS X determining that THOSE packages are "installed already", but others are not?  Is the upstream App Store server keeping track of machine ID to make this determination?  I heard at one point that App Store uses Spotlight internally - is it somehow querying that?  Finally I wanted to confirm that this is really a complete reinstall.  I set /dev/zero to the first few sectors of the raw hard drive in order to ensure that I could make a few partiiton table, and when I then reinstalled the system, I chose a different partition arrangement.  I have no other drives connected.  So it's truly a reinstall of the OS from scratch, and at the moment I can't see a clear way to install apps!  I also had killed the App Store agent running in the background, moved away App Store related files in ~/Library/Caches/ and started again.  Yet I get the exact same response.  This is concerning from a privacy perspective too.  Suppose the App Store server is encoding the list of installed packages and associating it with the host and then perhaps I sell the laptop.  Now the list of apps may be available to a new user of the laptop.  But it may only show if the same Apple ID is used.
    In any case, I'd like to know how I can best move past this issue, workaround it, and install packages.  Can I force an app to install, even if it's believed to be installed already?  Can I attempt to do an "uninstall"?  Any suggestions about this would be greatly appreciated.

    i also have a very similar problem my mac crashed due to a dodgy hard drive which has now been upgraded and snow leopard reinstalled and i cannot re install my purchased apps which is a pain in the back side any help please

  • HT1296 I purchased a macbook pro online this fall and had iWork and iLife apps pre-installed when I purchased it.  How can I get these Apps onto my iPhone 4s without paying for it again?

    I purchased a macbook pro online this fall and had iWork and iLife apps pre-installed when I purchased it.  How can I get these Apps onto my iPhone 4s without paying for it again?
    On my iphone those apps still require me to purchase them.

    The MacBook versions run on a Different Operating System...
    You will need to Purchase the iOS iPhone versions

  • I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else.  How can I get the app to function again?

    I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else.  How can I get the app to function again?
    This happened after I tried to get Readdledocs to open an epub file which I created in Calibre.

    This is a followup to my own posting above.
    Thanks to Dave Sawyer for posting information about re-downloading an app which has been deleted.  I deleted the app from iTunes.  Then, when I synched, iTunes asked me if I wanted the items on my ipod touch copied back into iTunes.  I said yes and then synched.
    Readdledocs is now working again.  It is no longer frozen.  However, I have learned my lesson.  I will download only pdf's from now on.  I don't think it works so well with epub files.  The text reflow feature of Readdledocs is exactly what I need to use for my work documents on my ipod touch.

  • IOS obviously allows only 10 Apps to be Chosen in The "Open in" function. How can I control which Apps ( if more than 10 are installed) can be selected?

    iOS obviously allows only 10 Apps to be Chosen in The "Open in" function. How can I control which Apps ( if more than 10 are installed) can be selected?

    I think that is influenced by the order in which the apps are installed on the iPad (I believe that it's the most recent 10 ?) - but as I haven't got more than 10 apps that support any document/file type I can't check.
    If you want to able to edit the list, then you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • How can I deactivate Adobe apps that were installed on a computer that is no longer available?

    How can I deactivate Adobe apps that were installed on a computer that is no longer available? I have a Creative Cloud membership, and I want to deactivate a device that is no longer available. I would have thought that there would be an option to deactivate all devices somewhere in My Account, but I can't find it.

    Hi acornies,
    There is no such option readily available under which you are able to deactivate the product on all the devices . As per the EULA , you are able to install the product on two machines only and once you try to have the product installed on a third machine that would provide you with an error message and an option to deactivate the products on all the previous installation .
    So , if the machine that you would be installing the product onto is going to be your third machine , you will be getting an error message that you have reached your activation limit and there would be a button to click on continue to deactivate all the prev installation .
    Please let me know if this works for you .
    Regards,
    Kartikay Sharma

  • HT1977 I downloaded an app on my PC, signed into my iTunes account, but when I connect my iPhone and click sync, it won't copy to my phone. How can I get this app to install on my phone?

    I downloaded an app on my PC, signed into my iTunes account, but when I connect my iPhone and click sync, it won't copy to my phone. How can I get this app to install on my phone?

    Your phone connected, iTunes running, under the "Apps" tab, you've selected this app to install on your phone, correct? Hit the "Apply/Sync" button, lower right on the Apps tab, what happens?

  • How can I change the appe ID that is registred in my Ipad? It was bought for a friend and he put his own ID. I have my ID but I don' t know how I can install it in my Ipad

    How can I change the appe ID that is registred in my Ipad? It was bought for a friend and he put his own ID. I have my ID but I don' t know how I can install it in my Ipad

    Tap on the id in Settings > Store and log out of it and then log in with your id. But if there is any content on the iPad from his account then you are probably better off resetting back to factory defaults via Settings > General > Reset > Erase All Content And Settings and starting 'as new' with it - content is tied to the id that bought/downloaded it so your account won't be able to download updates to any of his apps, and unless his account is authorised on your computer's iTunes and his content is on there then it will be deleted when you sync to it.

  • How do I delete an app installed with an old iTunes account?

    How do I delete an app installed with an old iTunes account? After syncing my iPhone with iTunes, the app is not listed in the App section.

    To delete an app from your iphone, press and hold any icon until they all start wiggling. Apps that you can delete will have a circled x in the top left corner of the icon. Tap that circled x to delete. Tap home button to stop the wiggling.

  • I just updated the OS to 10.6.8 but then i never get the app store that supposed to be included in the update. so now, how can i download the app store?

    i just updated the OS to 10.6.8 but then i never get the app store that supposed to be included in the update. so now, how can i download the app store?

    Hi,
    Have you tried a Restart since doing the Update...?
    If Yes and you still don't have it...
    Download and Install the 10 6 8 Combo Update from here
    http://support.apple.com/kb/DL1399
    Cheers,

  • How can i download an app that i bought from the app store but is no longer avalaible?

    hi, i recently changed my iphon from 4 to 5 and when i try to re-install the apps i found that tubebox is no longer available on the app store. how can i get the app now?

    First, make sure that sync automatically is disabled: iTunes>Preferences>Devices. Then connect your iPad, do not sync, right-click in the left device pane: Transfer Purchases.
    That should put it in your app library, & if a universal app, just sync it to your phone.

  • How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.

    How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.
    I tried to use the attached command through TERMINAL :
    sqlite3 ~/Library/Application\ Support/Dock/*.db "DELETE from apps WHERE title='Help';" && killall Dock
    sqlite3: Error: too many options: "DELETE from apps WHERE title='Help';"
    Use -help for a list of options.
    But i didn't work as I got the above error message.
    best regards
    Jeroen

    I'm in the same boat as you -- except that I manage both a school lab (volunteer job) and macs in the enterprise (pay job).  What I think we need is the Education Volume Purchasing Program
    http://www.apple.com/education/volume-purchase-program/faq.html
    Unfortunately this all seems a little rough around the edges -- for example, I have found updates for AppStore apps on the support.apple.com updates download site, but then when I install them via ARD they don't actually update the software.  (The AppStore icons still show as needing the updates, and the version info reports the old version.)  The documentation is also vague about which AppleID to use in which circumstance.  I think they just haven't finished thinking through the implications of the various procedures and policies upon the various kinds of customers.  When we deployed Mountain Lion on the school lab, we made an install usb and went around and installed it on each computer -- and it appears that you are on the honor system as far as paying for all of the licenses that you install.  We did!  But they appear to have no way to enforce it.
    So far, I have only deployed 9 Lion macs in my day job, and our "solution" to the AppStore showing updates problem has been to drag the AppStore icon off of the users' docks so they don't see them!

  • My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?

    My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?

    Can you start Firefox in [[Safe mode]] ?
    You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can initially skip the step to create a new profile, that may not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Can someone please assist me. I was given an iPod 3G as a gift and I tried to download various apps and it told me that my iPod needs to be iOS 7 or more but I checked and my iPod is at its latest upgrade which is 6.1.6, how can I get those app?

    Can someone please assist me. I was given an iPod 3G as a gift and I tried to download various apps and it told me that my iPod needs to be iOS 7 or more but I checked and my iPod is at its latest upgrade which is 6.1.6, how can I get those app?

    See a a version compable with your iPod is available:
    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.
    Also, if you have iOS 6.1.6 yo have a 4G (has cameras). A 3G does not have cameras and can only go to 5.1.1

  • How can i use the apps i have downloaded on itunes

    how can i use the apps i have downloaded on itunes

    Apps downloaded through iTunes will only run on iOS devices such as iPhones, iPod Touch, and iPads. Plug your device into your computer, open iTunes, and click on it in the bar either at the top or the left side. Then, click apps at the top, and click install next to the app you want installed.
    If you are looking for apps to run on your Mac, you need to download them through the Mac App Store, not through iTunes.

Maybe you are looking for

  • Message GU506 when branching to line item report

    We have carried out a shortened fiscal year change and now when we use a existing report painter report to branch to the line item report, then the system generates Message GU506: "Posting period & is not defined for fiscal year variant &" I have fou

  • TableModel with SORT and GROUP BY functions solution.

    Hello all, I'd like to represent an EnvelopeTableModel. This class is developed to incapsulate another TableModel and allow user to reorder and group data without changing original values and orders. It allows to perform multi column sortings and gro

  • In Design CC Timeline

    Is there a way to better structure the timeline? Having just learned it, it seems that you need to name every item and and have all in exact order that you want it to play - i.e. no trial info in there - makes doing the job really difficult. Also - c

  • Where should I start learning

    Hello! I am very new to appdev. I am keen to develop in this field. Where should I begin!!! Please advice some beginners guide or pointer. Reg Dhananjey

  • How to get rid of "Previous" en "Next" header in UIX Table?

    I have the simplest of UIX tables in my page, showing a single column of dates: <table model="${bindings.Startmoment}"> <contents> <column> <contents> <styledText model="${uix.current.myDate}"/> </contents> </column> </contents> </table> This renders