How can i swicth between graphics cards

i have updated to the latest BIOS version- form the menu of nvidia graphic card i cannot select the video player on which graphic card to run- the graphic cards doesn t switch when i watch a movie or work in excel.- if i disable the on board grafic card the laptop runs like it has no graphic card installed- from time to time i have horizontal lines that goes form bottom to the top of the screen- graphic card is Nvidia GT 820M 1 GB. Can anyone help me with these problems?

Hi, Please try (a) Right click a blank space on desktop,(b) Open NVIDIA Control Panel You can select from the following menu:     Regards.  

Similar Messages

  • How can I measure the Graphics Card usage? I.e. percent load

    Hello,
    How can I measure the Graphics Card usage, like with the processor in Task Manager, but instead giving a percentage usage for the graphics card instead? Is there an easy way to do this, or would it require a lot of code? Is it even possible?

    Ah, so It's unlikely that Java3D will include anything for reading this data then? I was really aiming at measuring the GPU usage under this API which although i have limited knowledge using, I do at least have some knowledge - I wouldn't have a clue how to access any other API's!
    I'm using an NVidia TNT2 card at the moment, which is quite old.

  • [p7-1240] How can I tell which graphics cards will work with my motherboard?

    I recently went through the nightmare of trying to install a Gigabyte GTX 650 in my PC. After a few days of struggling and scouring the internet for answers, I discovered that it is incompatible with the BIOS on my motherboard, and HP does not offer BIOS updates. I returned the card and am now looking for a new one, but I am unsure of which cards will work now, since my computer met all of the system requirements for the graphics card, and It stil ldid not work. Since GPU manufacturers do not list BIOS specs under system requirements, how can I tell if a graphics card will work with my sytem?
    My computer is a p7-1240 with an upgraded 520W PSU and approximeately 11" of room to install the card.
    This question was solved.
    View Solution.

    Thexn, welcome to the forum.
    The problem is, many of the newer video cards require the computer to have a full UEFI BIOS.  HP began using one in mid-October, 2012.  Before this date the BIOS is Legacy.  This is why the video card didn't work with your computer.
    I don't know what you want to spend for a card, but MSI makes a GTX 750ti that has a hybrid VBIOS.  It has a switch to change to Legacy or UEFI.  There is a video link directly below the picture of a card.  Paul from Newegg gives a full description of the card.
    I like EVGA cards the best.  Their Tech Support has given me a lot of information about their cards.  However, you have to go back to a GT 640 card to find one of their cards that doesn't require the UEFI BIOS.  They do have some updates for their BIOS'es that solve the problem, but you have to call them for the exact cards.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Mid-2012 RMBPro 10.9.4: Is it possible to switch between graphic cards?  Activity monitor shows the high perf card always active even through no running apps need it.

    How does one switch between graphics cards on a RMB Pro that has both a regular and high performance card installed?

    There's no control built into OS X to manually switch between them (that I know of). But in your Energy Saver preferences, there is setting called Automatic Graphics Switching that will either keep the discrete GPU on all the time, or automatically switch it off when not in use. Do you already have this preference turned on?
    It might keep the high performance graphics card on if it's plugged into AC power, since there is no battery life penalty in that case.

  • How can i get my bank card off my apple id account

    how can i get my bank card off my apple id account. i have recently found out that money has been coming out of my bank account that im not spending, we figured it is a glitch in between the ipad that me and my grnddaughter have. she used her apple id on my ipad 3 when i first got it and then i changed it over to mine but then she got a ipad 4 adn started using her apple id on it but every thing she buys or her friend that has used her account but got off of it and then bought stuff off of their own account, but for some reason everything they buy on there accounts money comes out of my bank account because she used her apple id on my ipad and then we switched it over to mine........ so some one please tell me how to get my bank card off of my apple id account and how to possible try to get my money back.... because it has took 80 bucks out of my bank account for 2 months and i cant afford that its to close to christmas for this so please help me..

    iTunes Store: Changing your payment information
    http://support.apple.com/kb/ht1918
    iTunes Store Accepted Forms of Payment
    http://support.apple.com/kb/HT5552
     Cheers, Tom

  • HP 15 Special Edition p000 - How do I update the graphics card?

    received this message trying to run Windows movie maker. Cannot see the video i was editing. It worked before...Can i update the graphics card online? please help link me....or do i have to buy a new card and get it installed

    Hi @DP21 ,
    Welcome to the HP Forums!
    It is a wonderful place to find answers and ideas!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I see from your post that you are unable to run Windows Movie Maker 2012 as you receive an error that your graphic card only  support  Direct X 9.
    You can run the HP Support Assistant  to look for updates.
    I am unsure if this is your exact model or not but here is the  link to the driver page  HP Beats Special Edition 15z-p000 CTO Notebook PC Drivers
    As this is a CTO model I can not pull up your exact build information.  If you would private message me with your serial number I will try to obtain your exact specifications.  Do not post it in the public forum as it is private information and would be in violation of the rules.
    Have you done all your Windows updates as Direct X is a microsoft program.
    I hope this helps
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • I have siemens plc s7-300 and labview how can i communiction between plc and s7-300

    Hi all good  morning
     iam new user for labview
    now iam working one new projects with labview and s7-300 automation plc  so how can i communication between plc and s7-300 using profibus or ethernet cables can any one help me with example
    thanks
    best regards
    vijaynagar.

    Dear vijaynagar,
    it would be posible to communicate with our Comsoft PROFIBUS products like DF PROFI II, FNL or cRIO PB.
    Please have a look at:
     - DF PROFII:  PCI, PCIe, C-PCI or PC104+ card with LabVIEW drivers: Link
     - FNL: Ethernet/PROFIBUS Gateway: Link
     - cRIO PB, C-Series module for National Instruments FPGA chassis: Link
    The DF PROFI II can be bought directly from Comsoft, the cRIO PB can be bought from National Instruments.
    Regards,
    Sven
    P.S. If you have any questions feel free to contact: [email protected]

  • I have three iPads and one iPod and one iPhone.  How can I message between them without sending the message to all of them.  You send the message to your email address but all of them are set up und one account.

    I have three iPads and one iPod and one iPhone.  How can I message between them without sending the message to all of them.  You send the message to your email address but all of them are set up under one account.

    You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

  • How can i delete my credit card i lost my card so i cant use it anymore so i wanna delete that.

    how can i delete my credit card on my apple account? i lost my card so i can't use it and because of that i can't use my account to update or download apps plz help me asap

    On your device:
    Settings > iTunes & App Stores > tap ID > sign out > sign in with corrected credit card info
    On your computer iTunes:
    iTunes menu > Store > View account > edit payment type

  • How can I share between 2 different accounts.  we have a clinic that serves pediatics and unfortunately, they set up two different accounts within our agency.

    How can we share between two different accounts on the same iPad?  We have a therapy clinic with 2 devices and want to share apps. I did not set up the second one, but how can we fix this ?

         Hi Rosdy, to get the most out of iCloud it is recommended that you use the same account between devices. Thus whenever you buy something on your phone it becomes accessible from your laptop regardless of whether your synced it over usb or not. *
         For more information on iCloud usage please click here.
    * This feature requires that both devices be on the same WiFi network.

  • How can i distinguish between set or tuples from incoming filters in a calculation

    How can i distinguish between set or tuples from incoming filters in a calculation. i am using descendants function with the leaves option to calculate some project revenue cause there is different calcuation method on sub projects the sum on the main project
    should reflect the sum of the sub project with all different methods.
    this works fine until i try to select 2 sub projects at the same time. i am getting the standard currentset dosnt work cause its a set.
    is there i way i can check if its a multiple select or not and handle it a different way

    Hi,
    Check the following link about Multi Select Calculations written by Mosha.
    http://sqlblog.com/blogs/mosha/archive/2007/01/13/multiselect-friendly-mdx-for-calculations-looking-at-current-coordinate.aspx
    Best regards...
    Chandima Lakmal Fonseka

  • HT1918 How can i change my credit card details on my itunes?

    How can i change my credit card detail on Itunes??????????????????????????/

    On your computer's iTunes you should be able to log into your account via the Store > View My Account menu option, and then on your account's summary screen click the 'Edit' button next to the Payment Information line

  • How can I switch between multiple windows of the same application (e.g. Safari) over several desktops ?

    Hi All,
    I have one application, for example safari, open and running with multiple windows (with or without tabs) spread over several desktops.
    How can I switch between the windows only via keyboard? CMD+> and CMD+< let me only swicht between windows open on the one desktop I am currently looking at.
    thanks for your replies,
    equi

    Barney,
    many thanks for your efforts and your time (preparing and posting the screenshot, answering to this question,...).
    Unfortunately, moving the focus to the next window only works with windows on the same desktop.
    btw, using a german keyboard layout and german language settings the shortcut is "cmd+<".
    I can switch with this shortcut between different windows of my Safari which reside on the same desktop, but I cannot swith between different safari windows distributed over several desktops.
    Thanks,
    equi    

  • I have an itunes account without credit card.How can I add a credit card to my account? Also, is there a way to buy apps without credit cards but via app store? Also, I want to download it directly to my iPad, can I do it even if i add credit card via pc

    I have an itunes account without credit card. How can I add a credit card to my account? Also, is there a way to buy apps without credit cards but via app store? Also, I want to download it directly to my iPad, can I do it even if i add credit card via pc?

    Changing Account Information
    http://support.apple.com/kb/HT1918
    Apps Store FAQ
    http://support.apple.com/kb/HT4461
    iTunes Store FAQs
    http://support.apple.com/kb/ht1689
    http://www.apple.com/support/ipad/applications/

  • How can i disable the credit card from that stolen acc and register to my new account

    Hello everywone i have a big problem.. Somewone stole my apple id and changed everything (email , secret question). In that account was my credit card registered. how can i disable the credit card from that stolen acc and register to my new account ?? thanks for help

    Is it an IMAP or POP account?
    For POP accounts, you can select remove from server under the advanced tab of the account.
    Apple support article with information on receiving a message more than once:
    Mail Problems

Maybe you are looking for

  • What's wrong with this AppleScript?

    tell application "Pages"   select tables of body text of front document           set table properties to {width:20.5} end tell I want to select all tables in the Pages document and set the column width to 20.5 cm... But I'm getting an error... Can't

  • Problem with java classes

    i have made some java files in java project but when i compile the files it gives me error " error 300 : classes are not found " <<should the classes be created automatically or i have to create them>> i will post more info if necessary

  • Compressor 1.2.1 with QT 7.0.3 - Issues?  Help!

    I am trying to export from FCP 4.5 HD (OS 10.3.9) using Compressor 1.2.1 and EVERY TIME when Compressor is through and I play the compressed clip the audio starts out fine but over the course of the clip (25 Minutes or so) the audio gets behind. I ha

  • Bug in org.xml.sax???

    Hi, we're doing this big project for school and it seems as if there is a bug in the sax-pargers (org.xml.sax). I was writing tests and i wanted to fail a test so, i made shure there was a parse error in a certain xml-file. when i ran the test, the p

  • Cd stuck during OS mavericks upgrade

    Ive been trying to upgrade to mavericks from snow leopard on my MacBook Pro. It says download failed because my hd is damaged. I cannot get past this screen - everytime I restart my computer it comes back to this.  I want to use my installation cd to