How can i switch my att wifi with time capsule

how can i switch my att wifi with time capsule

Sorry I have no idea what you mean.. switch off, switch on, swap over.
Bridge the TC and use same ssid (wireless name), security but different channels..
Or just turn it off.
Please write a question that is a sentence and has sense.

Similar Messages

  • How can i extend a wireless network with time capsule

    How can i extend an existing wifi verizon wireless network with time capsule? the router is connected on the bottom floor. want to boost the signal to a home office on the top floor, four flights up. connect time capsule via ethernet cable to iMac on 4th floor? Do I have to start a second wifi network or can I set it to just boost the one I have? thank you

    How can i extend an existing wifi verizon wireless network with time capsule?
    It all depends on what you mean by "extend".
    If you plan to "extend" by connecting the Time Capsule to the Verizon router using a wired Ethernet cable, this can be accomplished.
    If you were hoping to connect the Time Capsule to the Verizon router using wireless only, unfortunately the Time Capsule and Verizon products are not compatible for that purpose.
    Check with Verizon to see if they offer an "extender" or "repeater" that could be located very close to the Time Capsule.
    This would provide both more wireless coverage and also allow you to connect the Time Capsule using an Ethernet cable from the "extender" or "repeater".

  • I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

    I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

    On your Mac.......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click on the Disks tab at the top of the window
    Click Erase Disk
    On the next window that appears, select the Quick Erase option, then click Erase
    The operation will only take a few minutes.
    Now you are ready to start new backups of both Macs.  Back up one Mac first, then back up the other.  Do not try to back up both Macs as the same time.

  • I lost everything in my iphoto library how can i restore the entire library with time machine?

    i lost everything in my iphoto library how can i restore the entire library with time machine? help!!!!

    Open the folder that contained the library and then enter Time Machine.  Select the most recent date that contains the library and then restore.

  • I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

  • How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

    How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?  I have an ISP provided wireless Router that has to remain as the base station.  I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

    One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

  • I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion.  how can I restore the data from the time capsule to my new Mac?

    I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion.  how can I restore the data from the time capsule to my new Mac?

    In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
    iTunes does prompt when it is going to erase a device, and the message is clear.
    She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
    Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
    I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
    She marked this as a solution, so it worked for her.

  • How can I extract the info from my Time Capsule?

    How can I extract the info from my Time Capsule?

    What info would that be??
    If you mean how to recover TM back to a computer.. see Pondini Q14-17
    http://pondini.org/TM/FAQ.html
    If that isn't it .. we do not know what.. "the info" you are talking about.

  • How can i change the data from one Time Capsule to another?

    How can i change the data from one Time Capsule to another?

    Do you mean copy it?  If so, see #18 in Time Machine - Frequently Asked Questions  You'll need section 2 there.
    If you mean something else, please clarify.

  • Can't see other backup discs with Time Capsule Mavericks

    I've got two Macs and a Time Machine. I can access the 'data' drive on the time capsule on each machine and can back up (both are backing up to 'data'). However if I try to browse all backup discs the window on both machines shows nothing at all.
    It's not a problem at the moment but if I needed to access the data of one computer from another, how do I do this? Is there something I should be fixing now to do this? They are both backing up ok, so the data should be there.

    Do not look at the green box
    The steps in the pink box work perfectly on both Mountain Lion and Mavericks when I check here.
    Follow the steps in the pink box.
    List each step that you perform
    What happens after each step

  • How can I backup my mac on a Time Capsule (connected with ethernet), without any user logged on the mac?

    Time Machine by default does not run when no user is logged in, there's some way to let backups run without any user logged on the mac?
    I need to backup 3 iMac connected through ethernet network to a Time Capsule.
    Some hint?

    If you use eithernet for your main connection then just plug the TC bridged into the network.
    If you use wireless for your internet connection then you can use the TC isolated from the network by ethernet.. but this is really only convenient on a desktop Mac.
    The instructions I put in this thread with screenshots.. see near the bottom.
    https://discussions.apple.com/thread/4817218?tstart=30
    It is a bit tricky so if you have questions ask back here.
    Just to say a USB for firewire external drive is faster and more reliable than a TC.. cheaper to buy as well.. although since you already have the TC that is not a concern.. but you can ebay the TC and buy a bigger and better external drive with the proceeds.

  • Help! How can I restore iTunes/iPhoto library from Time Capsule to new Mac?

    Sorry to trouble you, because it looks like this should be an easy thing, but I can't find an answer anywhere...
    I've got an 2008 MacBook Pro that suddenly began to suffer start up problems. Sometimes it boots to a black/grey screen and sometimes the screen/mouse freezes after only a few minutes of use.
    I've borrowed my brother's Mac until I can find out how to get mine repaired, so I'd like to copy over my iTunes and iPhoto stuff from a Time Capsule (where I'm hoping it hasn't been damaged) to his Mac. I only want to copy the iTunes and iPhoto stuff, without filling up his computer with all my other junk.
    Is there an easy way to do this? Thanks!

    Hi ...
    I've found a solution to my problem.
    Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
    My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
    I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
    Hope this helps.
    BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
    (Thanks goes to Pondini!)

  • How can i exclude my macbook backup on time capsule from other imac connected to same time capsule?

    we have several mac connected to same time capsule, how can i exclude one macbook backup from all the others mac accessing same time capsule?
    thanks

    Not exactly clear what you mean.. the TC will keep each Mac backup in its own sparsebundle.. it does this automagically.. The backups are not mixed.. all are kept separate.
    Or is this a security question.. you don't want people looking at the contents of the backup?
    You can increase the security of the TC.. but it is too late.. you should have done it when first installed. If you go to the setup you can change security (Secure Shared Disks) by selecting with Accounts.. the problem is you will lose access to all the existing backups. You really need to do a clean start.. create accounts for all the users and start again.
    Also note security is not a big feature here.. anybody with physical access to the TC can press the reset for 1sec and get access. It is a home device not a business device.

  • Best configuration to extend wifi with Time Capsule & Airport Express

    In my house I have a Fritzbox wifi router on the ground floor as my primary internet access.  I have an ethernet cable going to the 3rd floor study where the Fritzbox signal is relatively weak.  I purchased a Time Capsule as a backup device, but also wanted to extend the Fritzbox wifi network by plugging the ethernet cable in to the TC.  I was not successful in extending the network, so I had to create a new network.  When moving from downstairs to upstairs, my iphone keeps the connection to the (now weak) wifi network and I have to manually change to the (stronger) TC wifi network.
    Additionally, I used to be able to successfully extend the downstairs wifi using my Airport Express (and also managed to have my speakers plugged into this for wireless usage), but do not want to additionally complicate my set-up.
    So, what is the best way to connect the following equipment, ideally with the same network name, to ensure I always use the strongrst signal automatically:
    Third floor:          iMac,    Macbook,   Time Capsule,  Airport Express
              Ethernet cable from ground floor to 3rd floor
    Ground floor:     Fritzbox wifi connected to internet

    You must configure the Bridge Mode setting as the very last step before you Update the settings, otherwise the setting will change automatically. 
    In other words, you can change the setting to Bridge Mode, but if you make any other changes before you click Update, the Bridge Mode setting will not take effect.
    Or, if you see any error messages about DHCP conflicts or Double NAT....the AirPort is not in Bridge Mode...even though you might think it is. Check the settings again.
    will I still be able to set up an additional 5GHz network in parallel?
    Yes

  • How to turn-off automatically the wifi of time capsule

    Hello I have a new Time Capsule for fews weeks and I would like to turn off the wifi automatically during nigth.Is it possible ? How can I do that ?
    Thanks for yourhelp

    mserfaty wrote:
    I heard about potential wifi danger. Are you sure that when there is no client, the wifi stops difusing the signal ?
    You are reading the normal sort of rubbish that flat earthers produce against every new technology.
    I don't want to start a new thread about this.. but wifi produces so little signal when it is transmitting that cosmic rays will far exceed your exposure.. so are you going to go and live in a cave??
    The signal from the TC when there is no actual data transfer is merely polling. It will do you no harm.. nor will full 100% transmission.. except in the flat earthers view.

Maybe you are looking for

  • Strange issue during Clustware installation !!

    Hello everyone !! I have come across a very strange problem.. During CRS installation when i come to Cluster configuration it does not show me any public/private/virtual interface name , on top of it ..Add/delete/edit buttons are disabled.. What coul

  • Error in opening all forms/ grids

    Hi While trying to open any form/ grid in HFM, I face an errro which does not allow this grid to open. The forms show an error in POVs which were set -- I cannot select the member list to reset the POVs. THe error in selecting a member for POV on a f

  • Load image into Photo Album

    I'm new to Oracle. Can I load image into database by using Photo Album by no writing any code? And how? If not,how to load image into database?

  • RH 9 / FM 10 linked files crashing

    FM 10   Files saved to network location RH 9   Linked to three FM10 files plus TOC. Plus a Preface written in RH and not linked   Webhelp default output   Proj saved to C:\Projects\Imp_ByRef_from_Ydrv\!SSL!\WebHelp\index.htm PC   System 7   Plenty of

  • Address Book Opens Automatically and will not close (even with Force Quit)

    The address book automatically opens at times and I cannot close it. Even with a force quit, I cannot close it. It takes up over 80% of CPU cycles when it opens automatically. Any thoughts or suggestions? Thanks Robby