How can I switch my output audio from stereo to mono?

Hey,
I can only hear out of one ear and I would like to be able to listen to the other half of my music on my headphones, how can I switch my audio from stereo to mono?
Thanks!
Zach

http://www.radioshack.com/product/index.jsp?productId=2102690
http://www.scansound.com/index.php/stereo-to-mono-adapter.html
Or you could buy a mono/one ear headset. http://www.beso.com/2699431644/detail

Similar Messages

How can I convert my iTunes media from stereo to mono?

Just a sound preference I would like to have. Lets keep it simple. (iTunes 10.6.1)

http://www.radioshack.com/product/index.jsp?productId=2102690
http://www.scansound.com/index.php/stereo-to-mono-adapter.html
Or you could buy a mono/one ear headset. http://www.beso.com/2699431644/detail

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

How can I reinsert the deleted audio from clips in my sequence?

How can I reinsert the deleted audio from clips in my sequence?

I can tell you a work around to get you going in the meantime, just may be time consuming if you have a lot of clips in the timeline.
double click a clip missing audio
press the go to in point and copy the timecode to notepad
press the go to end point and copy timecode
right click clip, and reveal in project
double click the original in project
paste in timecode and set in & out points again
drag audio
As I said not the quickest way, but it works, and won't actually take as long as you'd think, 30 secs or so per clip, i just hope you don't have over 100 clips without audio
Troy

HT5312 HOW CAN I SWITCH TO IRELAND STORE FROM U.S STORE? plus i forgot my security questions?how can i retrieve them?

HOW CAN I SWITCH TO IRELAND STORE FROM U.S STORE? plus i forgot my security questions?how can i retrieve them?
my temporary pin is 2791

The Best Alternatives for Security Questions and Rescue Mail
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contact Apple support.
    c. Rescue email address and how to reset Apple ID security questions.
Change iTunes Store Country on an iDevice
1. Tap Settings;
2. Tap iTunes & App Stores;
3. Tap View Apple ID;
4. Enter your user name and password;
5. Tap Country/Region;
6. Tap Change Country/Region;
7. Select the region where you will be located;
8. Tap Done.
Also, see How to Change Your iTunes Store Account Location | eHow.com.

How can I Import 2 channel audio from a Sony PMW300 camera?

How can I Import 2 channel audio from a Sony PMW300 camera?

Terry Woolf
Thanks for the reply.
The link to your prior thread is
Audio
I suspect that the issue of no audio for your .mp4 file goes to your conversion method MXF to .mp4.
Please excuse if I am saying what you already know. When you import your video into Premiere Elements (in your case 12 Mac), a project
preset is established, either by you manually or the project automatically. That project preset contains a description of the project settings
for audio as well as video. Unless you select one of the project presets which are described for use with 5.1 channel, your audio in video audio
imports into a stereo project. It is in the export area that you will find your opportunity to customize (if necessary) the settings for audio.
In the project, if applicable to your situation, you can duplicate an audio channel (See Fill Left or Fill Right under fx Effects/Audio Effects).
Please let me ask this to make sure of the details.
If you import your .mp4 with 2 channel audio (derived from your .mxf convert and dragged to Video Track 1/Audio Track 1) and cannot hear the sound....
a. do you see any evidence for an audio file in the Timeline Audio track 1?
b. if you do, how many wave forms do you see, one or two?
c. if you have the audio meters opened while you are playing back the Timeline content in Edit area, do you see 1 or 2 channels and is
there activity in both.
d. when you import the file into Project Assets, do you observe any conforming activity going on in progress bar in the lower right cover of the workspace...if
so, do you wait for it to go to completion before continuing on?
We could also try deleting the conformed audio in the Media Cache Files Folder to force the program to re-conform the audio. See Edit Menu/Preferences/Scratch Disks should show you the location of the Media Cache Files Folder whose contents you will be deleting.
Please review and consider, and then let me know if I targeted your question. If not, please do not hesitate to let me know, and I will rethink my reply based
on your response.
Thank you.
ATR

HT204053 How can I switch my iTunes account from US store to Nigeria store?

How can I switch my iTunes account from US store to Nigeria store?

If you are asking because you are getting an 'account not in this country' error message then on an iPad, iPhone or iPod Touch try going to the bottom of the Featured tab in the App Store app on the device and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section on that screen and select Nigeria.
If you need to update your address on your account from the US to Nigeria then on your computer's iTunes you should be able to do so by signing into your account via the Store > View Account menu option and updating your address, or on an iOS device you can do it by tapping on your id at the bottom of the Featured tab in the App Store similar to above.

How can I switch back and forth from Classic to Tiger

How can I switch back and forth from OS9.2.2 to Tiger without restarting? I want Classic as my startup system.

I think that the number of clicks to open a file is a rather shortsighted way to compare two operating systems.<<</div>
Well excuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuse ME!
I happen to think it's a pain to click twice on files when I'm used to clicking just once.
But Tiger is a nice operating system. I enjoy that it has much more capabilities than the OS9. I mean, Tiger keeps up with the advancing internet. My beef is really against OS9. I can open OS9 in Tiger but not Tiger in OS9.

HELP! How can I switch back and forth from LT to FCE to sync sound?

I'm using LT 1.2.1 and FCE 3.0. I haven't used it for 2 or 3 years, but people in this forum have been amazing at helping me get an old project working again.
Here's my latest question. I swore back then there was a way to move back and forth between LT and FCP so I wouldn't have to render my LT files each time I wanted to drop it into FCP.
Here's what I'm doing:
I've created an entire "movie" in LT that now needs to be fine-tuned to be sync'd up with a professional voiceover, which is why I'm using FCP. The only way I can figure out how to make sure the LT file is going to be sync'd with the audio is to render the movie in LT, import it into FCE, see if the audio works with it, if not, I go back to LT, move things around, then re-render, import into FCE, and hope it all sync's.
I think there was an easier way to go back and forth between the two.
Along the same lines, is there a way to get the audio from FCE (or some sort of a representation) into LT? The LT file must be adapted to the audio, and if I could "see" the audio in LT, it would be infinitely easier.
Thanks!
Bob

LiveType does not support any kind of audio, Bob.
Go through your movie in the FC Timeline and set markers at the relevant cue points by pressing M.
Pressing M a second time whilst sitting on the marker, will open a dialog where you can type a suitable description in the name field. Keep the description short -it might help to take notes too.
Export a copy of the movie (including markers) and bring it into LiveType with File > Place background Movie. The markers will show up at the top of the LT timeline, with their descriptions.
Delete the background from LiveType when you have everything lined up. Save your LT project file and import it into FCE. You can use the project file exactly like a video clip.
If you need to go back to LiveType for changes, right click the LT file in FCE's Timeline. Choose "Open in Editor". This will open the project in LT. Make changes, save the file and it will update in FCE.
Message was edited by: Nick Holmes

How can I switch my iTunes catalog from my desktop pc to my laptop?

I am retiring my desktop computer that has my iTunes music catalog. This is the pc that I sync my iPhone, iPod, and iPad.How can I delete this from the desktop computer and transfer it all on my laptop or possibly a different desktop? Is it possible to do this without losing what you have in your library, including purchased items and cds you've downloaded? Thank you.

Copy the entire iTunes folder from the old computer to the new one.
You can do this across a network, but it may be better to use an external drive, particularly if you don't already have a backup strategy. Get yourself a portable USB powered drive big enough for your iTunes library, your other personal documents and data, and room for growth. Backup your library with this User Tip. Use the same technique to "restore" the backup to the new computer and then keep the backup up to date in future.
Deauthorise the old computer once you are certain that you no longer need to access protected content from it.
tt2

How can I switch a data plan from one line to another?

I have 5 lines on my account in a Nationwide Family Plan. I have a question about these two lines:
A: Smartphone, 2GB Data
B: Smartphone, 4GB Data Promo
Line A has been using about 3GB every month due to no wifi access, while Line B uses less than 1.5 GB a month as they work from home.
I can't see upping Line A's data as the next available tier is the 5GB for $50/month, and there is literally no way I would ever consider a Share Everything plan, they are just too expensive for my needs (i have unlimited on my line and use 5-9GB a month)
Is there any way I can swap the data between the two phone numbers? Or just switch the phone numbers between the two phones? I can always swap the SIM's myself (they are 4G devices).
Thank you for any input you may have!

Your suggestion is to trade phone numbers. For example your example is Mom has XXX-555-1111 and Dad has XXX-555-2222. They would have change to Mom with the 2222 number and Dad with the 1111 number. All their contacts would have to call a new number to get that person.
For the OP to keep the numbers associated with the original person (Mom-1111 & Dad-2222) it isn't possible to switch phone numbers associated with a specific line's contract and features.

How can I use the output value from SIMPLE PID to write something to the serial port?

I am working on my Senior Design Project that requires the use of incoming compressed air, propotional valves, continuous servo motors, and a serial servo motor microcontroller. I have figured out how to send byte sequences to the microcontroller through LabVIEW using the VISA serial write function. The motors are attached to the valves to control the flow rate. I have created my own simple feedback system using a bunch of case structures but I realized that I am basically trying to recreate the wheel (I basically was writing my own PID VI). I have an older version of LabVIEW (7.0 Express) and theres no way to upgrade or buy the PID toolkit, so I am stuck using the Simple PID VI. Also, the only way the motor works is sending an array of bytes to tell it to turn on/off, direction, and speed. Is there any way I can use the Simple PID VI in conjunction with the VISA SERIAL write function, or is there any other way I can communicate with the serial port using this pid vi? Any information would be appreciated.

Hi gpatel,
you know how to communicate to serial port, but you don't know how to send a value from SimplePID to serial port???
You know how to communicate, but then you don't know how to communicate???
You should explain this in more detail...
Edit:
From you first post you know what values your motor driver is expecting. You know which values the PID.vi is providing. Now all you need is a formula to reshape the values from PID to the motor. It's up to you to make such a formula. Unless you provide any details we cannot give more precise answers...
Message Edited by GerdW on 02-28-2010 08:35 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can I switch my Apple Account from UK store to Canada Store?

Each time I need to update something on my iPad, a dialogue appears saying I need to switch to Canadian store, I do I get this done please?

Change the App Store country -
Open the App Store app, go to the Featured pane, swipe to the bottom, tap your Apple ID and sign out. Tap again and sign back in. The App Store will automatically change to the store from which your account is authorized to make purchases.

How do I switch channels in iTunes from Stereo to Surround Sound?

Hello!
I usually play on my apple tv and somtimes my Mac Mini with HDMI out connected to bose 5.1 using the headphone jack. When opening my videos it would automatically go to stereo and I could right click and switch between tracks to stereo. Now, I opened a movie I was able to switch back and forth and its GONE! Its grayed out and I can't even click it! I am so confused about a week ago I could switch within iTunes and not any more! Can someone help?
<center>
</center>

Here's an article about synching (moving your music) with a new computer: http://support.apple.com/kb/HT4527

How can I toggle my iTunes audio output from my TV speakers to my Mac speakers

I've just recently set up my Apple TV.
This morning, I tried playing a song on my Mac with the intent of hearing it from my Mac speakers. However, the output came out of my TV speakers. How can I choose where the audio output is coming from?

From your Old Computer... Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
An Added Bonus is that you will then have a Backup of iTunes...
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

How can I switch my output audio from stereo to mono?

Similar Messages

Maybe you are looking for