How can i sync different materials into my iPod and iPad on the same computer?

i don't want iTunes to sync all the apps from my iPod to my iPad, what can i do?

When the devices are attached to your computer's iTunes just select the apps that you want to have on each device on their apps tab. I manually manage the content on my iPad, iPhone, and iPod Touch so only the content that I select gets installed onto each device.
You can also set up separate playlists for the two devices for music, or create separate iTunes libraries : http://support.apple.com/kb/HT1495

Similar Messages

  • How can I sync my Itunes between my iphone and ipad with the cloud?

    How can I sync my Iphone 4 and my Ipad 2 using the Cloud?

    Make sure they are both using iOS 5 or higher, then go to Settings>iCloud, sign in with your Apple ID to create the account and turn on the data you want to sync with iCloud.

  • HT201269 Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

    Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

    - The iTunes backup that iTunes makes included photos in the camera roll. If yo go to iTunes>Preferences>Devices what is the date of the backup? Is it when the photos were on the iPod? You have to restore from that backup.
    - What may have happened is that you backup the iPod after you restored the iPod but before restoring from backup. iTunes only keeps one backup and overwrites the previous backup with the changes.

  • I have an iCloud email address on my iMac. How can I create an icloud email address for my wife on the same computer?

    I have an iCloud email address on my iMac. How can I create an icloud email address for my wife on the same computer?

    If all you want is an additional email address you can create up to three 'email aliases'  - these are additional addresses (not accounts) which deliver into the same inbox as the main account.
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account, move it to another account, or reactivate it if you delete it.
    More information on aliases here:
    http://help.apple.com/icloud/#mm6b1a490a
    If you want to keep her email separate from yours she will need to create a new Apple ID, and use it to create a new iCloud account either on a separate computer or on a separate User Account on your Mac.

  • How do you manage an Ipod and Iphone on the same computer

    Hi how do you manage an Ipod and Iphone on the same computer?
    I have my ihpone but for running and cycling i also have my ipod nano, every time i connect one or the other it wipes songs that i want to keep?

    create a playlist for each device and sync only that playlist.
    i'm syncing four mobile devices to iTunes and each has its own playlist. works like a charm.
    JGG

  • HT1495 Can i have facetime and imessage activated on both my ipod and ipad on the same apple iD?

    Can i have facetime and imessage activated on both my ipod and ipad on the same apple iD?

    I have facetime and imessage activated on my ipod. When i try to activate it on my ipad it give me the message that "could not sign in. Please check network connection and try again. " everything else that requires internet works .. What do i need to do?

  • How can you sync safari bookmarks between iphone 5 and ipad mini retina? IOS 7.1.2

    The syncing works between my iMac and iPhone on one hand and between iMac and iPad on the other. I'm using IOS 7.1.2. I made sure iCloud is on on IOS devices, same iCloud account, made sure there is no problem with the WiFi...I appreciate any help I can get. thanx

    Finally I got a solution from an Apple guy today. First we did the following steps on an iPad and then on iPhone.
    Basically, it comes down to this:
    general/restore/ erase all content and settings
    set up the iPhone/iPad as a new device
    type your iCloud account info
    once everything is up and running, wait for a while and first check on contacts, calendars, notes if it's syncing with the iCloud, then open safari and look for the other device. In my case it worked and iPad finally detected iPhone and I could see the safari tabs from the iPhone on the iPad.
    But then, Iphone still couldn't detect the iPad, so the guy said the original problem was probably in iPhone. And so we did the whole thing again on iPhone and then I finally had my tabs from all devices visible on every device.
    Thanks for your help anyway.

  • How can I transfer a local mailbox to another user account on the same computer?

    I have two user accounts on the same computer. I actually never really wanted two accounts, but a second one was generated when I chose to use the Migration Assistant to transfer my account from a previous computer to my current one, and I never did anything to delete the second one. Anyway, I have been using Mac Mail to view my work email messages from a Microsoft Exchange server. Awhile back, I was running out of space on my mail server, and decided to download a bunch of my email messages to local mailboxes in order to free up space.
    Recently (for reasons that are not terribly relevant) I have decided to switch between the two user accounts on the computer. I have transfered all of my documents, apps, etc. to the new account. However, I haven't been able to find a way to transfer all the email that is in those local mailboxes, so that they are viewable/usable in the new account. Could somebody suggest the best way for me to do this? I am no longer going to use the old account, so the two do not have to be synced. I just want the mailboxes to be available for the new user account (with the same organizational structure).
    I am currently running Mavericks (just upgraded last week).
    Thanks,
    JEG

    A quick update....
    I copied the folder in ~Library/Mail/V2/Mailboxes that contains all of my local mailboxes over to the same location in the new account. When I go into mail, the entire file structure is there, however it does not let me view (or search) any of the messages. The messages can be accessed through the Finder, though.
    I tried to "Rebuild" the local mailboxes, but it didn't seem to do anything. Any advice would be appreciated.
    JEG

  • Can I sync an audiobook between my iPod and iPad?

    I am trying to sync an audiobook I have on both my iPod and iPad.  Can this be done? 

    I purchased the audiobook from audio.com. The audiobook is on my computer in iTunes so I was able to put the audiobook on both my iPod and iPad. What I am trying to do is listen to the book from either device and be able to pick up where I left off...for example, chapter 12. Is there a way that can happen perhaps by having both devices connected to the computer/ iTunes at the same time?  I can connect both devices and iTunes recognizes both devices.  I was hoping that it would sync both devices to last page read.  Is that possible?  As for now I manually fast forwarded each device to the same spot where I left off.  Hope this makes sense.  Giles's what I want is for both devices to know where the other left off.  It works like that with the kindle and iPod.  Thanks for any information.  I wast as detailed in my first post.

  • How can I display assignment-level Work in hours and days in the same view?

    I have a view based on Task Usage and I shows the Work figure for each resource assigned to a task.  My Options settings are to display Work in hours.  Want I'd like to do is have a custom field to calculate the equivalent number of days for each
    assignment-level work value.  Our hours per day are 7.4 so the calculated field should be [Work]/7.4.  eg.
    Task Name >  Work         >  Work-days (Calc'd Field)
    Task 1
        Fred        >  7.4 hrs     >  1 days
     I tried creating a Resource custom field to do this but what displays is the value of the Task-level Work and this same value is repeated on every assignment row.  MSP is not using the Work value of the assignment. 
    Is there a way to acheive this view?
    Thanks
    John

    You're welcome John.
    You could have a calculated task custom field which could divid the work in hours by 7.4 hours, but even like this you couldn't add it to a usage view and it would be only at task level, not assignment. Maybe a VBA macro could switch automatically the option
    but I'm not sure.
    If a reply above helped you, please mark it as an answer so other users with a similar concern can refer to it.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Can I have an ipod and shuffle on the same computer?

    I currently have a ipod 6GB on a laptop. We just purchased the ipod shuffle can I use it on this same computer? Do I need to change any software? Thanks

    These links should help:
    Natalie Beresford: Multiple iPods/iTunes Installations
    How to use multiple iPods with one computer
    How to share music between different accounts on a single computer

  • TS3899 hi - why can't i delete emails once from iphone and ipad at the same time?

    When I delete emails from the iphone they still appear in the ipad. Why? How can I delete from both devices at the same time?

    You can and it should be automatic depending on your refresh rate.  If your phone and iPad refresh every hour, or only on request, then the iPad will not show the change until you refresh the email account.
    Next time you delete emails, try it....Refresh the screen on the iPad.
    This only works if iPad has internet connection.

  • Can you sync and iPhone and iPad to the same computer with different Apple IDs?

    I synced my ipad2 to a computer my husband synced his iPhone to.  It now has his info. Is there a way to sync both devices with different IDs?

    You can if you use different user accounts on the computer so you have your own iTunes libraries. It will take some work. Read this.
    http://ask.metafilter.com/179780/Multiple-IOS-devices-two-users-one-computer

  • How can I sync my downloaded cds to iphone and ipad?

    I used to be able to transfer all my music from computer to ipad, but much of it is gone, mostly the downloaded cds, but also much of my purchased tunes. I could not get it to iphone either now. I have all the proper things checked, but it does not work

    I've done that a hundred times and it used to bring all my music over, but it does not do it anymore, only a few come over. If the newer was in the directions I would have found it that way

  • How can I transfer playlists from Windows 7 to Windows 8 on the same computer?

    Windows 7 and a new Windows 8 OS are each on a seperate SSD, and all mp3 and m4a files are on a third.
    Can I transfer/sync playlists from iTunes 11 on Windows 7 to iTunes 11 on Windows 8?  If so, can one OS update the others changes?

    When I dual boot my pc, I always share hard drive of previous version. Once you do that, it becomes accessible for newer version, which basically making them two computers. Then use article "how to move your library to new computer". To be honest, I havent done that, but seems to be easy.

Maybe you are looking for

  • Unable to reach Adobe servers, Please check firewall settings and try again

    I have been a creative cloud customer since it started and I've never experienced such buggy software as the app manager. The customer experience is just shocking and I wish Adobe would just offer direct downloads for the software we need rather than

  • Variant configuration-- syntax error in creation of object dependencies

    In variant configuration when i try to create object dependency (tcode=cu01), after entering the dependency and also description when i enter the syntax in the source code it is giving error: error in syntax check for simple condition I have entered

  • The disp+work process of my portal server can't start

    Hi help me! the trace: trc file: "dev_disp", trc level: 1, release: "700" sysno      00 sid        EP7 systemid   560 (PC with Windows NT) relno      7000 patchlevel 0 patchno    146 intno      20050900 make:      multithreaded, Unicode, optimized pi

  • Using SCSI peripheral with PowerBook G4

    I have been using an Epson Expression 636 scanner with a G3Blue and White, connecting with a SCSI cable. Now I want to use the scanner with my PowerBook G4 and I don't know how to connect the SCSI output from the scanner to my G4 which has usb and fi

  • Duplicate DTP in Process chain

    Hi folks, I have 2 separate loads (infopackages) scheduled that load into infoobject via a DTP. I can't run these both before running the DTP as this may result in duplicate entries. Ideally, I would run the infopackage 1 followed by DTP and then inf