How can I take backup in External HardDrive and then reinstall new OS and then restore data from External Hard Drive

I have goot some issue with my Macbook i7, I am not able to start my Macboook its keep showing the Grey screen after login.
I have done something where I have successully taken the OS backup on External Hardrive which was saying computer will start automatically. After this I founded a Fresh new computer but may be that was running on External hard drive.
I am **** confuse what should I do next?
Anyhelp wold be great......

Delete the user account, then use the "Erase Free Space" option in the Erase tab of Disk Utility to write zeroes to the drive. Stick with the "Fastest" method (one pass of zeroes) unless you're hiding secrets from the NSA - anything more stringent is a waste of time.
Matt

Similar Messages

How do I restore data from recovered hard drive?

In a nutshell-
Hard drive failed. We had it replaced, and recovered data from old hard drive, put it on an external hard drive. Now we want to put that data onto the new hard drive.
Is it as simple as dragging it over?
We're missing most of the software that came with our computer when we first bought it. We can't find the software installation disk, but we do see application icons from the recovered data. We do have the Software disk from a Mac mini. Can we use this disk? It seems like there has to be a way to get the software we had before the crash without paying to have it done.
I thank you, in advance.

You cannot use the discs from a Mac Mini--you have to have the exact discs for your iBook G4. These discs are very machine specific.
That said, you can try bringing over the various applications from your external drive. The only potential problem is that because the old drive failed, there could be some software corruption.
If you can locate your original discs and install the software from them, that would be ideal. If you can't, you can get replacement discs from Apple for a fee.
As for the data, you should be able to just drag it over.
Good luck!

How do I restore data from my hard drive from time before time machine tried to back up on it

I used to have a WIndows PC, than I finally joined Apple Family and Iam pretty happy.
But today I tried to get some data from an old WD Passport Hard Drive and Time Machine immidately tried to backup itself on it.
Before I understood time machine startet to backup on my hard drive and everything I had on it before was gone.
What to do?
How can I get my data back?
Thanks

In order for Time Machine to back up to a HDD, it must be formatted to Mac OS Extended (Journaled) in Disk Utility. Formatting will erase all user data on that HDD. Time Machine will only delete TM data on a HDD that may have other data on it (non TM data).
If you formatted that WD HDD for use with Time Machine, all data that was on it is gone. If you put data on the WD HDD after formatting, it still should be there.
Ciao.

How can we take backup of all the RDL'S existing at Report server dynamically at one time

How can we take backup of all the RDL'S existing at Report server dynamically at one time ? I want to take backup of all the reports existing at the report server dynamically at one time only. currently I'm able to take backup of the reports folder wise
using VBScript. and I have to pass the folder names again and again. I want this to be happened for all the reports of all the folders at single shot only using VBScript.

Hi DineshRemash,
Based on my research, we can store the following VB Script to a text file, then modify the file name extension from .txt to .rss.
Dim rootPath As String = "C:\Reports"
Sub Main()
Dim items As CatalogItem() = _
rs.ListChildren("/", true)
For Each item As CatalogItem in items
If item.Type = ItemTypeEnum.Folder Then
CreateDirectory(item.Path)
Else If item.Type = ItemTypeEnum.Report Then
SaveReport(item.Path)
End If
Next
End Sub
Sub CreateDirectory(path As String)
path = GetLocalPath(path)
System.IO.Directory.CreateDirectory(path)
End Sub
Sub SaveReport(reportName As String)
Dim reportDefinition As Byte()
Dim document As New System.Xml.XmlDocument()
reportDefinition = rs.GetReportDefinition(reportName)
Dim stream As New MemoryStream(reportDefinition)
document.Load(stream)
document.Save(GetLocalPath(reportName) + ".rdl")
End Sub
Function GetLocalPath(rsPath As String) As String
Return rootPath + rsPath.Replace("/", "\")
End Function
Then navigate to the folder contains the script, we can directly run the below command from the run menu:
rs -s
http://aa/ ReportServer -i download.rss
We can modify the rootpath to point at whaterver fold you’d like to download the RDL files.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How can i restore info from my hard drive to my new mac

I have an "old" black macbook, that I have backed up on an external hard drive using time machine. I recently got a new (aluminum) macbook and i want to transfer my data from my hard drive to my new computer (itunes library, photos, etc...). I do NOT have ilife or iwork on my new computer, but i have it on my old macbook which (in theory) should be backed up on my external HD. Is it possible to transfer applications like that to my new computer if I "disable" it from my old computer? I also just got a new iphone 5 and would like to be able to sync it to my new computer but my itunes library is empty (until i take stuff from my hard drive and put it on my new computer). Obviously my old macbook will not support the software needed to hook up my new iphone to itunes, but my new computer will. So I beg the answer to my question...how do i get my stuff from one computer to the new one and can i transfer applications such at iphoto, pages, (ilife, iwork)...legally by disabling from my old computer?????
PLEASE HELP!

Have a read here How do I set up a new Mac from an old one, its backups, or a PC?
Stefan

The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

Remove the drive and put it in an external enclosure. Backup the drive completely. Repartition and format the drive. Replace the drive into the computer. Take the computer in for the logicboard replacement.

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

HT201250 I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

ehphotograph wrote:
Can I restore docs from my hard drive if they were backed up using time machine?
Yes.
And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.
Also yes.
Directly-connected external drives (ie, USB, FireWire, Thunderbolt) are not backed-up by default. You must remove them from the exclusion list in Time Machine Preferences > Options to get them backed-up. (Network drives cannot be backed-up.)
And they must be formatted for a Mac -- any variation of Mac OS Extended.
If the drive is connected, you can browse or restore normally -- just go to the folder or document in question and Enter Time Machine.
If the drive is not connected, it's a bit different. See #E3 of Time Machine - Troubleshooting.
Message was edited by: Pondini

How to recover data from bad hard drive

Once a hard drive goes bad (cannot get into the computer), is there any hope of recovering any data from it? If so, how?

Do you mean the hard drive is mechanically broken for sure? It's not a data corruption issue that is causing a problem with starting up the Mac, but maybe not be a bad mechanism?
If the drive is definitely broken, there are businesses that specialize in recovering data from bad hard drives. For example
http://www.drivesaversdatarecovery.com/ (I always saw their booth at MacWorld Expos...)
The cost of such services is usually high.
cannot get into the computer
So that probably means the hard drive in question is the internal drive? If you don't know for sure that the hard drive is physically broken, you can try starting up using your Mac OS X installation disc. Insert disc in optical drive and start up with the C key held down. When you get to Installer's screen, go up to the menu bar and run Disk Utility from the Utilities menu. Does the internal drive appear in the Disk Utility sidebar?
Alternately, if you have another Mac (that has FireWire), you can try starting the Mac with the problem in FireWire Target Disk Mode,
http://support.apple.com/kb/HT1661
Connect the "target" Mac to the other Mac (running normally) using a FireWire cable. Run Disk Utility on that Mac. Does the hard drive of the Mac in FireWire Target Disk Mode appear in the sidebar?
If you can get the internal drive to appear in Disk Utility, you may be able to run Repair Disk on the First Aid tab. There are also third-party utilities, such as TechTool Pro (Micromat), Drive Genius (Prosoft), and Disk Warrior (Alsoft), that may be able to fix (or at least recover data from) the hard drive.

How can I get rid of windows 8.1 in my new lenovo and get windows 7 put in?

How can I get rid of Windows 8.1 on my new Lenovo laptop and install Windows 7?

Hi,
I'll assume your laptop was upgraded from Windows 7 to Windows 8.1
1. Start by copying all your personal folders (Documents, Pictures, Music, Videos, Favourites, local databases,
hosts files, etc) into an external disk, DVD, tape, whatever.
2. If I were you, I wouldn't use Windows 8.1 backup tool, I'm not sure Windows 7 Restore applet will be able
to read a Windows 8.1 backup.
3. Check that you have all the necessary licenses, CDs and executables to reinstall your former Windows 7
applications, components, browsers, plugins, Java, .NET Frameworks, etc. Be aware that some applications require
to keep same hostname and/or same IP and/or or same local username (or all of them) as they were on the original
Windows 7 machine.
4. Check that you have your Windows 7 CD and license handy.
5. Do you have a Windows 7 image backup of your laptop (prior to the Windows 8 upgrade)?
5.a Yes? Then restore that image and restore your personal folders on top. You might need to
install or reinstall some of the applications I mentioned on #3
5.b No? You'll have to format your laptop, install Windows 7 from scratch, create your local
user with administrative rights, install SP1, install necessary updates, reinstall all your
applications and finally restore your personal folders.
Sebastian Sajaroff Senior DBA Pharmacies Jean Coutu

Hard drive replaced on imac how to restore data from external hard drive

Hard drive crashed, replaced by authorized dealer. Need to transfer all data from external hard drive to repaired computer.

http://web.me.com/pondini/Time_Machine/14.html
See especially C.

How to recover data from a hard drive with bad blocks?

An external hard drive, 4TB Iomega...connected via eSATA cable...had a power outage and the drive won't be read by OSX now. (Yes, it was on a surge protector and no I did not have a backup. I was actually preparing for the process of creating a backup when the power went out!) Anyway, I have tried using Data Rescue 3 and DiskDrill to try and recover data from the drive. I can recover the first 1/3 of the drive, but it ejects when either app tries to access the bad block. Can anyone tell me how/what software to use to recover the data? I know there are programs that will avoid the bad block but I've only found them for Windows. Are there any that will do such a thing in Lion? Any help will be appreciated...and no, I can not afford a data recovery service. Trying to do this on my own.

Basics of File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

How to recover data from the hard drive?

I've always heard that data is never really gone from the hard drive even after you delete it. How do I recover that data? My problem is some photos (my honeymoon photos) have been deleted from my computer and they have also been deleted from the recycle bin. I sure would like to recover them.

First stop using your system, then get a copy of a program that will recover files like Data Rescue 3. If you have a time machine backup you may be able to restore them.

How can i take Backup for my WLC 5508

Plz help me to take backup for WLC 5508
Sent from Cisco Technical Support Android App

Check here:
http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_managing_ctrlr.html#wp1196069

How can I recover my data from my hard drive

About 2 weeks ago I was uploading pictures to my computer when it froze.
I turned it off by holding down the power key, and started it up again.
It hasn't gone past the apple screen and the spinning dial since.
I have tried all the troubleshooting myself safe boot, firewire everything you can find through these threads.
After failing with all of these methods I took it into the apple store and they said that it would not appear on there machine.
So I have removed my hard drive and put it into an external case and hooked it up via usb and replaced my hard drive in my macbook.
Now when I hook my old drive (with all my files on it) up to my macbook now the old drive shows up but it will not show any of my files.
IS THERE ANY WAY I CAN RETRIEVE MY FILES ASIDE FROM GOING THE ADVANCED DATA RECOVERY ROUTE AND SPENDING THOUSANDS OF DOLLARS?????

From your long tale of woe, I take you are not backing up your data. Bad idea that.
After everything you have done it sound like your disk is in need of some kind of data recovery
Before going to a service you might try Data Rescue, http://data-recovery-software-review.toptenreviews.com/mac-recovery-software/dat a-rescue-review.html first. While there are some free data recovery program available, remember you get what you pay for.
If that doesn't work then send it out to a service for recovery
Then you might want to start planning a backup solution for the future
Remeber lose of data is a certainty. The only question is when
Allan

How can I take backup in External HardDrive and then reinstall new OS and then restore data from External Hard Drive

Similar Messages

Maybe you are looking for