How can i take out the print out of invoices

i want to see the print preview of billing document and i want to take the  print out also
but i m unable to do this
so wat is the navigation to do this please suggest.
regards
subrat

Output of Invoice:
Billing document (Change Mode) : VF02 --> Enter (takes to main screen) --> on the top line Goto --> Header --> Output  --> maintain output type --> Enter --> back --> Enter printer (in most cases LOCL) --> Enter & SAVE.
Move out of billing document & revisit Billing Document in change mode(VF02) --> In the initial screen itself, on the top line o to Billing Document --> Output --> Screen / preview > Enter> a screen will pop-up on which printer name is mentioned --> Enter & you will get the preview of Invoice.
To Configure printer, take assistance from basis consultant.
Regards,
Rajesh Banka

Similar Messages

  • How can I take my iphone 5 out of recovery mode if I do not want to restore my phone and the power button is broken?

    How can I take my Iphone 5 out of recovery mode if I do not want to restore my phone and my power button is broken?

    Unfortunately, you will have to restore your iPhone...
    From http://support.apple.com/kb/HT1808 :
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup.

  • I have photos on my iphone 4 that i'm trying to transfer to iphoto.  The problem is when I plug the phone in, it only wants to transfer the new photos, not all.  How can I take all the photos off my phone and put them into iphoto?

    I have photos on my iphone 4 that i'm trying to transfer to iphoto.  The problem is when I plug the phone in, it only wants to transfer the new photos, not all.  How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto.  Thanks

    To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.

  • How can I take away the 1x1 transparent gif on my slideshows in muse?

    How can I take away the 1x1 transparent gif on my slideshows in muse?  It's showing up as a SEO error only on the pages that include slideshows. 

    To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.

  • How can you take off the volume limit?, How can you take off the volume limit?

    How can you take off the volume  limit on iPod touch ?

    Which "volume limit" do you mean?
    All iPods have a volume limit feature that you can set yourself and on your iPod, go into Settings/Music/Volume Limit. There, you can set the volume limit to maximum, which is the same as turning it off.
    However, if you mean the EU (European Union) volume restriction, on all iPods sold inside the EU, you cannot turn that off.

  • How can i take off the camara icon from de lock screen

    On the lock screen i see the camara icon, how can i take it off from the lock screen?

    It cannot be removed from the locked screen.  To open the camera, if you are using iOS 5.1, swipe the camera icon upwards.
    Message was edited by: The Huntress

  • How can i use query in Print out

    I am going to insert some Item's properties to print out of good issue, I dont know how can I use query in this tools?

    Hi,
    Please go through the following documentation on the service market place under the landing pages for
    cross topics:
    https://sapneth1.wdf.sap.corp/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=701100035871000437965&_OBJECT=011000358700003137952006E&_SCENARIO=01100035870000000183&
    Regards,
    Abhinav Banerjee
    SAP Business One Forums Team.

  • How can I tell if the print driver was updated?

    I am sorry to ask such a basic question, but I cannot for the life of me figure it out. I'm in System Profiler>Printers and I can see me printer says the driver version is 3.0.1. Is this the right place to check drivers? I have downloaded an update to make it vs. 7.3.1, but it hasn't changed.
    I am trying to get my HP 2355 AOI to scan (like everyone else), and I can't figure out what to do after the download and install of 2350731EN-1.dmg. I download it, install it and yet the driver version doesn't change. I think I am missing a step.
    Thanks.
    iMac G5 20   Mac OS X (10.4.3)  

    I am sorry to ask such a basic question, but I cannot
    for the life of me figure it out. I'm in System
    Profiler>Printers and I can see me printer says the
    driver version is 3.0.1.
    This is the version number for HP's current drivers for most of their inkjets and multifunction devices.
    Is this the right place to
    check drivers? I have downloaded an update to make
    it vs. 7.3.1, but it hasn't changed.
    This is the version number for HP's multifunction device driver set. It includes the printer driver, the scanner driver, and assorted other stuff.
    I am trying to get my HP 2355 AOI to scan (like
    everyone else), and I can't figure out what to do
    after the download and install of 2350731EN-1.dmg.
    I download it, install it and yet the driver version
    doesn't change. I think I am missing a step.
    You did everything right. HP's site is less than clear on the matter.
    You should be able to scan using the drivers in the 7.3.1 driver set, plus a graphics app such as Photoshop or Graphic Converter. There should be an app called (I think, I'm not at home where my HP MFD lives right now) HP Scan which will be called by the graphics app, or by HP Image Zone, and can be launched by itself if necessary.
    Some HP MFDs can also use VueScan. HP MFDs don't seem to like Apple's Image thingie.

  • How can I get all the print on my screen to be larger?

    How can I get all of the print on my screen to be larger?

    Thank you for helping me with the size of the print on my screen. The suggestion you made works well with the email font. I really wanted all the print on my computer to be larger. (Some of the print seems to be way too small.) Someone suggested I change the resolution settings. I did this, and changed it to 1024 X 640. That changed the size of the font on the toolbar at the top of the page, and that is what I really wanted, as well as all the other print on my screen. Nonetheless, I would like to thank you for your very helpful and prompt reply to my question.
    Sincerely,
    Wayne10

  • All-In-One C4780 screen is stuck on a loop. How can I hard reset the printer?

    I have a C4780 and am running Windows 7. I have had the printer for 2 years and never had a problem until recently. I have been unable to print for months because the touch screen on the printer is stuck in a loop. I first noticed the problem because I could hear random beeping and printer movement from the other room. It was doing it all on it's own. There were no changes to the computers, wireless or anything. I had just used it 2 weeks prior to print a passport photo and it worked fine.
    It thinks I am trying to print from a memory card and asks me to insert the card. Then it thinks I am trying to print a passport photo. Then it thinks I am scanning and asks me to place the photo face down. (etc, etc) If I try to hit cancel on any of the screens, it moves on to a different task it thinks I want done. If I try to follow through with the task it wants to do, it cancels it on it's own and moves on to another task. It will also move through the screens and tasks without me around. It moves so quickly through the screens that when I do try to get to a certain screen, I sometimes can't, because the printer has taken off in a different direction of screens all on its own.
    All software is up to date.
    I have tried turning it off, unplugging it, waiting, plugging it back in, turning it on.
    I have tried unplugging it while it is on, waiting, plugging it in and turning it on.
    I tried a semi-full reset by pressing bottom left 4 times. It was actually really difficult because the printer kept changing screens randomly while I was doing it. I finally got it to do the reset. It got to the "now printing alignment page..." screen and then just moved on to the main screen. Never printed the page. Shortly after that it started doing the screen loop with wireless settings. And now it is back to doing a loop through all the screens again. 
    It seems to be pushing buttons on its own.
    Does anyone have any idea of how I can fix this? Is there a way to do a hard-reset on this printer? Restore it to factory settings? Or doing you think there is something physically wrong with the touch screen where it is actually pressing buttons on it's own?

    I'm having the same problem, including paper running through the printer randomly. I believe I completed a semi-full reset that (so far) has stopped the paper going through the printer. And, the random changes on the touch screen seem to have stopped too. But, the touch screen still lights up and goes dark randomly, whcih leads me to believe that all is still not well.
    I too would like to try and hard reset if one is possible on this machine.

  • Airport Extreme Compatible Printers - How can you tell by the printer spec?

    Hi,
    If a printer spec says Mac OS X v10.3.9, 10.4 compatible am I safe in assuming it has drivers for Airport Extreme? If not how can I be sure? I'm trying to replace an old printer that doesn't work very well or have drivers specifically for the Airport Extreme.
    My OS is Tiger.

    There are no drivers specifically for A-Extreme. You should refer to this list:
    http://www.ifelix.co.uk/tech/1013.html

  • How can i take off the notebook s name

    I ve bought my Macbook Pro to another person and now
    Before to give the macbook to her i need to
    Take off the name i d given to it.
    I d like to delete things to macbook start
    From zero...for new notebook owner
    Will be able to give another name to it
    And havent see anything of me in this notebook.

    You must erase the drive and reinstall Mac OS X. If your Mac came with DVDs:
    1. Insert the Mac OS X disc and press C key while your Mac is starting.
    2. Go to Utilities > Disk Utility, select Macintosh HD in the sidebar and erase the drive.
    3. Install Mac OS X. When the installation finishes, turn off the computer.
    If your computer didn't come with DVDs:
    1. Press Command, Option and R keys while your computer is starting and open Disk Utility.
    2. Select Macintosh HD in the sidebar and erase the disk.
    3. Install Mac OS X. When the installation finishes, turn off your Mac

  • How can I take off the text on the bookmark bar and just leave the Icons of the bookmarks on the boomark bar ?

    I'd like to save space for more sites on my bookmark bar so I'd like to take off the text on the bookmark bar and just leave the site Icon's...that way there will be much more space to add on more sites to my bookmark bar.

    SImple open the bookmark properties and erase the name, to open the bookmark properties:
    *Go to '''Bookmarks''' >> '''Show all bookmarks''' >> or press '''Ctrl+Shift+B ''' click on the bookmark to see the properties.
    *Go to bookmark page click on the blue star to see the properties or Press Ctrl+D

  • HOW CAN I GET TO THE PRINTER CODE?

    HP Officejet 6500A printer - Windows XP.  The problem is I am trying to set up ePrint and printing from mobile devices, etc. and I am unable to find the printer code.  The printer was previously setup for use from the desktop and now I am having difficulties adding these other capabilities.

    The thread here should help:
    http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Add-your-printer-to-your-ePC-account-Print-Web...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How can I possibly get the state out?

    I'm facing with a strange records.
    I need to get the state information out from 4 column
    NameAddresses.
    Here is the scenario:
    Column NameAdd1 is populated with records like:
    1234 Smith Avenue TX 77581-5021,
    3625 Cricket Creek DR,
    555 RALPH MCGILL BLVD NE (NE is not Nebraska, NE stands for
    North East)
    Column NameAdd2:
    blank, >>>> because the State information for
    this person has been placed in NameAdd1 TX 77581-5021
    DELTONA FL 32725, >>> this is the continuation from
    3625 Cricket Creek Dr address on NameAdd1
    RIO RANCHO NM 87144 >>is a continuation from 555 RALPH
    MCGILL BLVD NE
    Column NameAdd3 :
    blank,
    blank,
    blank,
    MILWAUKEE WI 53202,
    16 Pueblo Drive
    Column NameAdd4:
    blank,
    blank,
    blank,
    blank,
    Alhambra CA 91207
    So, when Column NameAdd1 has contain State abbriviation and
    zip code (xxxxx-xxxx OR xxxxx) then other column NameAdds will be
    blank, when ColumnNameAdd1 only contain street name, then the state
    for that address is found on the next column which is NameAdd2, the
    same thing happen when NameAdd1 and nameAdd2 only contain person
    name and stree address then NameAdd3 or nameAdd4 will pick up the
    State information and zip code for this person address, etc
    What technique could possibly I use to get only the state
    from each record from these 4 NameAdd columns? can anyone offer any
    thought?

    I tried to replace the space with "I" using coldfusion's
    replace() and it did not work.
    I was thinking to create an array when I can make it into
    1234 whatever Avenue|STROUDSBURG|PA|18360
    Here is my code:
    <cfquery name="GetAdds"
    datasource="#application.maindsn#">
    select (NameAdd3+NameAdd4+NameAdd5+NameAdd6) AS FullAddr
    From Log
    </cfquery>
    <cfloop query="GetAdds">
    <CFSET MySpace="$char(0)">
    <CFSET FullAddBarDelimited=#Replace(FullAddr, "MySpace",
    "|", "All")#>
    </cfloop>

Maybe you are looking for