How can I tell BIOS Version "offline"?

Hi there,
I just got my K8N Neo2 Platinum and a 3200+ Winchester CPU. I heard that you need at least BIOS Version 1.2 for the winchester to run. I just wanted to check with you if there is any chance for determining my BIOS version without installing the board (maybe by serial number / revision number?). Of course I could install the board, but since my whole PC is watercooled, it would be very annoying to set up the whole PC just to realize that my BIOS does not support my CPU...

"version without installing the board (maybe by serial number / revision number?)"
you can't!  serial number / revision number is on the CHIP. there is nothink with information in the chip. its flashable. you dont know what version is on it.
etc you may see some hard disk SATA Seagate baracuda 80GB 8MB cache. so could you tell me what version on windows is installed on it without turning HDD on?!
you can guess for BIOS ver on chip depending on baying date on the board. or on mobo revision.
why you need this?! just put your CPU and power on. if mobo dont recognise it correctly will be desplayed "Unknown CPU type" but who care?! boot directly from floppy and update with latest BIOS. then will support your new cpu. other way to put other proccesor if mobo dont wont to boot with unrecognized CPU. and proceed with update with latest BIOS. after complete put your new cpu back.
other way is to take your BIOS chip and to flash to other the same model mobo.(but this is not reccomended)

Similar Messages

  • How can I tell what version ipad I have

    How can I tell what version ipad I have it's a 32GB  WiFi / Cellular and version number begins with MD52

    Check iPad model with the Serial Number
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • How can I tell what version a I-tv is

    How can I tell what version a I-tv is

    Hello Joe
    You can check what generation of Apple TV or any other product you have at the link below.
    Check Your Service and Support Coverage
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • How can I tell what version of Firefox I have?

    How to I tell what version of firefox I have because its been a while since i have been on ?

    On the menu bar, go to "Help -> About Mozilla Firefox" and there you can check which version you have installed

  • How can I tell what version of SharePoint Designer 2010 I have?

    I know there have been at least 2 service packs for SharePoint Designer.
    I know what version I have - 14.0.7128.5000
    How can I tell whether the service packs have been applied or not?
    Thank you.

    Hi
    check my
    post
    Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

  • How can I tell the version of bios of my Z97-3 ? Pc won't boot, Haswell Refrech

    Hey guys, my new build won't post, fans work (although my psu only has 4 pins and the motherboard has 8 pins for cpu power, i was told that it will work), the cpu fan works twice for a bit then starts working, I get no beeps (3 beeps if i remove ram).
    Here's my build :
    MSI z97-gaming 3
    Intel i5 4590 3.3ghz
    6gb 1333 twinmos ram (from old build, 1x4 1x2, works in dual mode on old motherboard)
    So how can I find the bios version that's shipped with my motherboard ? I saw the sticky post but couldn't find it under or near the cmos battery, maybe I missed it but is it the same position in new motherboards ? I'm trying to figure out if the problem is the cpu compatibility

    Quote from: Sea Dog on 07-August-14, 07:15:20
    List the serial number so the date of manufacture can be determined minus the last 3 digits.
    Added: What is the PSU brand and specifications. It 'could' be the problem.
    2nd add:    Wrong on that RAM combo! Test with just the one 4GB stick in DIMM2 slot. What is it by the way? Brand and specifications? DDR3 1333 1.5v's?
    Intel i5 5590 3.ghz
    Is that CPU model right? 
    Oh I'm really sorry about that it's the 4590 3.3ghz
    I did try out with the just the 4gb ram at every port
    Here is the serial number e516107330 02
    My psu is an older build Mmax (local company in my country) 450w, I plan on upgrading to some brand name with a bit more power to put a video card (I think my current psu can handle it but just to be safe)
    Thank you for your help !

  • How can you tell what version of Quicktime you have?

    How do you determine what version of Quicktime you have on your computer? What version do you need for a new 30G Video iPod? How do you upgrade versions, if necessary?
    Thanks in advance for any help.
    iPod mini for windows   Windows XP  

    Open a QT document and use the Help menu, where you should see an item labeled (I believe) About Quicktime Player. That should tell you the version running the player.
    You need QT Pro and QT 7 to have a preset for iPod video. You probably can use QT 6 if you use these settings in making an mpeg-4 video:
    "MPEG-4 video: up to 2.5 mbps, 480x480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats<<
    QT 7 is available for download from the Apple site by clicking on
    "Quicktime" in the Purple banner above

  • How can I tell which version has been matched?

    I have multiple versions of the same song.  Not duplicates, but remastered versions of the same song.  How do I know which version iTunes has matched?

    Thank you, but that is not the issue.  I am want to know which itunes track with which it is matched.  For instance if I have the the remastered version of a song I want to know if it has been matched to the original or remastered track in itunes.  Because the meta tags stay the same I can't tell from the track info.

  • How can I tell what version my iPod touch is

    Someone is selling an iPod - want to know how to tell what version it is

    http://support.apple.com/kb/HT1353

  • How can I tell what version of mac pro I'm buying?

    So I want to buy a quad core Mac Pro used, But the benchmark is hard for me to understand.
    It says that mac pro quad 4x 2.66 first gen got about 25 tracks
    and the quad 2.66 2009 got almost 60!
    How do I tell the difference between the two when buying used?
    I want a 2009
    Thank You!

    Yes, it sounds like 1st gen 2006. MacPro 1,1.
    Check Apple support Mac Pro specs.
    You'll have 1333MHz fsb / 667MHz FBDIMM

  • How can you tell what version of JDK a class was compiled under

    Kind Folks,
    I have a Java application purchased from a vendor that is certified to run under JDK/JRE 1.2xxx. I recently received some extensions to the application from the vendor's consulting arm but I am having problems with the extensions. I believe the extensions were compiled under JDK 1.3xxxx but I need tp prove it to the vendor. Is there a way I can verify what version of JDK a class file was compiled under?
    John Fowler

    ...version of JDK a class file was compiled under? Not sure that makes sense. The class files will run the same under both. The only difference you would see is if you got a class not found or a method not found exception. If the class/method does not exist in 1.2 but does exist in 1.3 then that is where they were compiled. Manually verifying that would take a lot of work. Running it, as long as you excercise all of the functionality, (and presuming your app is not eating exceptions/errors when it shouldn't) then you should get an exception telling you of the error.

  • How can you tell what version OS is on a macbook?

    My son has a macbook 5,2 that was recently wiped and a new OS was loaded.  I can't find out where it tells me which OS was installed.  It is not in the System Preferences.  Can someone help me?
    Thanks!

    I'll elaborate.
    You choose the apple icon in the very top left corner. From there, choose about this mac. A pop-up will show and a series of numbers will come into the screen. For example, mine is 10.8.5

  • How can I tell what version of PhotoShop Elements my serial number corresponds to?

    I need to reinstall Photoshop Elements Mac.  I went to my Adobe Account and it lists Photoshop Elements and the its serial number, but it doesn't specify which version it corresponds to.

    Twoputt I believe that error is resolvable.  I would recommend posting a new discussion in the Photoshop Elements forum at Photoshop Elements.  You may want to try searching the forum first as the error sounds familiar and I believe there is already existing discussions on how to resolve the error.

  • How can you tell what version of Secutity update is installed.

    I have osx 10.8.5. Software update says I have security update 2014-001 1.0 available for my Mac. When I try to install, it downloads, says to restart, which I do, and then gives me an error message saying the update can't be installed and to contact apple. This was done several times, with the same result. Did the system accept the update? Why does it continue to say that this update is available?

    Click  in the menu bar.
    About This Mac > More Info.. > System Report > Software > Installations
    Select "Software Name" at the top of the window , the leftmost column.
    Security Updates should be listed just below "Safari".
    Best.

  • How can you tell what version of Illustrator (Ver. 10, CS4, CS5, CC Ver.17, etc.) saved artwork is in?

    Our company needs to save artwork we create in Illustrator in different versions depending on our various client's needs. Is there anyway to know what version of Illustrator (Version 10, CS4, CS5, CC Version17, etc.) saved artwork is in? When we view preferences it just shows the current version of the application not the version the individual artwork is saved at. Any advise would be extremely helpful. Thanks.

    If you are on a Mac there's always Get Info

Maybe you are looking for

  • How can I move a mailbox folder and messages in it to a My Documents folder?

    I use meailboxes in Mail to keep project communications in while I am working on them. When the project is completed, I would like to move that mailbox and all its contents to a folder in My Documents. How do I do that?

  • 4S no longer recognized in Itunes but works for my husbands itunes on same computer

    I just tried to syn my 4s iphone to my Itunes account and itunes does not recognize my iphone.  I went through all the online help menues and even uninstalled all apple products and reinstalled.  It still does not recognize my iphone.  However, when

  • When Essbase restart, I cannot log on EAS

    Hi, After installing and configuring EPM 11.1.1.3 (Essbase + SS), I can connect correctly on EAS. But when I restart the server, I cannot log on EAS: "Could not connect to Administration Server". In the log of EAS: I have this error: com.hyperion.hit

  • Referencing EJB from WAR frile

    Dear All, I have an deployed ejb, and want to reference this in a servlet within a WAR file. How do I do this without also placing the ejb classes within the WAR ! I realise that I could jar it all up into an EAR file but would rather keep the compon

  • Mass cancellation of production order confirmation

    Hi All, Wrong confirmation is posted with no cost control key. But the operation is relevant to cost. Now we have to cancel all the wrong confirmations & re-confirm with a correct control key.  Is there any way to cancel confirmations in mass?? Pls r