How can I tell if my 2011 MBP SSD is 6Gb/s?

I ordered a Macbook Pro 15 with a 256GB SSD 3 days ago and I'd like to find out when I get it if it's functioning as a SATA II or III device. What do I have to do to find out? Thanks.

If you run System Profiler and in the left column select Serial-ATA it will then show the Link Speed in the right hand panel something like this:
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
(My current Internal Seagate drive)

Similar Messages

How can I tell if my 2011 Macbook Pro is using faster graphics option?

It's the 15 inch 2.2GHz model. Is there any way to tell when it's using the faster graphics option? I ask this because I experienced a lot of slowdown using Photoshop Elements 9 today (4GB of RAM I would have thought would run this no problem whatsoever). The only thing I can think is that the MBP isn't switching to the best graphics option.
Secondly, are there any disadvantages to turning on faster graphics at all times, other than battery?

Thespenny wrote:
Secondly, are there any disadvantages to turning on faster graphics at all times, other than battery?
I can not think of any other disadvantage, it will however run a little warmer.
You can look at your Activity Monitor.app (app/utilities/) to view your system memory for some perspective.
a lot of slowdown using Photoshop Elements 9 today (4GB of RAM I would have thought would run this no problem whatsoever). The only thing I can think is that the MBP isn't switching to the best graphics option.
This would also depend on how many apps you have up and running.

How can I tell which generation is the MBP's Core i CPU

In the showroom: How can I tell which generation is the MBP's Core i CPU?

Abdullah Tammour wrote:
In the showroom: How can I tell which generation is the MBP's Core i CPU?
Ask the sales staff.

How can I tell what is "Auto Launching"

User's (me) tech background:
Fairly technical user here, but getting pretty rusty. In a past life (late '90s) I was a network administrator as well as server admins for NT 4, Novell (up to 4.11), AIX, and HP-UX servers. Used to be really good at a command prompt ($ or #) in AIX and HP-UX as well as MS DOS. I do have ROOT enabled on my Macs and I am not afraid to use it. However, I know how severe the consequences can be (trashed a customer's AIX server once using a -R switch in the root directory), so I am extremely cautious and must be confident of the instruction. Can probably fix most anything with some guidance........
Here is the problem........ I have recently developed an error on boot, say within the last couple of weeks, where it tells me that some Vista application won't run because VM Ware will not initialize. The problem is VM Ware is not loaded on this computer (15" MBP model 8.2, i7 processor, 16MB of RAM, OS 10.7.4........ bought as a "refurb", never had a problem, have used this workstation for several months now). Boot Camp is not configured on this machine either. Nothing is in the Dock that would knowingly trigger this. When I go into System Information, I find nothing set as a "Startup Item" (screen shot attached) , making me think that I am looking in the wrong place. Where should I be looking?
Interesting enough, when I go to System Information, and look under "Applications", I do see a lot of Vista items, including apps from an older MBP that I do not connect to (on same network, they have "rights" to connect, I just never do as there is nothing on there I need). I have attached a screen shot of this as well.
Please, someone, can you give me some advice here?
How can I tell where this auto loading of this Vista app is coming from
How do I get rid of it
Why did it happen "suddenly"?
Can I go into System Info/Applications and delete any Vista or VM Ware apps?
If I cannot do this via "System Info" can I remove (rm OR mv) the files from whichever system directory stores this data?
This is puzzling and quite concerning. I would be deeply grateful if there is a "Yoda" out there that knows how to fix this.......
Thanks in advance,
Bill

Managing your data usage is very important Bag02231958. I would like to thank ttipgem for the great suggestion to see what is using data on your phone. However, when you access the internet, social media apps, stream data, videos, music, etc. that uses data on your phone. Unfortunately, we do not have a list of what specifically is being accessed on the device to incur data. You do have the ability to view data records and time frames online via My Verizon http://bit.ly/xB4iTc
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

How can I tell if my Generation one IPAD is part of the recall??

How can I tell if my Generation one IPAD is part of the recall??????

A small number of the Verizon CDMA version of iPad 2 was recalled, not the 1st gen.
http://www.wired.com/gadgetlab/2011/06/verizon-ipad-2-recall/
Stedman

How can I tell if my Airport extreme is actually running at "n" speed?

I have an Airport Extreme (802.11n) with an attached HDD that I use for storing photos etc.
When I try to access the photos with my MBP it is extremely slow. (so slow and frustrating that I usually take the notebook and sit beside the HDD so I can plug it in directly ... not exactly convenient)
How can I tell if I'm getting the full performance out of the Airport Extreme?
I have an Airport Express that I use purely for iTunes. It is NOT an 802.11n model. Will the Airport Express force the Airport Extreme to run at 802.11g speeds even if it is only used for AirTunes?
Also I have two iPhones (3G and 3GS) in the apartment that connect to the WiFi network. If I upgrade my Airport Express to be 802.11n will I still get slower (g) network speeds because of the iPhones?
Is there any option other than upgrading to a Time Capsule?
thanks
jonathan

I have an Airport Express that I use purely for iTunes. It is NOT an 802.11n model. Will the Airport Express force the Airport Extreme to run at 802.11g speeds even if it is only used for AirTunes?
Any non-"n" wireless client (including the 802.11g AirPort Express), connected to a "n" network, will reduce the overall available bandwidth for "n" devices. In addition, to allow these devices to connect, your network must operate on the 2.4 GHz radio ... which has a maximum "n" bandwidth of around 130 Mbps. The 5 GHz, with dual-channel enabled, would provide your "n" clients with 300+ Mbps.
Also I have two iPhones (3G and 3GS) in the apartment that connect to the WiFi network. If I upgrade my Airport Express to be 802.11n will I still get slower (g) network speeds because of the iPhones?
Yes.
Is there any option other than upgrading to a Time Capsule?
Yes, you may want to consider reconfiguring your AirPorts for a dual-band network by connecting the AirPort Express Base Station (AX) directly to the 802.11n AirPort Extreme Base Station (AEBSn) by Ethernet. In this configuration, you would have two separate wireless networks, one for the higher speed "n" clients and the other for the "g" clients.

How can I tell what control the modulation wheel is assigned to?

Hello,
I understand how to reassign the Mod Wheel and other controls with Command-L. However, once I deleted my learned assignments I realized that the modulation wheel had not been working as it should with the thousands of other presets. Apparently, when I assigned it to the EVP88's Tremolo, it became deactivated from controlling all sorts of fun stuff on the synths.
My questions is in a two parts:
1. If I open up some presets in the ES E (for example), I hear the mod wheel tweaking the sound, but I don't see the control it's manipulating when I'm looking at the instrument window on the screen. How can I find out what control the mod wheel is linked to in each instrument?
2. If I want to reassign the mod wheel on a particular instrument preset, how can I tell logic that this assignment should only be aplicable in a particular preset, and to forget that reassignment when swiching instruments or presets?
Thanks in advance,
I'm proudly 10.6.8 and staying there
Logic 9.1.8
MacBook pro early 2011 refurbished

I don't recall there being a way that I've seen to find out if the Hotspot is connected to Band 4 or Band 13. The diagnostic pages are very basic.
A good rule of thumb with Band 4 is to consider the following. If you have 3 bars or less, you're likely not on Band 4. The device will head to Band 13 as it will usually provide better signal reliability. If you're indoors, you're more likely to be on Band 13.
Also take note that Wi-Fi is a common limiter on the speeds you'll get. You'll usually see nothing more than 30Mbps on most Wireless N devices. Connect to the Hotspot using USB Tethered mode and speeds should be a bit better.

How can I tell what datacentre I'm using?

Apologies, I'm a Newbie. How can I tell where my servers are. Country is OK, I don't need to go to the Data Centre.
As a Cloud Partner with a "free" account, maybe I don't have a choice, but I'd like to know the servers are in Canada, and not the US. I don't recall being asked at setup time.
Thanks kindly,
David P.

Hi,
You could see your service location information from azure portal, like this picture:
Also, you could see this blog about the azure datacenter location(http://matthew.sorvaag.net/2011/06/windows-azure-data-centre-locations/ ).Hope this helps.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can you tell if you Mac is overheating?

How can you tell if your MAC is overheating or running too hot?

Make sure you are using your MBP properly as it is not a "laptop."
According to the user manual it states in part:
"Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."
MacBook Pro: Care, Use, and Safety Information
"Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn."

Referenced masters: How can you tell where a photo's master is?

After reading many recommendations on this site, I have set up my main library on my internal HD with referenced masters on an external HD.
Now I need to import a job which I shot out of state and which was saved as a managed library on my MBP. So I copied it to an external drive and then Imported it into the main A3 library. That worked just fine but it seems like it copied all the masters as well as the versions from that new library into the main one.
Before I try to relocated them, how can I tell where the master for a particular photo is located?
Thank you very much.
Bo

Versions are always in the Library (they are text instructions saved to a file and applied on-the-fly to the Master in order to produce the image on screen (mostly)). Masters are either in the Library (in which case they are "Managed"), or not in the Library (in which case they are "Referenced"). The Library is a "package". A package is a container of files which shows as a single file to the user.
Badges tell you the status of the Master on which the Version is based. No badge = Managed. Referenced Masters show a badge. Off-line Referenced Masters show a modification of this badge. Versions with Missing Masters show yet another version of this badge.
Badges can be toggled to show or not via the Metadata Overlays. All seven of the Metadata Overlays can be customized.
Use the filter Rule "File Status" to filter for "Managed", "Referenced", "On-line", "Off-line", and "Missing".
If you want to move all Manage Masters to your external drive, in Photos view filter using the "File Status" Rule set to "Managed", then select all and "File→Relocate Master".

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

The amount of storage that is shown on the box and in Settings are calculated differently - the package uses 1 billion bytes as a gig (i.e. decimal), whereas in Settings it's shown as the binary definition : http://support.apple.com/kb/TS2419
Also some space has been used for iOS, the built-in app and some space is lost due to formatting.

"Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
in both cases I can only see the photos in 'photos' because 'events' shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
3) iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
"Volumes" are the original files aren't them?
Please help. this is so annoying to try and find in the forum, to tricky to explain
I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
THANK YOU
Vicky

The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
This is not clear, especially when you say
I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
So it's a simple question:
Are you these Managed or Referenced Libraries?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

How can i tell what computers are authorized with my itunes account?

My iTunes app tells me that I have 5 computers currently authorized with my account. How can I tell which ones they are??? I've checked all of my old desktops and laptops to deauthorize them but they indicate that they were never authorized. Confusing. Why go to the trouble managing how many are authorized if you don't provide a means to list them??? I realize that I can deauthorize them all (the only choice!) but, in doing so and reauthorizing the ones I need, does this mean that I lose the ability to access previously purchased music on them?? I must say that, for the ease of use of the Apple apps, I expected more. Thanks:-) !

You cannot. You can see the number of authorised machines.
Go to itunes Store, Select Account from Quick Links on the right.
If you already have 5 authorised but can't remember which the machines are you have the option of once every 90 days to deauthorize all comuters and then individually reauthorising the ones you want.
On each machine in iTunes Click Store > Authorise this computer

How can you tell if a pic hasnt been tagged by iPhoto, and do you then...

How can you tell if a pic hasnt been tagged by iPhoto, and do you then do you then have to draw "missing box" around them
What I mean is tagged a few faces, imported some more pics, checked a few and they dont show as named faces, but are faces that are in my Faces source list (ie identified and named)
So do I then have to draw a box around known faces to me, and name them again (I think iPhoto will pop up as Im typing the names I already have)
It just means that even when i import and it doesnt name, I may have lots of pics that are of faces but not tagged and so not in my faces source list
please help
cheers
ps when are Apple going to upload the Getting Started manuals for iLife 09? its been a while since released now, ad they give a bit more insight than the video tutorials alone

No-one? It'll be nice to know how many pics of faces that arent yet tagged
cheers

How can I tell if my 2011 MBP SSD is 6Gb/s?

Similar Messages

Maybe you are looking for