How can I tell if my full recovery is stalled?

I reformatted my drive and re-installed the system software today around 2 pm. After doing that I connected to my Time Capsule to do a recovery of my old data. It gave me an estimate of 16 hour and 6 minutes on the "Transferring Information" screen.
So here I am 6 hours later. The progress bar has only moved about 1/20 of the way and it is still giving me the 16 hour estimate.
Should I abort? And if so, how do I do that since there is no menu bar or options on this screen? Or should I let it go tonight and see if there is any noticeable progress in the morning?
MacBookPro
Installed 10.5 from disc
Did not run Software Update before starting the backup
Doing the backup over wifi - I tried to plug an ethernet cable from computer to Time Capsule, but it didn't find it. It only found the TC over my wireless network.
Thanks for any suggestions/help.
-caryl

So - an update on this...
After about 64 hours on the Transferring Information screen (and much hand-wringing on my part), my system restore completed.
I had only chosen to restore my Document/Pictures/Music. Not sure how long it would have taken to restore my Applications folder - probably a lot more time than it would have taken to just re-install all my old software from downloads/disc.
Tried to open up the Migration Assistant to even see if I could recover any of my Apps, but it won't connect to my backup disc now. And when I open Time Machine, I cannot see my backup data anymore. It starts at Today.
-c

Similar Messages

There are so many add-ons now that do the same thing, how can I tell the full features of an add-on compared to the others. I know I have way to many of the same and need to get rid of the unwanted ones?

can we get a side by side comparison of the add-ons. How can I tell Ive got 2 or even 3 add-ons that do the same thing? and how can I pick the best one for my needs so I can uninstall all the others?

I mutled through best I could but I know I still have duplicate apps, different names, but same functions. One last thing is why do I keep getting 2-3 times a day that firefox needs a major update? I let it go through its motions but then that same msg pops up again a few hours later

How can I tell if my iPad is about to overcharge?

How can I tell if my Ipad is about to overcharge? I can I avoid overcharging it? Thanks!

There are no modern day consumer electronics that you can overcharge... they all have protection for this, i.e. they stop charging when full. This may not be completely true for some really cheap Chinese knock-offs.

How can I tell if my iPod touch is water damaged?

How can I tell if my iPod touch 5th generation is water damaged? It will not turn on or charge but I can't tell what is wrong with it.

Without cracking it open you really can't. This is a long shot, you could try drying it out. Do not attempt to charge or turn on, leave it off. Place it in a sealed bag of uncooked rice for about a week. change the rice every couple of days. After you dry it attempt to turn it on, you my need to charge it first, about 30 minutes. If it works great, if not you may need to reset or attempt to restore. And it may never work again, but for a couple of dollars of rice its worth trying. If you do get it to work the first thing you want to do is make a full backup to your computer. The thing with water damage is you just don't know how long it will continue to work. If you go to Apple be prepared to spend some money, water damage is not covered with the standard warranty. Good luck, hope this helps. Cheers.

How can I tell if my Airport extreme is actually running at "n" speed?

I have an Airport Extreme (802.11n) with an attached HDD that I use for storing photos etc.
When I try to access the photos with my MBP it is extremely slow. (so slow and frustrating that I usually take the notebook and sit beside the HDD so I can plug it in directly ... not exactly convenient)
How can I tell if I'm getting the full performance out of the Airport Extreme?
I have an Airport Express that I use purely for iTunes. It is NOT an 802.11n model. Will the Airport Express force the Airport Extreme to run at 802.11g speeds even if it is only used for AirTunes?
Also I have two iPhones (3G and 3GS) in the apartment that connect to the WiFi network. If I upgrade my Airport Express to be 802.11n will I still get slower (g) network speeds because of the iPhones?
Is there any option other than upgrading to a Time Capsule?
thanks
jonathan

I have an Airport Express that I use purely for iTunes. It is NOT an 802.11n model. Will the Airport Express force the Airport Extreme to run at 802.11g speeds even if it is only used for AirTunes?
Any non-"n" wireless client (including the 802.11g AirPort Express), connected to a "n" network, will reduce the overall available bandwidth for "n" devices. In addition, to allow these devices to connect, your network must operate on the 2.4 GHz radio ... which has a maximum "n" bandwidth of around 130 Mbps. The 5 GHz, with dual-channel enabled, would provide your "n" clients with 300+ Mbps.
Also I have two iPhones (3G and 3GS) in the apartment that connect to the WiFi network. If I upgrade my Airport Express to be 802.11n will I still get slower (g) network speeds because of the iPhones?
Yes.
Is there any option other than upgrading to a Time Capsule?
Yes, you may want to consider reconfiguring your AirPorts for a dual-band network by connecting the AirPort Express Base Station (AX) directly to the 802.11n AirPort Extreme Base Station (AEBSn) by Ethernet. In this configuration, you would have two separate wireless networks, one for the higher speed "n" clients and the other for the "g" clients.

How can i get the document full path in S_TieDocument?

I create a new S_TieDocument and override 2 methods:
extendedPreInsert and extendedPostInsert
how can i get the document full path in these 2 methods?
(e.g. if i use the system user to upload a new file named 'test.file' in system root path /home/system, and i want to get the document full path '/home/system/test.file', how to get it?
anybody know it, pls tell me, thanks a lot.
java source is as below
package oracle.ifs.server;
import oracle.ifs.beans.Document;
import oracle.ifs.beans.DocumentDefinition;
import oracle.ifs.beans.LibraryObjectDefinition;
import oracle.ifs.beans.LibrarySession;
import oracle.ifs.beans.PublicObject;
import oracle.ifs.common.AttributeValue;
import oracle.ifs.common.IfsException;
import oracle.ord.itech.cmsdk.ws.view.EmbeddedCMSDKWebServicesWSStub;
public class S_TieDocument extends S_Document
public S_TieDocument(S_LibrarySession session, S_LibraryObjectData data)
throws IfsException
super(session, data);
public S_TieDocument(S_LibrarySession session, java.lang.Long classID)
throws IfsException
super(session, classID);
// Overrides
public void extendedPreInsert(OperationState opState,
S_LibraryObjectDefinition def)
throws IfsException
// Always call super
super.extendedPreInsert(opState, def);
// Get the LibrarySession
S_LibrarySession session = getSession();
def.setUserSetAttribute("CUSTOMATTRIBUTE",
AttributeValue.newAttributeValue(""));
//how can i get the document file full path here?
public void extendedPostInsert(OperationState opState,
S_LibraryObjectDefinition def)
throws IfsException
// Get the LibrarySession
S_LibrarySession session = getSession();
//how can i get the document file full path here?
}

In the new version of Numbers this option is not available. You will have to type the file name into the header yourself. You can post feedback to Apple using the menu item "Numbers > Provide Numbers Feedback"
or use Numbers2.3 which should be in the folder "/Applications/iWork '09" if you previously had it installed

Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

Not sure how I would tell if the contacts are stuck, but they look normal. The other stuff:
Battery Information:
Model Information:
Serial Number:    W0046Q08UBX0A
Manufacturer:    SMP
Device name:    bq20z451
Pack Lot Code:    0000
PCB Lot Code:    0000
Firmware Version:    0201
Hardware Revision:    000a
Cell Revision:    0157
Charge Information:
Charge remaining (mAh):    3211
Fully charged:    No
Charging:    No
Full charge capacity (mAh):    5845
Health Information:
Cycle count:    943
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    -1354
Voltage (mV):    11210
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    10
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Wake On LAN:    Yes
Display Sleep Uses Dim:    Yes
GPUSwitch:    2
Battery Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    2
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Current Power Source:    Yes
Display Sleep Uses Dim:    Yes
GPUSwitch:    2
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    No
Charging:    No

How can I tell if my boyfriend is stalking my phone?

My boyfriend seems to have too much information that he is not privy to - how can I tell if he has tapped my phone?

Does he know any of your AppleIDs and their passwords? If he knows the AppleID you use to login to iCloud, then he has full access to your iCloud account. If he knows the AppleID and password you use for iMessage, then he can access your iMessage account.
If he does not know any of your AppleIDs and passwords, and if he does not have ready full physical access to your iPhone, then it is almost certain that he cannot track you. If he does have physical access to your iPhone, then all bets are off, as anyone with actual, unlocked physical access to the device can install any sort of software or hack they wish to.

How can i tell what generation of ipod shuffle I have?

We have various ipods and I need to know what generation of ipod shuffle we have. How can if tell?

This document about resetting the iPod shuffle shows a picture of the four types.
http://support.apple.com/kb/ht1655
1st gen - It is white plastic and looks like a USB "thumb drive." It as a full USB connector on it, so you don't need a cable to connect it to the computer.
2nd gen - It is a clip-on design. It has separate switches for setting playback order (shuffle or in order) and for turning ON/OFF.
3rd gen - It is a narrow clip-on design, with no playback control buttons on the shuffle itself. You use the "remote control" buttons on the ear buds cord. It has the new VoiceOver feature.
4th gen - Apple went back to the 2nd gen style, except smaller. It has only one switch that is both for setting playback order (shuffle or in order) and turning ON/OFF, plus a small VoiceOver button (for using the VoiceOver feature introduced in 3rd gen)

HT1338 Yesterday, I purchased Mountain Lion OSX and tried to download it but I don't think it worked. How can I tell if I am using Mountain Lion and how do I get help if the download was unsuccessful?

Yesterday, I purchased Mountain Lion OSX and tried to download it but I don't think the download worked. How can I tell if I am using Mountain Lion and how do I get help if the download was unsuccessful?

Click your Apple menu icon top left corner of your screen.
From the drop down menu click About This Mac.
If Mountain Lion is installed, it will say: v10.8
If not, launch the App Store. From the App Store menu bar click Store > Check for Unfinished Downloads
FYI .. for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
If you need to reinstall OS X or repair the the startup disk Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

Touchsmart 320, windows 7 how can i tell if the caps are on?

how can i tell if the caps are on?

If you have the HP Keyboard software installed, you are supposed to get an on screen display that pops up in the lower left corner of your screen showing you when numlock, caplock are enabled. If you don't get that, you can try reinstalling the keyboard software using HP recovery manager (just the keyboard software - do not do a system recovery!)
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

How can I tell if direct-path insert is really being used?

I have a number of INSERT statements with /*+ APPEND */ hints, that I suspect are not using direct-path insert processing. How can I tell (via the plan, via Enterprise Manager, whatever) if direct-path is being used?
If it is not being used, then I can research why that might be, and try to resolve the obstacles there. But if it is being used, then I want to know that so I can focus elsewhere.
Thanks,
Mike

mtefft wrote:
The question of whether direct-path is possible with multi-table inserts has been on my mind...
Moreover, in another forum post, we have eyewitnesses that it has happened at least once:
APPEND Hint in Multi-table insert
So I think that post (giving examples of Explain plans with multi-table inserts successfully using direct-path) answers my question.
Mike,
Thanks for that link. When I checked my example again I realised that it had a foreign key constraint between the two tables I was inserting into. (It was a demonstration of how to normalise an incoming denormalised address table, so converted a flat table into address/address lines). When I removed the constraint I got the multi-table insert.
However, I followed this up with a check on the execution plans and for the 10.2.0.3 I was running noted the following:
Plan reported after running the insert and select from dbms_xplan.display_cursor()
| Id | Operation           | Name | Rows | Bytes | Cost |
|   0 | INSERT STATEMENT    |      |       |       |    30 |
|   1 | MULTI-TABLE INSERT |      |       |       |       |
|   2 |   TABLE ACCESS FULL | T3   | 10000 | 1240K|    30 |
------------------------------------------------------------Plan reported after explain plan / select from dbms_xplan.display()
| Id | Operation           | Name | Rows | Bytes | Cost |
|   0 | INSERT STATEMENT    |      | 10000 | 1240K|    30 |
|   1 | MULTI-TABLE INSERT |      |       |       |       |
|   2 |   DIRECT LOAD INTO | T1   |       |       |       |
|   3 |   DIRECT LOAD INTO | T2   |       |       |       |
|   4 |    TABLE ACCESS FULL| T3   | 10000 | 1240K|    30 |
------------------------------------------------------------If you try to check for direct path inserts by looking at the in-memory plans, you might not see the direct load that is really happening. (Perhaps the a check that both / all the target tables are locked with TM mode 6 may give you a clue.)
Regards
Jonathan Lewis

HT204266 how can you tell if an app update is free?

I constantly get app updates, it seems as if I am be charged for them, how can you tell if an app update is free?

I have never been charged for an app update. Which apps are you being charged to update? There should be no charge for an update.
If you upgrade the app from a lite version to a full version, there will be a charge for that.

I just attempted to download a file and send to me, but it may have gone out to all my contacts - how can I tell?

I was just attempting first use of adobe send and it looks like I may have sent this to all my email contacts, how will I know?

Did the unshare. Thank you
From: bob.treitman <[email protected]>
To: Robert Goldsmith <[email protected]>
Sent: Tuesday, March 31, 2015 2:52 PM
Subject: I just attempted to download a file and send to me, but it may have gone out to all my contacts - how can I tell?
I just attempted to download a file and send to me, but it may have gone out to all my contacts - how can I tell?
created by bob.treitman in Adobe Acrobat.com Services - View the full discussionIf it says "Anonymous" then the only way that it would have gone out to all of your contacts would be if you sent it to them through your email client. And it would be in your email's Sent folder (not Adobe Send's). If you look at https://cloud.acrobat.com/sentfiles, does it show that the file has been Viewed? If the Views column shows a 0, then nobody has yet viewed it. If you're concerned, you can select the file by clicking the check box, then select Unshare. That will make the file inaccessible to anyone other than yourself. https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-7392942-745487/900-90/SentTab .png If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7392942#7392942 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7392942#7392942 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Acrobat.com Services by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can I tell if my fan on MacBook Pro is working properly? It seems to be running often and the laptop feels hot!

How can I tell if my fan on MacBook Pro is working properly? It seems to be running often and the laptop feels hot!

Isn't it awesome that after you spend 2500$ + on a laptop you need to also become a computer technician in order to keep it working. The fan in my MacBook Pro runs all the time and the computer is also very hot all the time. I always try to make sure it's not sitting on a flat surface that might make it run hotter. I'm running 10.6.8. Is there anything I can do to fix this? When should the fan be running? Should it run when I have more than one program running at a time? Is the MacBook Pro designed to only run one program at time? At the moment I'm watching a show via Firefox. There are no other programs running, the computer is raised off the table, the fan is running at about half the speed it usually does, moments ago the fan was going full bore. Google Browser was open, iTunes was open, text edit was open, but none of them being used - I was using Firefox and watching a movie online with browser window on fullscreen. Anyone got any suggestions? Should I just enroll into a university and begin my studies as computer technician?

How can I tell if my full recovery is stalled?

Similar Messages

Maybe you are looking for