How can I tell if my internet problem is caused by firefox, my computer, or my internet connection?

At certain times of the day (usually only late at night), my internet becomes unusable. The websites take so long to load that they just time out (or I give up). It happens periodically in the early evening as well (I just tried to watch a two-minute video and it took me half an hour). I can't tell if the problem is caused by firefox, my computer, or my internet. What can I do to determine where the problem is?
Thanks!

You have several issues.
*1
Your System Details shows;
Installed Plug-ins
Adobe Shockwave for Director Netscape plug-in, version 12.1.1.151
Adobe Shockwave for Director Netscape plug-in, version 12.0
Having more than one version of a program may cause issues.
Flash is notorious for not cleaning out the older version as part of an update.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Flash Player '''v15.0.0.223 http://get.adobe.com/flashplayer/'''
Shockwave Director '''v12.1.4.154 http://get.adobe.com/shockwave/'''

Similar Messages

How can you tell if there is a malisious IP address on your computer?

This question was solved.
View Solution.

If you know the address check here:
http://www.threatstop.com/checkip
Also see free online tools
http://zeltser.com/combating-malicious-software/lookup-malicious-websites.html
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

How can I transfer photos from my iPad to memory stick without a computer? No internet connection.

Transferring photos from iPad to memory stick.

That's the truth.
I went shopping yesterday and bought a £25 lightning adapter to SD card for my iPad. Today I find out I cannot perform the extremely simplistic task of copying my required photos to my SD card using the adapter ...
Any other tablet or phone would do this.
I now face an uphill struggle to get these photos off of the iPad and onto an SD card before going to the camera shop to get them printed on photo paper. I am due at my terminally ill mothers house in 1hour20mins. It will take me 1 hour to drive to her town. I then need to get to the camera shop and print these pictures off - I reckon at least 30mins to park and print them. And this does not factor in the wasted time and money I have already spent this morning getting nowhere with this useless adapter. It does not factor in the time wasted now trying to get these photos off my iPad, on to a computer, then on to an SD card - then leaving the house............
I think me and Android are going to be very good friends.

Trying to start itunes - message appears "APSDAEMON.EXE MSVCR80.DLL is missing. Then another box indicates "Error 7 (Windows error 126). Itunes will not start. Can someone tell me what the problem is and how to fix?

when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

The battery is fully charged so it is not the problem.
What happens when you use the MagSafe?

HT1515 Just installed Airport Express on Mac 10.6.8 Can't see base station. Hard Reset the Airport. Rebooted machine. How can I tell if this is a Mac problem or Airport Express Problem?

I have a Mac 10.6.8. Just installed Airport Express. I can't see any base stations. I did a hard reset on the Airport Express, turned off all devices, turned them back on. I see plenty of Airport networks in the neighborhood. How can I tell if I have a Mac problem or an Airport Express problem? Airport Express blinks Amber.

Obviously, I'm still using ethernet to be able to reply to this.
Alright, use the same ethernet cable to plug directly into the airport express. This will FORCE the airport utility to now see it regardless of weak signals & interference. You can set it up that way.
BTW, what is the original intent on the express?

Hi, Please tell me how can I send the Music Videos to the I Pod From the Computer, I'm so upset about this problem, Please help me ASAP.

Hi, Please tell me how can I send the Music Videos to the I Pod From the Computer, I'm so upset about this problem, Please help me ASAP.

Here:
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
or
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

HT5569 How can I tell if iPhone Internet connection is rooted through another computer

How can I tell if iPhone Internet connection is rooted through another computer

If you are connecting directly to your WiFi router which coonects to your ISP modem then another computer is not involved.

How can I tell what is "Auto Launching"

User's (me) tech background:
Fairly technical user here, but getting pretty rusty. In a past life (late '90s) I was a network administrator as well as server admins for NT 4, Novell (up to 4.11), AIX, and HP-UX servers. Used to be really good at a command prompt ($ or #) in AIX and HP-UX as well as MS DOS. I do have ROOT enabled on my Macs and I am not afraid to use it. However, I know how severe the consequences can be (trashed a customer's AIX server once using a -R switch in the root directory), so I am extremely cautious and must be confident of the instruction. Can probably fix most anything with some guidance........
Here is the problem........ I have recently developed an error on boot, say within the last couple of weeks, where it tells me that some Vista application won't run because VM Ware will not initialize. The problem is VM Ware is not loaded on this computer (15" MBP model 8.2, i7 processor, 16MB of RAM, OS 10.7.4........ bought as a "refurb", never had a problem, have used this workstation for several months now). Boot Camp is not configured on this machine either. Nothing is in the Dock that would knowingly trigger this. When I go into System Information, I find nothing set as a "Startup Item" (screen shot attached) , making me think that I am looking in the wrong place. Where should I be looking?
Interesting enough, when I go to System Information, and look under "Applications", I do see a lot of Vista items, including apps from an older MBP that I do not connect to (on same network, they have "rights" to connect, I just never do as there is nothing on there I need). I have attached a screen shot of this as well.
Please, someone, can you give me some advice here?
How can I tell where this auto loading of this Vista app is coming from
How do I get rid of it
Why did it happen "suddenly"?
Can I go into System Info/Applications and delete any Vista or VM Ware apps?
If I cannot do this via "System Info" can I remove (rm OR mv) the files from whichever system directory stores this data?
This is puzzling and quite concerning. I would be deeply grateful if there is a "Yoda" out there that knows how to fix this.......
Thanks in advance,
Bill

Managing your data usage is very important Bag02231958. I would like to thank ttipgem for the great suggestion to see what is using data on your phone. However, when you access the internet, social media apps, stream data, videos, music, etc. that uses data on your phone. Unfortunately, we do not have a list of what specifically is being accessed on the device to incur data. You do have the ability to view data records and time frames online via My Verizon http://bit.ly/xB4iTc
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

How Can I Tell if My iPad Air Replacement is New or Refurbished

I'm getting a replacement iPad Air because mine had a problem with it, there were loose magnets in it. I've heard that people have another person's data on apps they have just downloaded and that makes me really uncomfortable.
How can I tell if my replacement is brand new or just refurbished? Is there info in the serial/model number?
Thanks.

You might hear a lot of things on the Internet but that doesn't make them true.
If you got a refurbished iPad from Apple it would be completely empty.
Refurbished iPads are identified on the packaging.
You can see the model number in Settings > Genera l> About > Model. The model number has a two-letter code, a number and some more letters. The last part stands for the country/region. The first letter can be "F" (refurbished), "M" (normal retail), or "P" (personalized / engraved).

[p7-1240] How can I tell which graphics cards will work with my motherboard?

I recently went through the nightmare of trying to install a Gigabyte GTX 650 in my PC. After a few days of struggling and scouring the internet for answers, I discovered that it is incompatible with the BIOS on my motherboard, and HP does not offer BIOS updates. I returned the card and am now looking for a new one, but I am unsure of which cards will work now, since my computer met all of the system requirements for the graphics card, and It stil ldid not work. Since GPU manufacturers do not list BIOS specs under system requirements, how can I tell if a graphics card will work with my sytem?
My computer is a p7-1240 with an upgraded 520W PSU and approximeately 11" of room to install the card.
This question was solved.
View Solution.

Thexn, welcome to the forum.
The problem is, many of the newer video cards require the computer to have a full UEFI BIOS. HP began using one in mid-October, 2012. Before this date the BIOS is Legacy. This is why the video card didn't work with your computer.
I don't know what you want to spend for a card, but MSI makes a GTX 750ti that has a hybrid VBIOS. It has a switch to change to Legacy or UEFI. There is a video link directly below the picture of a card. Paul from Newegg gives a full description of the card.
I like EVGA cards the best. Their Tech Support has given me a lot of information about their cards. However, you have to go back to a GT 640 card to find one of their cards that doesn't require the UEFI BIOS. They do have some updates for their BIOS'es that solve the problem, but you have to call them for the exact cards.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

"Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
in both cases I can only see the photos in 'photos' because 'events' shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
3) iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
"Volumes" are the original files aren't them?
Please help. this is so annoying to try and find in the forum, to tricky to explain
I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
THANK YOU
Vicky

The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
This is not clear, especially when you say
I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
So it's a simple question:
Are you these Managed or Referenced Libraries?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

How can I tell if a photo in an event is associated with a gallery?

How can I tell by looking at a photo in an event if that photos is currently being published to a gallery?
Alternatively, is there a way to make an event automatically tied to a gallery so that when the event is added to or changed, the gallery is also?
In general I'm having trouble deciphering the connection between galleries and events.
Thanks.
A Musliner

Welcome to the Apple Discussions. What I do for my web gallery photos is to flag them. That tells me in the Photos mode or Events mode which photos I've used in a web gallery. You could use a keyword to do that also.
There is no unique connection between a web gallery and Event. A web gallery can be create from photos in multiple events. Generally speaking most users will assemble the photos in an Album and then create the gallery from it. Just makes getting all the photos into one group easier. Once a gallery is created it is no longer directly connected to that album, i.e. adding new photos to the album will not update the gallery. New photos have to be added directly to the gallery.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How can I tell if my computer is using ethernet or wireless for downloads?

Hi,
My computer is hooked up via ethernet to my router (base station) which is connected to my DSL modem, and I also have my Airport on because I have extended my network with an airport express so I can stream music to my stereo across the room using iTunes.
I've noticed in the Airport menu that my computer is connected also to my wireless network which I use for getting online with my iPad.
Can I assume that my computer will use ethernet and NOT wireless for accessing the internet, downloading files, etc?
How can I tell which network connection is being used? Are there tools for monitoring the network that would allow me to easily determine if a particular download is going over the ethernet or the wireless connection?
Clearly, I want to use the hard line ethernet connection for everything and use the wifi only for my streaming music function for speed purposes...
Thanks!!!!
Elisabeth

Hi,
Internet is served on the priority basic from the System Prefrences Network pane.
If ethernet is on top you getting it from ethernet if Airport and so on...
So depending on internet speeds set the priority to access fast internet speeds.

How can I tell if replacement LCD is "good"?

Hi everyone
I bought a used 20" Intel iMac that supposedly only needed a hard drive and a new LCD panel in order to work. The hard drive was easily installed. I ordered a replacement panel off eBay and installed it, but I'm seeing a grey screen with lots of tiny black rectangles on it. I figured that maybe there's a problem with the video card, so I scrounged up a Mini-DVI to DVI adapter, and connected an external monitor. However, nothing ever displays on that external monitor. If there is truly a problem with the video card (the logic board?), I'm going to stop buying parts and sell the carcass....
Anyway, how can I tell if the replacement LCD is good? Does the weird pattern I'm seeing on the display indicate a problem with the panel or with the video card? And shouldnt the iMac automatically output to the external display when I connect it via the adapter?
Thanks!

Hello, does it sound like it's booting up at all?
If we could get it to boot, we could take a screen grab & that would tell us, if the screen capture was indentical to wahat you're seeing then it'd be the graphic card, since it captures it from the card/VRAM, not the screen actually.
As far as the adapter I think you have to have it at least booted up part way for a second monitor to even light up, not positive though.

How can I tell if my internet problem is caused by firefox, my computer, or my internet connection?

Similar Messages

Maybe you are looking for