How can I tell if my Mac Mini has what it takes to support Windows XP OS?

I need some help understanding how the whole Windows OS thing works with my Mac mini. I'm totally clueless about it.
The first thing I would like to know is if my Mac has enough memory & power to accommodate the additional Windows OS without compromising its performance?
Here's a list of what I have to work with. I have no idea about what any of this means but I'm hoping someone can use the info to assess my needs.
Model Name: Mac mini
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 1.25 GB
Bus Speed: 667 MHz
When I bought my Mac mini I was told that its ROM size was 80GB. I partitioned the HD into 2 HDs when I select them individually & choose get info, one partition says MacHD1 Capacity: 39.88GB & the second partition says MacHD2 Capacity: 34.21GB. When I total up the memory capacity of both partitions I get a total of 74.09. What happened to the remaining 5.91GB?
Would it still be possible to install Windows on at least one HD partition or would it be better if I joined the two HD partitions (after reinstalling MacOS) & then install Windows?
Assuming that my Mac has the necessary memory & speed to run Windows, how do I begin the process of installing the Windows OS on my Mac? And, in the same respect, assuming that it doesn't meet the sufficient standards, then what can I do, if anything, to improve my Mac's performance so that it can support the additional OS?
Also, I have Virtual PC with Windows XP installer. When I bought VPC I was told that the package contained the full version of Windows XP OS. Can I use this software to install Windows XP, without installing VPC, or will I have to purchase the XP installation disc? Basically I would be buying something that I already have & I would like to avoid this if possible.
That's all. Any information would be helpful & greatly appreciated. THANX!
AJ

Thanks for responding. I've actually decided to just throw myself in with the wolves and buy Windows XP along with Parallels Desktop and figure it all out on my own.
Thank You!
AJ

Similar Messages

  • How can you tell if you iPad mini has a virus?

    I was on Safari and I clicked out of something and a pop up said that I had downloaded  a Trojan horse. And then a website came up saying you android has a Trojan click here to get rid of it. I exited out of it.
    ipad mini iOS 7.1.1
    i logged out of all my accounts after that and turned off the wifi.

    As of now, there are no known viruses, or trojans or malware capable of affecting an iPad.  Whatever you clicked on was likely just a hoax trying to get you to download something purporting to clean out whatever it was it said you were infected with, which itself would have had some virus or trojan in it.
    As it stands, just ignore it.

  • How can I control my my mac mini with my macbook air (no wifi)?

    How can I control my my mac mini with my macbook air (no wifi)? Also...what is the best method (less lag) for screen sharing? 
    I own a mac mini Quad Server 2.0 i7 and I use it for audio production.  It's great but I need to travel with it. I was hoping some form of screen sharing could be useful using the macbook air to control the mac mini.  Therefore, I'd be using the stronger processor of the mac mini but would still be using the keyboard and trackpad from the air. 
    My two problems: 
    1.  I can't depend on wifi to make this happen. Wifi is not always available when travleing.  What would be the best way to configure a LAN connection?
    2.  The less lag the better for screen sharing.  Which apps are fastest?
    Thanks in advance.

    Both of your devices have WiFi built in. Here is Apple Support's solution:
    http://support.apple.com/kb/TA25616?viewlocale=en_US&locale=en_US

  • How can I authorize my new Mac Mini to use downloads in my iTunes account?

    Hi. How can I authorize my new Mac Mini to access music on my old itunes account?

    Choose Authorize Computer from the Store menu at the very top of the computer's screen.
    (73809)

  • How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

    How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

    Composite is analogue with one connector. That is why it is called composite
    Component is analogue with three connections. I think one for each color
    Here is the one for component. I misread composite for component
    http://www.amazon.com/DVI-I-Component-DisplayPort-Female-Adapter/dp/B003OBOJC2

  • How can you tell if you Mac is overheating?

    How can you tell if your MAC is overheating or running too hot?

    Make sure you are using your MBP properly as it is not a "laptop."
    According to the user manual it states in part:
    "Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."
    MacBook Pro: Care, Use, and Safety Information
    "Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn."

  • How can I tell if my iPad 5 has A2DP?

    How can I tell if my iPad 5 has A2DP?

    http://support.apple.com/kb/HT3647
    There is no "iPad 5" as an official model designation. Did you mean an iPhone 5 as you list in your profile?
    Regards.

  • How can I tell if my mac has the Apple "quite kit"?

    Hi, how can I tell if my dual processor 1.42 ghz fw800 mac has the Apple "quite kit"? I've had it with the loud noise now. I can hear the fans from other rooms.
    If my mac does have the kit, I'll definitely look into upgrading the fans. Which fan brand is the best for this model mac?
    Thanks a lot!

    Hi, and welcome to the Discussions!
    Check the PSU. It should be a 360 watt model and not a 400 watt model. Also, the fans should be manufactured by Papst, not Sensflow. Here's a good link with info on this subject.
    I am under the impression that the FW800 Macs all shipped with the quiet kits installed and that the mods were meant for the MDD Macs, though I could be wrong...
    Gary

  • How can i tell if my iphone 4 has been hacked into?

    Here is the situation.....a friend of mine is in a bad marriage. She found out her husband bugged her laptop and her phone and is finding out all of her conversations. The other day, we were all at a buffet restaurant and he was sitting at the table with us, without thinking anything of it, I left my purse with my phone at the table while all but him went up to the bar. Later on that night, I was in the car with another friend and we were talking in detail about our friends situation. The next day my friend whom I was talking to in the car, checked her answering machine, and our conversation was on her machine. I checked my call log AND detailed billing from AT&T  thinking I may have butt dialed her house, but there is no record of me calling her house. The same with her, she as no record of calling her house and her home phone does not have caller ID. This guy is very tech savy and is the manager of 4 AT&T stores. Is it possible for him to have hacked into my phone and put some sort of bug in it? If this is possible, is it also possible for my phone to be able to record our conversation without a call being placed? If it is possible, how can I tell if my phone has been hacked?
    Thanks

    It would be extremely difficult for someone to be able to grab your iPhone out of your purse and hack into it without having a laptop computer with him with which to jailbreak the iPhone and time to work on it. I can't say it would be impossible, though. I'd suggest as a precaution you perform a Restore on your iPhone; if it restores successfully that would clear any jailbreak and remove any hack.
    http://support.apple.com/kb/ht1212
    Regards.

  • How can I tell if my macbook pro has been restored to factory settings?

    I just bought I brand new macbook pro (15,4 inch) from an official apple store... but I'm thinking that it may be used (it was a bit dirty when I opened it, but it has no scratches).
    I tried with coconut battery, but it went ok, the battery is new. However they might have changed it.
    Is there a way to know if the mac was restored to factory settings?
    ... if not, is there any other way to know if is a used laptop?
    Thanks,

    cycle count says 1... wich correspond to the initial battery discharge I just did. That's why I think they may have changed the battery.
    Serial number is C02FHFG0DF8V... how can you tell if this correspond to a refurbished unit?
    It has all the "official" envelops of a brand new mac... the thing is that I found small dust specks all over the interior of the box and in the accesories (not on the notebook itself).
    According to coconut "Age of your Mac" is 11 weeks.
    That's why I thought the only way I could knew for sure if they used it before (maybe for showcasing at the store) was finding out if it was restored to factory settings. (Also I bought it in an official apple store).

  • How can i control my new mac mini using my new macbook air? Thanks

    Hi, I would like to control and even file share my macmini using my macbook air... the mac mini is plugged into the family 50inch plasma... so getting access to it is not always easy! I'd like to play itunes, films, file share, just about do everything from the macbook air as if I was on and in front of the macmini... i'm hoping to do this from any country using wifi!
    I've looked at screens - vnc client, but can;t find anywhere where it says I should download the app... is there a master to download to the mac mini, then waht do i download to the macbook air to enjoy control... also am i expected to download twice and pay twice?
    I'm very new to the mac world... loving it, but lots to learn! Appreciate your help, thank you
    Chris
    PS... bonus if I can also control the mac mini using my iphone4 and ipad 2 (yup, my bank balance took a major hit.... apple certainly got me hooked!)

    Sceen sharing is built into the OS  go to your help in the finder and type in "screen sharing"
    To set up screen sharing: (on the mini)
    Choose Apple menu > System Preferences and click Sharing.
    Select the Screen Sharing checkbox.
    To specify who can share your screen, select one of the following:
    All users: Select this if you want to allow any user with a user account on your computer to share your screen.
    Only these users: Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Accounts preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list and click Select.
    Click Computer Settings and set the following options:
    Anyone may request permission to control screen: Select this to allow anyone on your network to request to share your screen.
    VNC viewers may control screen with password: Select this and enter a password that VNC viewer applications can enter in order to control your screen.
    It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

  • How can I connect a new mac mini to my old vga monitor? There doesn't seem to be a mini display port

    I have an old monitor with VGA port, and was wondering if anyone knows how to connect this to the new mac mini. Older mac minis have the mini display port, and if that were the case I would use the mini display port to VGA adapter, but this new mac mini doesn't have one. It just has the thunderbolt port or HDMI port for displays... I've been looking for an adapter to connect my display to one of these but cannot seem to figure it out. Any advice? Thanks in advance.

    The Thunderbolt port is the one to use; you use the same mini-DisplayPort adapter you used for the older minis.
    Regards.

  • How can I set-up my mac mini server to be a central file server for my windows boxes (they don't see the mac on the network), and how do I set-up a central iTunes server so that all my devices sync to the mac mini?

    I am looking for step by step instructions to configure my mac mini server to support the following:
    1. Central itunes server for all my devices (ipad, ipod, iphone, etc.)
    2. Central file server so that my windows devices can save and retrieve data from the central system (the mac does not show up in the network for the windows systems - all running windows XP or 7)
    Thanks,
    Keith

    You will need to enable file sharing in System Preferences
    as well as setting up sharing and permissions for the
    directories that you want shared.  You may also want to
    setup a non-administrative user or allow limited guest
    access.  The user would require entering a user name and
    password to make the connection, but would allow remotes
    to change files, if set up tat way.
    As for serving iTunes media, better to post in the iTunes forum.

  • How can i share folders at Mac mini late 2009 with Apple Tv 3?

    I'm using Mac mini 2009 and I can't share any folder with Apple tv 3...anyone managed to get a way to do so, so far?

    I have a WLAN at home conneting Mac mini (late 2009), PS3 slim and xbox 360 in the living room and I would love to share whats on the Mac mini with AT3 in the guest room upstairs, physically it wont be possible to control both screens at the same times. The files I have are on external HD connected via firewire + USB to Mac mini and they are a mix of avi, mp4, mpeg etc. I'm talking about 3 TB of movies and series (its still legal here in Dubai to download ;-)). starting to convert such amount of files its not an option. AirParrot is a good option when I have media stored on my MacBook pro and would like to play it no AT3 but I used Beamer it works great for such function.
    any ideas folks ?

  • How to tell if my mac mini has wireless

    I am a new Mac user. I have purchased a used Mac mini. Early 2006 I believe. It has a G4 processor. The box says it has airport and bluetooth. But when I turn it on and try to connect to the internet it says no connection. I ran the network diagnostic and the first question was "How do you connect to the internet"? There were a few options to select, but the airport option was grayed out, and not selectable. Does this mean it does not have wireless built in?

    The easiest would be to go to the About my Mac section (The apple icon on the upper left side of your screen). And let it show in details what kind of wireless connection is available.

Maybe you are looking for

  • New Thinkpad Yoga 12.5" cover got hardly removable stain

    I just bought thinkpad yoga a few days ago. I found out that there is either scratch or oil mark stick on the screen cover.  I was using my computer when eating burger, maybe I got oil stain on top of it, but I couldn't manage to remove it. I have al

  • What causes duplicates in iPhoto?

    I recently came back from a long trip overseas and imported all the photos from an SD card.  I seem to be getting multiples of the same photo.  Very frutrating as I want to create a slide show.  The duplicates also appear on my iPhone 5 and Ipad 2. H

  • FlashCC Keyboard shortcuts not working

    Hi, I've been using Flash ever since it was owned by Macromedia, and I can't seem to get my head around the keyboard shortcuts in CC. I used to be able to assign convert to symbol to page up and insert frame, keyframe and blank keyframe to F13, F14 a

  • Contract Account Custom view not called when replicating thru CRM

    Hi All, We have modified the Contract account screen through BDT. Functionality - We have a custom table, that needs to be updated during contract account creation when reference contract account is used for creation. The update is successful when cr

  • ExecuteWithParams not working in ADF BC SRDemo Tutorial

    Hi I have created View Objects with the Named Variable TheStatus as per the ADF BC Tutorial If i Open the SRList page and try to click on the Command Links for Open, Closed or Pending statuses the Results are not being filtered based on ExecuteWithPa