How can I tell if temperature issue is a fan or motherboard?

Here's my scenario. I have G4mdd 2x1.25. The original drive is still operating, but not the start up. Its on Tiger.I have 2 additional drives in other slots, one dead one for storage. I am actually booting off a WD External and backing up to the internal. Kind of backwards I know. Just recently, my mac starts shutting of after an hour. I rebooted to the internal original drive to get an internal temp. Its peaks at 56 C. How would I know if its fans or a power issue? My guess is to just replace the fan/s and see. Any other ideas?
thanks

OK, some more things to try...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, trash these files & reboot...
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
Have you done a PRAM reset, CMDOption+pr...
http://docs.info.apple.com/article.html?artnum=2238
Does it boot into Open Firmware with CMDOption+of ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
How to reset the SMU/PMU on a Power Mac Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939

Similar Messages

[p7-1240] How can I tell which graphics cards will work with my motherboard?

I recently went through the nightmare of trying to install a Gigabyte GTX 650 in my PC. After a few days of struggling and scouring the internet for answers, I discovered that it is incompatible with the BIOS on my motherboard, and HP does not offer BIOS updates. I returned the card and am now looking for a new one, but I am unsure of which cards will work now, since my computer met all of the system requirements for the graphics card, and It stil ldid not work. Since GPU manufacturers do not list BIOS specs under system requirements, how can I tell if a graphics card will work with my sytem?
My computer is a p7-1240 with an upgraded 520W PSU and approximeately 11" of room to install the card.
This question was solved.
View Solution.

Thexn, welcome to the forum.
The problem is, many of the newer video cards require the computer to have a full UEFI BIOS. HP began using one in mid-October, 2012. Before this date the BIOS is Legacy. This is why the video card didn't work with your computer.
I don't know what you want to spend for a card, but MSI makes a GTX 750ti that has a hybrid VBIOS. It has a switch to change to Legacy or UEFI. There is a video link directly below the picture of a card. Paul from Newegg gives a full description of the card.
I like EVGA cards the best. Their Tech Support has given me a lot of information about their cards. However, you have to go back to a GT 640 card to find one of their cards that doesn't require the UEFI BIOS. They do have some updates for their BIOS'es that solve the problem, but you have to call them for the exact cards.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

HT201272 Had some wifi issues while downloading an album. First 3 tracks... sound stops way early but continues the count. How can I tell iTunes to redo the first 3?

Had some wifi issues while downloading an album. First 3 tracks... sound stops way early but continues the count. How can I tell iTunes to redo the first 3? Any way to just fix it?

Hey davma1
All you need to delete the songs then go through the process of downloading the past purchase again.
Deleting files from the iTunes library and your computer
http://support.apple.com/kb/ht3842
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How can I tell if a sound is playing in Flex application?

Hi All,
Simple question but I can't seem to find an answer to. How can I tell if my Flex application is currently playing sounds from a SWF file?
What I'm trying to do is load a SWF file dynamically into my Flex app. However, these SWF files have sounds in them and they don't seem to stop even after I unload the SWF files.
I'm trying to get around this by stopping all sounds using the flash.media.SoundMixer.stopAll() but it's getting called too early, before the SWF files are fully loaded and rendered in the application.
I searched around and it seems like many people are having issues with this. Maybe someone can help me find a solution.
Thanks,
Colin

In player 10 you can use unloadAndStop()
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

How can I tell when an ical event was added?

I'm on a shared ical calendar and there are times when 2 events have been put on at the same time. How can I tell when the event was added and by who?
Thanks!

sharifrommo wrote:
I am concerned that someone used the card on a different account. I'm assuming based on what you indicate that it can't be traced?
If there is a legal issue I am sure Apple would properly respond if the records were subpoenaed, but short of that I do not know of a way.

How can I tell which catalog a missing image belongs to?

How can I tell which catalog a missing image belongs to?
Beating a dead horse.....Everytime I need "missing images" in LR4.2, I cannot access them, even though I am looking right at the location they presntly occupy because thye image is ALREADY IN ANOTHER CATALOG.
HOW frustrating is this...going on 8 months now. But I need the images and I suppose I could just go back and reprocess 10,000 images that are missing in my collections but I have tried many solutions offered over the months that are just impractical.
So Now I want to approach this thing from the other direction...
If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
How do I do this?
Any Ideas?

So Now I want to approach this thing from the other direction...
If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
How do I do this?
It sounds as if you have been using separate catalogs for sets of images which are in separate folders. Perhaps you have had good reason to do that. But I would now make three linked observations:
It seems that you are now more able to both find, and distinguish, things via a folder structure - rather than via whatever classification of different catalogs you may have thought were going to be helpful to you
accordingly, having these mutiple catalogs is now getting in your way
using folders works just the same inside one big catalog, as it does inside each of two smaller catalogs.
The solution to the first two, IMO, is to merge your separate catalogs into one catalog. Then the third will kick in. You can still keep the current separate catalogs for archive or reference purposes, but the "Import from Another Catalog" function will MERGE copies of all their contents into a combined, larger catalog that you can use going forward. (The images and folders themselves, do not change in any way when you do this.)
If you wish to track which catalog each image is currently inside, you could apply some kind of keyword across all images in that catalog, before carrying out the merge. However, it sounds to me as if your folder arrangement currently mirrors the different catalogs in some way anyway - and will continue to convey the same information once combined.
Lightroom is designed to be able to work with large numbers of images more or less the same as with small numbers; and this has been anecdotally confirmed in many cases. AFAICT the main performance issue is not the size of the database, but the size and nature of the image data involved and the complexity of things you do with that, per image, also the ability of your computer system to carry these operations out, per image. (Another overall productivity issue is: do you need to keep navigating to and opening different catalogs; or... not!)
Even if you merge catalogs and then change your mind about all or some of that, you can either: retain and go back to the previous un-merged catalogs - or: to preserve further work done since merging, you can use Export as Catalog to copy out a certain highlighted set of images. Then you can Remove what you wish from the main catalog - using the exact same means of identifying which images require this - for example, the image set you have only just exported to a new catalog will still be highlighted inside the source catalog.
RP

PLEASE HELP! How can I tell if my Imac has been hacked?

PLEASE HELP! How can I tell if my Imac has been hacked? I see a few people have asked this question but the responses tended to be advice on what to do once you've been hacked, not what can done to find out if you have been hacked. I have a late 2012 model imac. My sharing was off and remote logging was off. I use an external router that send wireless to about 4 consoles in the flat. I don't think I have any firewalls up (now looking like a mistake). I think I'm possibly being hacked due to abnormal behaviour and most recently my camera was turned off all day (no LED) then I went to record something on Photo Booth, the application popped up displaying an image of me getting dressed (nightmare!) which happened hours earlier when the camera was off. This image quickly then disappeared and the camera began working normally. Very strange and alarming. Please help me. Any advice would be very much appreciated. Thanks.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How can I tell how many emails I have on my iphone now that I have installed the update?

How can I tell how many emails I have on my iphone now that I have installed the update?

Your current camera roll is stored in iCloud via the backup, and the photos in Photo stream are also stored in iCloud for about 4 weeks.
However, once you delete them on your iPad, they will disappear from your backup the next time it runs.
The best way to sort your issue out is to:
1) Connect a Windows or OS X computer to Photo Stream. This will get your current photos onto your computer.
and/or
2) Connect your iPad to a Windows or OS X computer through the USB cable, and sync the photos across before deleting them from your iPad. This will get photos and videos.
This help article is useful: http://help.apple.com/icloud/index.html?localePath=English.lproj#mmbc40255b
Cheers,
Rodney

How can I tell all PCs has the DAU installed?

I am running ZCM 10.3 on SLES 10. I have enabled patch management and I saw the DAU has version 38. How can I tell version 38 is the latest DAU for ZCM 10.3.
Also, how can I tell all devices have the latest DAU installed? I came across a few devices have problem with ZCM agent and after I fixed the issue, I saw it started to install the DAU. However, if I have not touched that managed devices, I would not know there is a problem. Can I check all devices status with DAU on ZCC?
Regards
Andy

andyj2009,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Re: How can I tell how old my computer is?

How can I tell how old my computer is

I shortened the following for you:
Before Posting
A detailed message with the following information:
Product Name and Operating System
How do I find my product name and number
Description of the problem including:
Error messages, if any
Any changes made to your system before the issue occurred
Do not include the product serial number or any private information
Read more: Advice for Asking the Very Best Question
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

How can I tell when my macpro was bought or made?

How can I tell when my macpro was bought or made?

Mac Pro (desktop) issues should be asked in its forum area. This area is for Macbook Pro issues.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

The amount of storage that is shown on the box and in Settings are calculated differently - the package uses 1 billion bytes as a gig (i.e. decimal), whereas in Settings it's shown as the binary definition : http://support.apple.com/kb/TS2419
Also some space has been used for iOS, the built-in app and some space is lost due to formatting.

How can I tell what is "Auto Launching"

User's (me) tech background:
Fairly technical user here, but getting pretty rusty. In a past life (late '90s) I was a network administrator as well as server admins for NT 4, Novell (up to 4.11), AIX, and HP-UX servers. Used to be really good at a command prompt ($ or #) in AIX and HP-UX as well as MS DOS. I do have ROOT enabled on my Macs and I am not afraid to use it. However, I know how severe the consequences can be (trashed a customer's AIX server once using a -R switch in the root directory), so I am extremely cautious and must be confident of the instruction. Can probably fix most anything with some guidance........
Here is the problem........ I have recently developed an error on boot, say within the last couple of weeks, where it tells me that some Vista application won't run because VM Ware will not initialize. The problem is VM Ware is not loaded on this computer (15" MBP model 8.2, i7 processor, 16MB of RAM, OS 10.7.4........ bought as a "refurb", never had a problem, have used this workstation for several months now). Boot Camp is not configured on this machine either. Nothing is in the Dock that would knowingly trigger this. When I go into System Information, I find nothing set as a "Startup Item" (screen shot attached) , making me think that I am looking in the wrong place. Where should I be looking?
Interesting enough, when I go to System Information, and look under "Applications", I do see a lot of Vista items, including apps from an older MBP that I do not connect to (on same network, they have "rights" to connect, I just never do as there is nothing on there I need). I have attached a screen shot of this as well.
Please, someone, can you give me some advice here?
How can I tell where this auto loading of this Vista app is coming from
How do I get rid of it
Why did it happen "suddenly"?
Can I go into System Info/Applications and delete any Vista or VM Ware apps?
If I cannot do this via "System Info" can I remove (rm OR mv) the files from whichever system directory stores this data?
This is puzzling and quite concerning. I would be deeply grateful if there is a "Yoda" out there that knows how to fix this.......
Thanks in advance,
Bill

Managing your data usage is very important Bag02231958. I would like to thank ttipgem for the great suggestion to see what is using data on your phone. However, when you access the internet, social media apps, stream data, videos, music, etc. that uses data on your phone. Unfortunately, we do not have a list of what specifically is being accessed on the device to incur data. You do have the ability to view data records and time frames online via My Verizon http://bit.ly/xB4iTc
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

How can I tell if temperature issue is a fan or motherboard?

Similar Messages

Maybe you are looking for