How can I tell if Time Machine backed up applications?, How can I tell if Time Machine backed up applications?

Hi - I have backed up my daughter's Macbook using Time Machine - I think it did backup applications, for I can see a folder on the backup external disc. Before I erase the Mac HD, I want to ensure I've done it correctly. Is the presence of an Application Folder within the Time Machine backup all I need to see to ensure that all programs will back up once I reformat the Mac with Snow Leopard? Thanks for your help.
Mike

When you enter Time Machine and navigate to a snapshot, you see only applications? Nothing in your home folder, for example?

Similar Messages

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

I went to Mac Store and had replaced hard drive because I encountered 4HDD ERROR(hard drive failure). I had backed up my old hard drive by TIME MACHINE regularly. Now how can I restore everything I had?

I went to Mac Store and had replaced hard drive because I encountered 4HDD ERROR(hard drive failure). I had backed up my old hard drive by TIME MACHINE regularly. Now how can I restore everything I had?

Thanks for your response.
I had tried COMMAND+ALT+R which led me to directly to INTERNET RECOVERY via wifi. After 1 hour or so it dropped me at the same point.
I've tried MIGRANT ASSISTANCE as well, it kept on LOOKING FOR OTHER COMPUTERS even though I clicked on TIME MACHINE BACK UP USING EXTERNAL HARD DRIVE
so what to do now?
P.S. Guys at MacStore were so careless to even listen to me when I asked them about retrieving back up :(
Please help

TS3991 i deleted a pages doc and my time machine was NOT on. Can i get it back? if so how?

i deleted a pages doc and my time machine was NOT on. Can i get it back? if so how?

If you backed up the phone when the video was still on it, restoring the backup will get it back. However, anything new on the phone since the backup will be deleted.
iOS: How to back up and restore your content

TS1550 Back up to time machine failed. Error, "Files can't be copied onto the backup disk because it appears to be read-only". Back up has been working. drive is not read only. How do I fix this?

Back up to time machine failed. Error, "Files can’t be copied onto the backup disk because it appears to be read-only". Back up has been working. drive is not read only. How do I fix this?

Hello,
http://pondini.org/TM/C6.html

Time Machine does not recognize my iMac backup. Reports: not enough space; can't back up. How do I get it to recognize the backup?

Time Machine does not recognize my 430 GB iMac backup on 1 terabyte Time Capsule. Reports: not enough space; can’t back up. How do I get it to recognize the old backup and continue backups?

Thanks for the Time Machine Troubleshooting link. Apparently things have changed since 10.7.0. Backups.backupdb doesn’t exist. Path now is: Time Capsule/Data/Daru’s iMac.sparsebundle. So I did Terminal (I usually avoid Terminal) using the instruction in B6. It does not appear to be working. It went through looking for backup, preparing backup, and is now stopping backup, and the TMBackup has disappeared from the sidebar.
Well, just now Time Machine progressed to preparing backup again; the Tiime Machine Backups appeared in sidebar, and with it Backups.backupdb/Daru’s iMac/2012-04-21-112939.inProgress. So it does exist... I’ll let it run, see what happens... But that is a strange date. Today is 28.
I’ll let you know the outcome.
Oops. Just ended! Real time report: “Backup too large for disk...“ So it is not recognizing the old backup. I’ll look at those instructions again, see if I can do the Terminal thing with the backup running. I doubt I can damage anything except the existing baackup which I'll lose anywy if I can’t achieve recognition.
Daru

I delete the time machine in my desktop how can i put it back

I delete the time machine in my desktop how can i put it back?

Hi, please open the 3-bar menu > Customize, and if you can see the Home icon, you can drag it to a location of your choice > Exit Customize to save.
This [https://support.mozilla.org/en-US/kb/how-to-set-the-home-page How to set the home page] article may also be of help.
Hope that resolves your problem.

HT201250 If I wish to see the contents of my I photo in a time machine back up I am getting a 'cant see because its in a Time Machine back up so how can I be sure that I can delete some photos from my mac

I have used Time machine back up and as I wish to delets photos on my I mac I want to confirm that I have backed up ok. However when I go into Time Machine and attempt to open I photo I get the message ' cant see becasue its in a time machine back up'.
How do I get to see whats in the back up... any of them

Time Machine is backup, not an archive. You should not use it to keep permanent copies of things you have deleted from your main disk. Once the original is gone, the Time Machine copy will not last forever. If you want to keep a permanent copy of a photo "offline", you must make a copy of it somewhere.

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

Working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?

working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?

Well first you have to figure out what is wrong with the machine and solve that problem first.
Your post is very vague on what occured, and there are many types of "crashes" it really depends upon what see on the screen and what the hardware does, we can't see it to tell you, so you have to tell us.
I suggest you run through these user tips and provide more information about your hardware.
Disconnect the TimeMachine drive for now
..Step by Step to fix your Mac
Help us to help you on these forums
Create a data recovery/undelete external boot drive
If this is going way over your head, there are local PC/Mac techs that will assist you for a fee, Apple only does hardware repairs and is advised to use them if you discover it is, especially if under warranty/AppleCare.
Hard drive and RAM upgrades can be handled yourself or by a outside tech in many older models of Mac, but don't expect Apple to cover the new parts.
Install/upgrade RAM or storage drive in Mac's

I just bought and backed up my computer and time machine with a "Seagate BackUp Plus for Mac". Now my time machine is empty. Panicked. can anyone help?

I just bought and backed up my computer and time machine with a "Seagate BackUp Plus for Mac". Now my time machine is empty. Panicked. can anyone help?

Lets start over...
Please restart the network.. shut down everything..
Restart in order.. modem.. router.. if different to TC.. or TC.. client devices.. wait 2min between each startup.
If the TC does not show up on the computer, in finder.. then we need more info.. what OS are you running?
Does the TC show up in Airport utility? Are you running wireless or ethernet?
If you still have issues.. plug the TC directly into the computer by ethernet.
Do a full factory reset of the TC.. and see if it now shows up.
Please tell us exactly what model TC it is and how old.. the A1xxx model number from the base will help if you don't know.
You take a screen shot of the TC opened in finder.
eg..
My TC is named Tardis4.. click on it.. and then open the data folder.. on this one called Tardisdata.
Then take a screen shot of it so we can see what the problem is.. screenshot.. with area selection.. control + shift + 4 .. the picture goes into the desktop.. and then you click the picture icon in the posting web page controls and select the picture.

How can i transfer data from old MacBook Pro, which is too old to update time machine, to the newest MacBook Pro?

I recently bought a new MacBook Pro, and wanted to transfer all the data from my old MacBook Pro, but I get the message saying I need to update time machine on my old one in order to use time machine. However, my old one is too old to update. So I decided to use the cable to transfer, because I heard I can do it that way even though it could take time. But I have no idea what to do...
Can someone help me?

A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
Repair the hard drive and permissions using Disk Utility.
Backup your data. This is vitally important in case you make a mistake or there's some other problem.
Connect a Firewire cable between your old Mac and your new Intel Mac.
Startup your old Mac in Transferring files between two computers using FireWire.
Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

The external drive must be connected to the Mac using either USB or FireWire
You must remove the external hard drive from the list of items that are "excluded" from backups in Time Machine Preferences.
Here's how:
Open System Preferences (gear icon on the dock)
Open Time Machine
Click Options
Look for the name of the hard drive in the list of "excluded" items and click on it to highlight it
Click the -- (minus) button at the bottom of the list to remove the hard drive from the list of "excluded" items....so it will now be backed up
Strongly recommend that you do the first backup using Ethenret from your computer to the Time Capsule since the entire contents of the external drive will be copied on the first pass. Ethernet will be 3-5 faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will nornally be much smaller....unless you add large files to the external drive.

Time Capsule/usb hard drive- How to get Time Machine to back it up

I installed Time Machine with no problems. A 1 TB LaCie hard drive is attached by usb cable to the TC. The LaCie is seen by finder and I can open, edit and save files to it and so can the Macbook Pro on my network.
Time Machine backed up my internal hard drive on my Mac just fine, but Time Machine refuses to see the external Lacie drive so it cannot back it up.
Here is the situation:
1. If I go to Time machine preferences and click Options there are no volumes or folders listed as Do Not Back Up. nothing is there.
2. If I click Change Disk the name I gave my Time Capsule is listed as it should be but the LaCie drive is listed also as if it were possible for me to back up to that also. The LaCie's name is there with the name of the Time Capsule in parenthesis. Isn't that odd?
3. When I select the LaCie icon on my desktop and select Get Info in the Sharing & Permissions section it says, "You have custom access" below it says
Name Privilege
(unknown) Read & Write
everyone No Access
I am new to Mac in general and this permission and sharing thing is still a bit mysterious to me so I don't know if these sharing & permission settings are usual or weird and could be contributing to why the back up of the LaCie drive is not happening.
This is the final hurdle I have in absolutely convincing my small but vocal office that switching to Macs all around was a great idea.
Any help would be appreciated.

This is a really odd answer.
I have Time Capsule, I add an external drive to it and you say that to back up THAT disk on Time Capsule I need other programs/solutions? This is really a stupid thing.
1 TB of storage space just for local files right now that on every wireless product you can add an external disk?
In other words with Apple products I can have all my laptopsappleTvdesktops all wirelessly connected but I can't use Time Capsule to back up datas if disks are not locally attached? With Airport Extreme/Time Capsule I can share datas (music, pictures, my digital life files) with my family computers but if I do this I can't back up these files.
And just to know how many do I have to spend on other Apple devices, what are these "other solutions" to back up network drives? A server?

How can I tell if Time Machine backed up applications?, How can I tell if Time Machine backed up applications?

Similar Messages

Maybe you are looking for