How can I tell what devices are connected to my e2000

I have a cisco e2000.  I just turned off guest access, but 'cisco connect' says I still have 4 devices conneted to my router.  Is there a way I can tell what those devices are?
Also, even thoug the setup said my guest access had a password, I found out it did not.  Any concerns about nosy neighbors?

Try to install Network Magic. It will show you what are the devices connected to your router. You can download it from here.

Similar Messages

  • How can i tell what devices are accessing my iMessages?

    I suspect someone has set up an iPad to download my iMessages without my authorization. How can I tell what devices are linked to my phone's iMessaging?

    Thank you both. I am changing my password...I was just hoping there was some way I could tell if this other person had been reading my iMessages up to this point. It seems like there is not. How about this scenerio: I turn off the iMessaging on my phone. I have someone who has iMessaging send me an iMessage. We see if their device registers their message as "delivered" even if it doesn't come through to my phone. Would that indicate then that it had been delivered to another device?

  • Help!!! How can I see what devices are connected to my icloud

    How do I know what devices and computers are linked to my icloud? Used it once at my ex boyfriends house on his computer and I think my photo stream is going to his desktop??? How can I tell and if so disconnect from it?

    My brother asked me for my account one day but i don't know if he used it to connect icloud or to just download an app. I just want to see if his device is connected to my icloud and if so, i want to disconnect him. So is there any site or anything i can do to see what devices are connected?

  • How can i see what devices are connected to my icloud?

    I want to know if pictues from my mac are on any other devices. How can i see what other devices i have connected to my icloud?

    My brother asked me for my account one day but i don't know if he used it to connect icloud or to just download an app. I just want to see if his device is connected to my icloud and if so, i want to disconnect him. So is there any site or anything i can do to see what devices are connected?

  • How can i find what devices are connected to my airport router

    We have dishnetwork for our internet and the last 2 months we have exceeded our usage.  I wanted to know if there was a way to see what was using all of our data.

    Not on an Apple router.

  • How do I see what devices are connected to my iTunes

    How do I tell what devices are connected to my iTunes

    You can't see what devices and/or computers that your account is logged into, all you can do is see which (if any) are associated to your account : iTunes Store: Associating a device or computer to your Apple ID.

  • How can I tell the device is connected to itunes 12?

    how can I tell the device is connected to itunes 12?  I have Windows 8.  I hear that the device is connected, but don't see the device to manage.  Only thing that happens is on the phone it says Trust the computer..   I say Trust and nothing happens.

    in ituens at the top where you see the small icons for Music, Movies, TV etc when your device is connected you will see a small icon representing your phone or ipad etc popup click that and it will show you the usual interface for backup and syncing.
    if that doesnt happen, like it didint for me initially, you should close itunes fully via task manager if you know how to do this and start it again with the device unplugged then plug it in after itunes has finished loading.
    Worst case scenario you nee to resatrt

  • How can I see what devices are linked to my iCloud?

    how can I see what devices are linked to my iCloud?

    You can see which devices are currently set up and/or logged in by signing in at iCloud.com on your computer.  Then click the Settings icon or select your name from the top right, then select iCloud Settings. A list of devices using your account will be displayed.

  • How can i see which devices are connected to my wireless network?

    how can i see which devices are connected to my wireless network?

    Login to your router and view the DHCP clients.

  • How do i identify what devices are connected to 101, 102, etc on my air port extreme?

    How do i identify what devices are connected to 101, 102, etc on my air port extreme?

    Depending on whether a device is connecting using Ethernet or wireless, you need to know the Ethernet ID or AirPort ID of the device. That is the number that is associated with the IP address that is displayed in AirPort Utility.
    For example, if you have a Mac....
    Open System Preferences (gear icon on the dock) and open Network
    Click on AirPort , then click Advanced at the lower right
    The AirPort ID of the Mac is displayed at the bottom of the window
    For the Ethernet ID, click on Ethernet, then click Advanced, then click the Ethernet tab
    The Ethernet ID is displayed at the top of the window
    On an iPhone.....
    Tap the Settings icon, tap General, tap About, then scan down to locate Wi-Fi Address, also known as the AirPort ID.

  • I just got an IPAD2 on Saturday.  With the Mac, I could always tell when programs were open/running by going to the menu bar.  How can I tell what programs are running in the background.  I am struggling with not being able to go to a menu bar at the top

    I just got an IPAD2 on Saturday.  With the Mac, I could always tell when programs were open/running by going to the menu bar.  How can I tell what programs are running in the background.  I am struggling with not being able to go to a menu bar at the top

    You can see which apps are open and/or recently used by double-clicking the home button to bring up the taskbar at the bottom of the screen (not all apps that appear there are active) - you can then close apps on it by pressing and holding one of them for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar. If you have an app 'open' on-screen then it won't appear on the taskbar, you will need to go back to the homescreen first, and it should then show when you next open the taskbar.
    If you haven't already got a copy then you can download the iPad manual from here : http://support.apple.com/manuals/#ipad

  • HT4910 how can i find what devices are sync to my laptop as mine is saying 5 i dont no why

    how can i find what devies are synced with my computer as in itunes says 5 i dont have 5

    That information is not available.
    De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
    For more information on authorization and de-authorization: iTunes Store- Authorize or deauthorize your Mac or PC.

  • How can I tell what files are in Workspaces?

    The email notice says to download your Workspaces files - before Jan 6, 2015. How can I tell what files I have in Workspaces?

    See
    FAQ: Adobe Workspaces is being retired
    Sign in | Acrobat.com - Workspaces

  • How can i tell what computers are authorized with my itunes account?

    My iTunes app tells me that I have 5 computers currently authorized with my account. How can I tell which ones they are???  I've checked all of my old desktops and laptops to deauthorize them but they indicate that they were never authorized.  Confusing. Why go to the trouble managing how many are authorized if you don't provide a means to list them???  I realize that I can deauthorize them all (the only choice!) but, in doing so and reauthorizing the ones I need, does this mean that I lose the ability to access previously purchased music on them??  I must say that, for the ease of use of the Apple apps, I expected more.  Thanks:-) !

    You cannot. You can see the number of authorised machines.
    Go to itunes Store, Select Account from Quick Links on the right.
    If you already have 5 authorised but can't remember which the machines are you have the option of once every 90 days to deauthorize all comuters and then individually reauthorising the ones you want.
    On each machine in iTunes Click Store > Authorise this computer

  • HT204023 How can I see what devices are attached to my hotspot?

    I'd like to know what devices are attached to my hotspot.

    Unfortunately there is no way to see the IP, MAC, Hostname, etc. of the devices connected to your iPad's personal hotspot. Sorry. Hope this helps.

Maybe you are looking for

  • While making a payment am getting the error.

    Hi All, While making a payment am getting the error. Error Details: APP-SQLAP-10000:ORA-20001:APP-FND-00466 FND_CONCURRENT.GET_REQUEST_STATUS cannot find your concurrent request 943570. This is my payment batch details: BatchName PaymentDate Status E

  • IPod Touch 4gen not seen in las test iTunes. Also will not accept my Apple ID pw

    iPod Touch 4gen not seen in las test iTunes. Also will not accept my Apple ID pw

  • Macbook pro sporadically freezes when iTunes is open

    When I open iTunes, even if I'm not playing or using it in any other way, my Macbook programs will freeze for 10 or so seconds every couple of minutes. It doesn't happen at regular intervals. I can move the mouse, but when it's hovering over programs

  • Encrypt some fields in an Idoc

    Anyone know if it's possible to encrypt only some of the fields in an IDoc which we would like to send to an external system where they can decrypt the fields. We will use the Basic type HRMD_A05 and the fields to encrypt is among other things person

  • ICal ignores time zone in published calendar

    I'm trying to make a an online calendar that is automatically generated using events from a database. All events are in the Dutch time zone, so I added a time zone component to the .ics file. When I try to subscribe to the calendar in iCal everything