How can I tell which itunes charges come from each phone?

I have several iPhones dedicated to my iTunes account.  Recently, I've had several charges made for a game that both of my sons play.  Is there a way to easily determine which charges were made by each phone, even if they are under the same iTunes account?

The iTunes purchase history is per account,  It does not state which device made the purchase.
Is there a way to easily determine which charges were made by each phone, even if they are under the same iTunes account?
Yes.  Ask your sons.  If you don't trust them that much, remove your credit card from the account and change your password.  Seriously.

Similar Messages

  • HT4914 How can you tell which songs are downloaded from the cloud on an ipad

    How can you tell which songs are downloaded on the iPad from the cloud?

    I know ipad albums are more like tagging photos rather than putting them in folders. I just have a nagging feeling I missed some pics and I have too many to try to go figure out one by one. I don't look at my photos from the camera roll, only from albums I tagged just because I imported photos from different sources and the dates and order is really messed up. I just want to know that I am viewing all the photos from like this vacation or that event and there's none I missed that are only in the camera roll.

  • When i send an IMessage it say's its coming from my email how can i change it so it comes from my phone

    How can I get my phone to send IMessages from my phone and not my email ?

    I had the same problem, but it was only doing it to one contact. I found an answer that worked for me in a previous post. Go to settings/messages/received at and then click on your apple id on the top of the screen and log out. Then log back into your apple id account by going to the messages screen and choosing to log in. You will want to turn your imessage off and back on again once your logged back in to reset it. That should work. If that doesn't fix it there is also a caller id option on the bottom of the same screen settings/messages/received at and make sure your phone number is selected rather than your email address. I hope this helps.

  • How can I tell which optional extras come with MSI cards?

    I was about ready to buy an MSI 9800GTX but then I quickly realised that MSI have at least four optional extras for this card and I have no way of knowing what card comes with what. 
    MSI's description:
    MSI 9800GTX
    Optional extras: External SPDIF Cable, Internal SPDIF Cable, HDMI Cable, DVI/HDMI Adapter
    Retailer's sites:
    Aria
    CCL
    Komplett
    Dabs
    Scan
    Now can anyone spot any clues as to which extras come with those cards? 

    Quote from: r2d2d3d4d5 on 05-April-08, 21:48:41
    Thanks guys. Where I am we don't have that many shops that sell this kind of electronic equipment. The only shops around here are all run by PC World and none of them sell the 9800GTX (they only sell one make of GX2 for example). That's why I have to depend on web retailers. I tried calling MSI UK (they don't seem to offer an email service) but there was no one there - I'm guessing they're closed at the weekend. I might try again on Monday. 
    I know how you feel. PC World are an utter rip off, I would NEVER(!!) buy from there.

  • How can I tell which songs have been iTunes matched?

    When first using iTunes Match, how can I tell which songs were 'matched' and which were simply uploaded?

    Simply turn on the iCloud Status and iCloud Download fields on your library view - you can then see whether the Song is 'purchase', 'matched' or 'uploaded'.

  • I have lots of duplicate songs in ITunes. How can I tell which ones were purchased vs ripped?

    I am trying to delete duplicate songs in iTunes library. How can I tell which ones were iTunes purchases and which ones I ripped from CD's.

    If you turn on the Kind column your purchases will read Purchased AAC audio file or Protected AAC audio file.
    BTW I've written a script called DeDuper which can help remove unwanted duplicates. See this  thread for background.
    tt2

  • How can I tell which apps were purchased on my account?

    I did search for answers but couldn't find one that fit.
    I have an iPhone and so does our son. 
    Early on my son purchased apps on my account and downloaded them on HIS iphone.  Eventually, I got him his own iPhone account and so he has also purchsed apps on his own account and downloaded them on his phone. 
    When we open iTunes and connect his phone, there is a list of apps that are on his phone.
    QUESTION
    How can we tell which apps were purchased on HIS iTunes acct and which were purchased on MY iTunes acct? 
    I don't want to DO anything with the apps, I just want to know one from another. 
    Thanks in advance!!

    List of authorized computers - https://discussions.apple.com/thread/4090165 - there isn't one.

  • How can I tell which machines need a given patch?

    So when I run WSUS and view the Updates Report I can type in the specific patch I'm working on (MS14-066) and it tells XX computers have it, YY computers need it, etc.
    How can I tell which are the YY computers that need the patch so I can go fix them up?  Is there an easy way to do that?
    Thanks.

    How can I tell which are the YY computers that need the patch so I can go fix them up?
    Run the Detailed View version of the report. There will be one (or more) pages for each update. The detailed pages list each computer, the approval status, and installation state.
    However, the conventional way to address this question is to create target groups based on some classification of how you would approve updates (e.g. Desktops, Win2008R2, .NET4) and approve the updates for the *groups* of computers that should install the
    updates.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • How can you tell which computer that is authorized as the master?

    I have several computers that I have connected my iPhone to. How can I tell which computer I should connect to before updating the operating system? I don't want to loss data if I don't have to.

    I am not that familiar with Apple and iTunes and was getting help from someone who said that I can plug my iPhone into my computers but that I would have to authorize the iPhone on each but the limit is 5.
    This is not accurate.
    You can authorize up to 5 computers with the same iTunes account. There is no device limit for the number of iPods, iPads, and iPhones that can be synced with the same iTunes library and iTunes account on the same computer.
    An iPhone can be synced with an iTunes library on one computer only, and photos can be transferred from one computer only. When transferring iTunes content and photos from another computer, all iTunes content and photos transferred from a different computer will be erased from the iPhone first.
    This is why I asked - you have connected your iPhone to each one of these computers for what?
    I was not sure which computer I first used. Is there a simple way to check?
    No, or I would have provided that with my first reply.
    If you connect your iPhone to a "non-master" computer to install the update, you will be provided a warning.
    How many computers are you talking about? If 5 or less, this should take you no more than 10 minutes to determine which computer you transferred music and photos from.

  • HT1420 how can i tell which computers have sharing on it

    how can i tell which computers have itunes sharing on it, i am at my limit but dont have five computers

    You cannot.  There is no list.
    Deauthorize all then authorize the active ones.

  • Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

    Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

    Not sure how I would tell if the contacts are stuck, but they look normal. The other stuff:
    Battery Information:
      Model Information:
      Serial Number:    W0046Q08UBX0A
      Manufacturer:    SMP
      Device name:    bq20z451
      Pack Lot Code:    0000
      PCB Lot Code:    0000
      Firmware Version:    0201
      Hardware Revision:    000a
      Cell Revision:    0157
      Charge Information:
      Charge remaining (mAh):    3211
      Fully charged:    No
      Charging:    No
      Full charge capacity (mAh):    5845
      Health Information:
      Cycle count:    943
      Condition:    Normal
      Battery Installed:    Yes
      Amperage (mA):    -1354
      Voltage (mV):    11210
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):    10
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    10
      Wake On AC Change:    No
      Wake On Clamshell Open:    Yes
      Wake On LAN:    Yes
      Display Sleep Uses Dim:    Yes
      GPUSwitch:    2
      Battery Power:
      System Sleep Timer (Minutes):    10
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    2
      Wake On AC Change:    No
      Wake On Clamshell Open:    Yes
      Current Power Source:    Yes
      Display Sleep Uses Dim:    Yes
      GPUSwitch:    2
      Reduce Brightness:    Yes
    Hardware Configuration:
      UPS Installed:    No
    AC Charger Information:
      Connected:    No
      Charging:    No

  • How can I tell which pictures have both raw and jpeg?

    if I import with jpeg as master, how can I tell which photos also have a raw version?

    To ways, one create a filter with file type set to RAW+JPEG, two look at the badges on an image, a badge with an 'R' in it indicates the image is part of a RAW+JPEG pair and the RAW image is the master, if its a 'J' the JPEG is the master.

  • How can i tell what itunes version i'm running?

    how can i tell what itunes version i'm running?

    Mac OS 10.0 – Cheetah
    Mac OS 10.1 – Puma
    Mac OS 10.2 – Jaguar
    Mac OS 10.3 – Panther
    Mac OS 10.4 – Tiger
    Mac OS 10.5 – Leopard
    Mac OS 10.6 - Snow Leopard
    Mac OS 10.7 – Lion
    Mac OS 10.8 - Mountain Lion
    Mac OS 10.9 - Mavericks (This release marks the beginning of a change in the naming scheme of OS X, departing from the use of big cats and moving to names based on places in California.Following the new naming scheme, the current version of the operating system is named Mavericks, after the surfing location in California.)

  • How can I tell which catalog a missing image belongs to?

    How can I tell which catalog a missing image belongs to?
    Beating a dead horse.....Everytime I need "missing images" in LR4.2, I cannot access them, even though I am looking right at the location they presntly occupy because thye image is ALREADY IN ANOTHER CATALOG.
    HOW frustrating is this...going on 8 months now. But I need the images and I suppose I could just go back and reprocess 10,000 images that are missing in my collections but I have tried many solutions offered over the months that are just impractical.
    So Now I want to approach this thing from the other direction...
    If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
    How do I do this?
    Any Ideas?

    So Now I want to approach this thing from the other direction...
    If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
    How do I do this?
    It sounds as if you have been using separate catalogs for sets of images which are in separate folders. Perhaps you have had good reason to do that. But I would now make three linked observations:
    It seems that you are now more able to both find, and distinguish, things via a folder structure - rather than via whatever classification of different catalogs you may have thought were going to be helpful to you
    accordingly, having these mutiple catalogs is now getting in your way
    using folders works just the same inside one big catalog, as it does inside each of two smaller catalogs.
    The solution to the first two, IMO, is to merge your separate catalogs into one catalog. Then the third will kick in. You can still keep the current separate catalogs for archive or reference purposes, but the "Import from Another Catalog" function will MERGE copies of all their contents into a combined, larger catalog that you can use going forward. (The images and folders themselves, do not change in any way when you do this.)
    If you wish to track which catalog each image is currently inside, you could apply some kind of keyword across all images in that catalog, before carrying out the merge. However, it sounds to me as if your folder arrangement currently mirrors the different catalogs in some way anyway - and will continue to convey the same information once combined.
    Lightroom is designed to be able to work with large numbers of images more or less the same as with small numbers; and this has been anecdotally confirmed in many cases. AFAICT the main performance  issue is not  the size of the database, but the size and nature of the image data involved and the complexity of things you do with that, per image, also the ability of your computer system to carry these operations out, per image. (Another overall productivity issue is: do you need to keep navigating to and opening different catalogs; or... not!)
    Even if you merge catalogs and then change your mind about all or some of that, you can either: retain and go back to the previous un-merged catalogs - or: to preserve further work done since merging, you can use Export as Catalog to copy out a certain highlighted set of images. Then you can Remove what you wish from the main catalog - using the exact same means of identifying which images require this - for example, the image set you have only just exported to a new catalog will still be highlighted inside the source catalog.
    RP

  • Under manage devives, how can I tell which device is which?

    Under manage devices, I have 10 devices and I want to remove some but how can I tell which device is which? I have 6 Iphones on there but they all have the same name so how can I tell which Iphone is associated with a certain number so I don't remove the wrong phone? Please help!

    Remove all of them. Then hook one at a time to the computer. Give each a different name.

Maybe you are looking for